A meso-microscale mazars-like damage model for heterogeneous cement-based materials at early age
Luciene de Souza Kichel; Tiago dos Santos; Rodrigo Rossi
Complas 2025 2025
Show BibTeX
@inproceedings{kichel2025a,
title = {A Meso-Microscale Mazars-like Damage Model for Heterogeneous Cement-Based Materials at Early Age},
author = {Luciene de Souza Kichel and Tiago dos Santos and Rodrigo Rossi},
year = {2025},
booktitle = {Complas 2025},
address = {Barcelona, Espanha},
keywords = {mef, ensaios},
}
Master's dissertation
A multiobjective optimization framework for the design of multi-material mooring ropes of floating offshore wind turbines
Gabriel Rodrigo Hilgert
2025
Advisor: Felipe Tempel Stumpf
Show BibTeX
@mastersthesis{hilgert2025a,
title = {A Multiobjective Optimization Framework for the Design of Multi-material Mooring Ropes of Floating Offshore Wind Turbines},
author = {Gabriel Rodrigo Hilgert},
year = {2025},
school = {Programa de pós-graduação em Engenharia Mecânica},
keywords = {mef, vibracoes},
}
Article
A novel topology optimization sizing design method applied to a two-pile cap structure with a full nonlinear comparison
Rodrigo Reis Amaral; Herbert Martins Gomes; Jorge Luis Palomino Tamayo
@article{gomes2025a,
title = {A novel topology optimization sizing design method applied to a two-pile cap structure with a full nonlinear comparison},
author = {Rodrigo Reis Amaral and Herbert Martins Gomes and Jorge Luis Palomino Tamayo},
year = {2025},
journal = {Computers & Structures},
volume = {315},
pages = {107823},
doi = {10.1016/j.compstruc.2025.107823},
issn = {0045-7949},
date = {2025-08},
keywords = {vibracoes, otimizacao, transdutores},
}
Article
A numeric-experimental study on damage parameters for crack propagation using the Finite Element Method Updating approach
Bruno Bruscato Schmidt; Daniela Scorza; Camilla Ronchei; Jakson Manfredini Vassoler
@article{schmidt2025a,
title = {A numeric-experimental study on damage parameters for crack propagation using the Finite Element Method Updating approach},
author = {Bruno Bruscato Schmidt and Daniela Scorza and Camilla Ronchei and Jakson Manfredini Vassoler},
year = {2025},
journal = {Composite Structures},
volume = {374},
pages = {119702},
doi = {10.1016/j.compstruct.2025.119702},
issn = {0263-8223},
date = {2025-12},
keywords = {compositos, mef, bioengenharia},
}
Conference paper
A numerical-Experimental approach for multi-matrix fiber reinforced composites characterization using FEMU
Rodrigo Motta Dartora; Tales de Vargas Lisbôa; Jakson Manfredini Vassoler
Proccedings of the 18th international conference on advanced computational engineering and experimenting, p. 1–1 2025
Show BibTeX
@inproceedings{dartora2025a,
title = {A numerical-Experimental Approach for Multi-Matrix Fiber Reinforced Composites Characterization using FEMU},
author = {Rodrigo Motta Dartora and Tales de Vargas Lisbôa and Jakson Manfredini Vassoler},
year = {2025},
booktitle = {Proccedings of the 18th International Conference on Advanced Computational Engineering and Experimenting},
address = {Naples - Italy, Brasil},
pages = {1--1},
keywords = {compositos, mef, bioengenharia},
}
Conference paper
A study of AE monitoring with MEMS sensors in 3D-printed structures
Ignacio Iturrioz; Leandro Ferreira Friedrich; Vicente Bergamini Puglia; Adryel V. G. Pinto; A. C Fraga; A. G. Girardi; Giuseppe Lacidogna
proceedimg of IIIAE2025 2025
Show BibTeX
@inproceedings{iturrioz2025e,
title = {A Study of AE Monitoring with MEMS Sensors in 3D-Printed Structures},
author = {Ignacio Iturrioz and Leandro Ferreira Friedrich and Vicente Bergamini Puglia and Pinto, Adryel V. G. and A. C Fraga and A. G. Girardi and Giuseppe Lacidogna},
year = {2025},
booktitle = {proceedimg of IIIAE2025},
address = {Nagoya, Japão},
keywords = {mef, vibracoes},
}
Conference paper
A study of the effects of post-design fiber reinforcements in structural response of metallic trusses
Bárbara Thaís Jacques Minosso; Rogério José Marczak
Proceedings of the 27th international congress of mechanical engineering 2025
@inproceedings{minosso2025a,
title = {A study of the effects of post-design fiber reinforcements in structural response of metallic trusses},
author = {Bárbara Thaís Jacques Minosso and Rogério José Marczak},
year = {2025},
booktitle = {Proceedings of the 27th International Congress of Mechanical Engineering},
doi = {10.26678/abcm.cobem2023.cob2023-1831},
issn = {2176-5472},
date = {2024-02-22},
keywords = {mec, mef, compositos},
}
Conference paper
A technique for synthesizing spectrum-compatible artificial ground motions
Daniel Barbosa Mapurunga Matos; Juan Felipe Vallejo Ospina; Letícia Fleck Fadel Miguel
Proceedings of the XLVI ibero-latin american congress on computational methods in engineering 2025
@inproceedings{matos2025a,
title = {A Technique for Synthesizing Spectrum-Compatible Artificial Ground Motions},
author = {Daniel Barbosa Mapurunga Matos and Juan Felipe Vallejo Ospina and Letícia Fleck Fadel Miguel},
year = {2025},
booktitle = {Proceedings of the XLVI Ibero-Latin American Congress on Computational Methods in Engineering},
address = {Vitória, Brasil},
doi = {10.55592/cilamce2025.v5i.14088},
issn = {2675-6269},
abstract = {In seismic engineering, nonlinear dynamic analyses have become vital tools for accurately assessing the safety of critical infrastructure, in which estimating collapse probability and verifying serviceability levels are priorities. However, pseudo-acceleration response spectra prescribed by standards such as Eurocode 8, NSR10 or NBR 15421 lack temporal information, which prevents the adequate representation of seismic load evolution. This limitation hinders the ability to capture phenomena such as stiffness degradation, damage accumulation, or stress redistribution, all of which are fundamental to nonlinear analyses. Consequently, the creation of artificial seismic records stands out as a feasible approach for studies in the time domain. Classical methods such as the Kanai-Tajimi model (KANAI, 1961; TAJIMI, 1960), are widely used due to their simplicity but show poor spectral fidelity when compared to target design spectra. To overcome this challenge, this study introduces a methodology inspired by Clough and Penzien (1995). The proposed methodology facilitates the generation of synthetic accelerograms whose spectral response aligns with high fidelity to the normative pseudo-acceleration spectrum, ensuring their effective application in nonlinear dynamic analyses. An additional application of this methodology is the reduction of real signals to optimize nonlinear structural analysis. It is common in the literature to use trimmed segments of real signals to reduce processing time. However, such trimming can alter the original statistical properties of the signal. The methodology proposed in this study enables the generation of artificial signals that preserve the statistical characteristics of real ones, but with shorter duration, maintaining data integrity for structural analysis. The main objective of this study is to assess the method’s effectiveness in generating artificial records from normative spectra and real signals, verifying both its spectral accuracy and applicability in advanced seismic design and structural assessment contexts. Preliminary results show strong agreement with design spectra and stable frequency content distribution. In conclusion, the proposed method constitutes a precise, robust, and conceptually consistent tool for generating synthetic seismic signals from normative spectra and real signals, fulfilling the spectral and temporal requirements necessary for their use in nonlinear structural response studies.},
keywords = {vibracoes, otimizacao},
}
Article
Acoustic emission time series for structural failure prediction: a study on corso grosseto viaduct girders
Leandro Ferreira Friedrich; G. Lacidogna; Ignacio Iturrioz; F. Tondolo
Experimental Mechanics, v. 65 (9), p. 1413–1426 2025
@article{friedrich2025a,
title = {Acoustic Emission Time Series for Structural Failure Prediction: A Study on Corso Grosseto Viaduct Girders},
author = {Leandro Ferreira Friedrich and G. Lacidogna and Ignacio Iturrioz and F. Tondolo},
year = {2025},
journal = {Experimental Mechanics},
volume = {65},
number = {9},
pages = {1413--1426},
doi = {10.1007/s11340-025-01223-9},
issn = {0014-4851},
eissn = {1741-2765},
date = {2025-09-04},
abstract = {Background The ability to predict structural failures in civil engineering remains limited, particularly in assessing imminent failure conditions through real-time monitoring. This study addresses significant gaps in the identification of failure precursors in prestressed concrete structures. Objective The primary objective of this research is to enhance the prediction of impending failures in bridge girders through advanced analysis of Acoustic Emission (AE) signals. Methods Two innovative approaches are employed: Natural Time (NT) analysis and the Method of Critical Fluctuations-Based (MCF-B) approach. These methodologies are applied to AE data collected from girders subjected to three- and four-point bending tests, specifically those from a decommissioned 50-year-old prestressed concrete bridge in Turin, Italy. Results The analysis reveals that critical regions identified through the convergence of Natural Time (NT) parameters correlate significantly with spikes in acoustic emission activity, indicating impending structural failure. The Method of Critical Fluctuations-Based (MCF-B) approach successfully identifies critical states, yielding consistent results across varying threshold levels, which reinforces its reliability. Conclusions The findings underscore the effectiveness of both Natural Time (NT) and the Method of Critical Fluctuations-Based (MCF-B) approaches in predicting imminent structural failures, providing valuable insights for future structural health monitoring practices and enhancing the safety of aging infrastructure.},
keywords = {mef, vibracoes},
}
Book chapter
Adaptive rendezvous planning algorithm for energy-efficient marine operations
Maicol Laurenza; Gianluca Pepe; Herbert Martins Gomes; Walter Jesus Paucar Casas
Progress in marine science and technology, p. 775–782 2025
@incollection{gomes2025c,
title = {Adaptive Rendezvous Planning Algorithm for Energy-Efficient Marine Operations},
author = {Maicol Laurenza and Gianluca Pepe and Herbert Martins Gomes and Walter Jesus Paucar Casas},
year = {2025},
booktitle = {Progress in Marine Science and Technology},
publisher = {IOS Press},
pages = {775--782},
doi = {10.3233/pmst250092},
issn = {2543-0955},
eissn = {2543-0963},
date = {2025-08-07},
abstract = {In recent years, autonomous surface vehicles (USV/ASV) have found increasingly widespread application in various maritime contexts, thanks to advances in automation and artificial intelligence. However, the limited onboard energy availability still represents an obstacle to their operational autonomy, especially when undertaking long-duration missions or covering vast oceanic areas becomes necessary. To overcome this challenge, the present work proposes a rendezvous architecture in which a mother ship, equipped with a launch and recovery system (LARS), provides energy and logistical support to the autonomous drone. The planning method is based on a global optimization model that employs Particle Swarm Optimization and aims to minimize collective energy consumption, while also taking into account the energy limits and propulsive capabilities of each vehicle, without neglecting the goal of reducing mission times. Additionally, the algorithm integrates an obstacle management system based on the visibility graph, enabling safe and effective solutions even in complex scenarios. Simulation results highlight the ability to deliver near-real-time solutions and to maintain robust performance even in particularly challenging weather conditions characterized by rapid changes.},
keywords = {vibracoes, otimizacao, transdutores},
}
Article
An adaptative fuzzy logic control with road class classifications based on machine learning approaches
Leonardo Roso Colpo; Herbert Martins Gomes
Mechanics Based Design of Structures and Machines, v. 54 (1), p. 2523577 2025
@article{colpo2025a,
title = {An adaptative fuzzy logic control with road class classifications based on machine learning approaches},
author = {Leonardo Roso Colpo and Herbert Martins Gomes},
year = {2025},
journal = {Mechanics Based Design of Structures and Machines},
volume = {54},
number = {1},
pages = {2523577},
doi = {10.1080/15397734.2025.2523577},
issn = {1539-7734},
eissn = {1539-7742},
date = {2025-06-26},
abstract = {This paper presents an innovative approach to vehicle vibration control by integrating adaptive Fuzzy Logic Control (FLC) with machine learning (ML) algorithms for road classification. The main motivation for the research lies in the increasing demand for safer and more efficient vehicle systems that can adapt to various road conditions that vehicles may face during service life. The study uses several Machine Learning techniques, including Decision Trees, Support Vector Machines, k-Nearest Neighbors, and Convolutional Neural Networks, to classify road types based on acceleration signals. The findings indicate that the Decision Tree classifier achieved the best overall performance in recognizing different road classes, particularly at varying velocities, with an F1-score of 0.751. In contrast, the k-NN and CNN methods showed slightly lower performance. The results also demonstrate that the adaptive FLC significantly outperformed traditional fixed-gain FLC in reducing vehicle vibrations across different road profile conditions from ISO 8608:2021. For instance, the adaptive fuzzy controller achieved vibration reductions of 46.36% on high-quality roads, compared to 30.27% with traditional methods. The study concludes that leveraging ML for real-time road classification enhances the adaptability of FLC systems, ultimately improving vehicle ride comfort and performance based on monitoring dynamic environmental conditions.},
keywords = {vibracoes, otimizacao, transdutores},
}
Master's dissertation
Análise avançada de ruído e vibração no powertrain de um veículo comercial de 10 toneladas : um estudo experimental
@mastersthesis{souza2025c,
title = {Análise avançada de ruído e vibração no powertrain de um veículo comercial de 10 toneladas : um estudo experimental},
author = {Tarik Aziz Saded Din de Souza},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
lume = {https://lume.ufrgs.br/handle/10183/294340},
abstract = {Este estudo apresenta uma análise experimental para avaliar o desempenho acústico e vibracional do powertrain de um veículo de 10 toneladas. A pesquisa foi motivada pela ocorrência de estalos durante a ativação do diferencial, indicando possíveis anormalidades nos satélites do conjunto de engrenagens. A metodologia combinou análises experimentais com algum auxílio numérico, utilizando técnicas avançadas como análise de ordens, modal, vibração torcional, espectro, envelope, curtose, fator de crista, distorção e cepstro para investigar o comportamento do sistema e identificar o componente que gera os estalos. Os componentes analisados incluíram motor, eixo cardan e diferencial, com ênfase nos conjuntos de engrenagens e rolamentos. Foi desenvolvida uma célula de carga instrumentando o cardan com extensômetros para medir torque em tempo real e sensores ópticos com fitas zebras para determinar a velocidade de rotação. Foram instalados acelerômetros no eixo cardan, no carrier e microfones no carrier e no housing do eixo traseiro. Os testes experimentais contemplaram quatro condições: veículo suspenso, aceleração e frenagem, esterçamento máximo e rodagem em rodovia. A análise modal identificou a frequência natural do cardan (134,03 Hz), determinando sua rotação crítica em 8.042 RPM. A análise torcional foi realizada por meio de três métodos: acelerômetros lineares, fitas zebras e extensômetros. Apesar de problemas técnicos com os acelerômetros, os outros métodos confirmaram a ausência do fenômeno. As análises de distorção e curtose apresentaram resultados inconsistentes, enquanto o fator de crista indicou valores extremamente elevados, com desvios de até 745,14% do aceitável, provavelmente devido à intensa vibração do motor. A análise de ordens revelou as relações de engrenagens e outros componentes do sistema, destacando a combustão do motor como uma fonte significativa de ruído e vibração. Os espectros de frequência identificaram as frequências de engrenamento dos satélites, coroa e pinhão, evidenciando a alta intensidade dos satélites durante a ativação do diferencial. A análise de cepstro apontou frequências características dos rolamentos e rotação. Concluiu-se que os satélites desempenham um papel relevante na emissão dos estalos, confirmando a hipótese inicial de anormalidades.},
keywords = {vibracoes, otimizacao},
}
Conference paper
Análise da combustão do hidrogênio em motor monocilindrico de pesquisa por ignição por centelha
Giovanni Souza de Andrade
Salão da pós-graduação (1. : 2025 out. 20-24 : UFRGS, porto alegre, RS) 2025
@inproceedings{andrade2025a,
title = {Análise da combustão do hidrogênio em motor monocilindrico de pesquisa por ignição por centelha},
author = {Giovanni Souza de Andrade},
year = {2025},
booktitle = {Salão da Pós-Graduação (1. : 2025 out. 20-24 : UFRGS, Porto Alegre, RS)},
lume = {https://lume.ufrgs.br/handle/10183/309849},
}
Undergraduate thesis
Análise da influência do raio de entalhes em juntas flangeadas metálico-elastoméricas via Método dos Elementos Finitos
Petherson Kauan Aguiar dos Santos
2025
Advisor: Rogério José Marczak · Co-advisor: Felipe Tempel Stumpf
@misc{santos2025d,
title = {Análise da influência do raio de entalhes em juntas flangeadas metálico-elastoméricas via Método dos Elementos Finitos},
author = {Petherson Kauan Aguiar dos Santos},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
howpublished = {Trabalho de Conclusão de Curso},
lume = {https://lume.ufrgs.br/handle/10183/295835},
abstract = {Este trabalho investiga a influência geométrica de entalhes semicirculares no com portamento mecânico de juntas flangeadas metálico-elastoméricas. Utilizando o Método dos Elementos Finitos (MEF), analisou-se sistematicamente o efeito de diferentes raios de entalhe na distribuição de tensões e padrões de deslocamento em componentes flangeados. O estudo considerou configurações com flanges de aço acoplados a um elemento elastomérico inter mediário, submetidos a condições de carregamento representativas de aplicações industriais. Foram implementados procedimentos rigorosos de validação numérica, incluindo testes de convergência de malha e análise de sensibilidade paramétrica. Os resultados obtidos fornecem insights valiosos sobre a relação entre geometria do entalhe e concentração de tensões, com implicações práticas para o projeto de juntas flangeadas. Discutem-se as limitações do modelo adotado e sugerem-se direções para pesquisas futuras, particularmente no que concerne à modelagem não linear do comportamento do elastômero. O trabalho contribui para o entendi mento fundamental do acoplamento metal-elastômero em configurações flangeadas, oferecendo subsídios para otimização geométrica destes componentes.},
keywords = {mef, vibracoes, mec, compositos},
}
Undergraduate thesis
Análise da otimização topológica tridimensional multimaterial em problema térmico utilizando algoritmo de fase alternativa
@misc{kologeski2024a,
title = {Análise da otimização topológica tridimensional multimaterial em problema térmico utilizando algoritmo de fase alternativa},
author = {Ian Gabriel dos Santos Kologeski},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
howpublished = {Trabalho de Conclusão de Curso},
lume = {https://lume.ufrgs.br/handle/10183/285308},
abstract = {A otimização topológica em componentes que conduzem calor oferece várias vantagens em projeto e análise de engenharia. Ela permite o projeto de dispositivos com distribuição otimizada de material, levando à criação de componentes com melhor desempenho térmico. Ao redistribuir o material obtêm-se projetos com melhores caminhos de condutividade térmica e dissipação de calor mais eficiente, melhorando, em última análise, o desempenho e a confiabilidade dos sistemas de troca térmica. Este trabalho analisa a otimização topológica de multimateriais em um cubo com condições de contorno de gradiente de temperatura prescrito nas faces e geração volumétrica de calor constante dentro do domínio, usando um algoritmo, validado, baseado no método numérico SIMP (Solid Isotropic Material with Penalization) com fase alternativa e filtro de função limiar heaviside. O problema térmico visa otimizar topologicamente a estrutura com o mínimo de conformidade térmica. A técnica apresentada pode efetivamente produzir o arranjo estrutural ideal com alta eficiência de dissipação de calor, dado um volume prescrito de cada um dos materiais condutores. Os resultados mostram que os materiais com maior condutividade tendem a ser centralizados e próximos às faces, e apresentam formatos geométricos suaves e circulares},
keywords = {vibracoes, otimizacao, transdutores},
}
Master's dissertation
Análise da sensibilidade de parâmetros geométricos em um disco de freio ventilado visando a redução do efeito de coning
Pablo Schettert Bagatini
2025
Advisor: Daniel Milbrath de Leon
Show BibTeX
@mastersthesis{bagatini2025b,
title = {Análise da Sensibilidade de Parâmetros Geométricos em um Disco de Freio Ventilado Visando a Redução do Efeito de Coning},
author = {Pablo Schettert Bagatini},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
keywords = {otimizacao, vibracoes, mef},
}
Undergraduate thesis
Análise de integridade aplicável a equipamentos estáticos e tubulações industriais
@misc{aquino2025a,
title = {Análise de integridade aplicável a equipamentos estáticos e tubulações industriais},
author = {Yuri Netto Aquino},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
howpublished = {Trabalho de Conclusão de Curso},
lume = {https://lume.ufrgs.br/handle/10183/295833},
abstract = {Equipamentos e tubulações industriais em aço são amplamente empregados em diversos setores, como o petroquímico, o de mineração e o de geração de energia. De modo geral, devido à sua alta resistência mecânica, soldabilidade, conformabilidade e comportamento sob pressão interna e variações térmicas, o aço é um material de aplicação indispensável em ambientes industriais complexos e de elevada exigência técnica. Neste contexto, o presente trabalho analisa três metodologias para avaliação da integridade estrutural de equipamentos e tubulações fabricados em aço, considerando soldas e processos siderúrgicos: (i) o método tradicional da norma American Petroleum Institute (API 579), que estabelece diretrizes para avaliar a integridade e segurança de equipamentos em operação, é subdividido, para fins de comparação, em dois casos neste trabalho: um considerando apenas as tensões primárias, e outro considerando as tensões primárias e residuais. (ii) a metodologia R6, originalmente desenvolvida pelo Central Electricity Generating Board (CEGB); e (iii) o método proposto por Feddersen (1971), publicado pela American Society for Testing and Materials (ASTM), que apresenta uma abordagem simplificada para a obtenção do fator de intensidade de tensão e reúne estudos relacionados à tolerância ao dano em estruturas aeronáuticas. Neste trabalho, também são aplicados os conceitos de confiabilidade no contexto da norma API 579. A abordagem adotada neste estudo inclui simplificações e adequações geométricas que permitem aplicar os métodos a um mesmo cenário de tubulações industriais. A comparação entre as metodologias possibilitou avaliar o desempenho da proposta alternativa de Feddersen; evidenciou a importância de considerar os efeitos das tensões residuais e descontinuidades na avaliação da criticidade de problemas físicos, e aprofundar a compreensão da abordagem API 579 na identificação de soluções mais eficientes para otimização da manutenção e aumento da confiabilidade operacional.},
keywords = {mef, vibracoes},
}
Undergraduate thesis
Análise de integridade de um equipamento pressurizado com defeitos planares empregando normas de adequação ao uso
@misc{maciel2024a,
title = {Análise de integridade de um equipamento pressurizado com defeitos planares empregando normas de adequação ao uso},
author = {Igor Selhane Maciel},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
howpublished = {Trabalho de Conclusão de Curso},
lume = {https://lume.ufrgs.br/handle/10183/285250},
abstract = {A avaliação da integridade em estruturas pressurizadas relacionadas a presença de defeitos planares é de importância estratégica em países industrializados. Metodologias de análise consolidadas permitem tomar decisões de engenharia para determinar se um equipamento pode continuar operando com segurança e ainda podem definir a frequência de inspeções e/ou ações mitigadoras que permitam facilitar a gestão da operação destes tipos de equipamentos. Estas metodologias tentam de forma simplificada avaliar a interação entre a propagação instável de fissuras e o colapso seguindo três metodologias: O método R6, na sua forma clássica e duas utilizando a norma API579. No presente trabalho é analisado um vaso de pressão típico, de corpo cilíndrico e com uma fissura longitudinal. Um estudo paramétrico também foi realizado, a fim de investigar como o aumento da pressão ou o crescimento das dimensões do defeito interagem com a evolução da criticidade do defeito. Aspectos mais específicos, como a maneira que o defeito cresce e a influência da tensão residual, de importância crucial quando o defeito está situado próximo a uma solda, também são estudados. Os resultados obtidos e a discussão a partir do problema estudado, bem como do estudo paramétrico, ilustram as possibilidades de utilizar estas metodologias},
keywords = {mef, vibracoes},
}
Undergraduate thesis
Análise de ruído na operação de instrução em aeronaves de pequeno porte
Gregory Petersen Kruel
2025
Advisor: Letícia Fleck Fadel Miguel
Show BibTeX
@misc{kruel2025a,
title = {Análise de Ruído na Operação de Instrução em Aeronaves de Pequeno Porte},
author = {Gregory Petersen Kruel},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
howpublished = {Trabalho de Conclusão de Curso},
keywords = {vibracoes, otimizacao},
}
Conference paper
Análise de sistemas de suspensão de veículos através de redes neurais informadas pela Física
Guilherme Rode Prieb
Salão de iniciação científica (37. : 2025 out. 20-24 : UFRGS, porto alegre, RS) 2025
@inproceedings{prieb2025a,
title = {Análise de sistemas de suspensão de veículos através de redes neurais informadas pela Física},
author = {Guilherme Rode Prieb},
year = {2025},
booktitle = {Salão de Iniciação Científica (37. : 2025 out. 20-24 : UFRGS, Porto Alegre, RS)},
lume = {https://lume.ufrgs.br/handle/10183/305276},
keywords = {vibracoes, otimizacao, transdutores},
}
Conference paper
Análise de sistemas de suspensão de veículos através Redes Neurais Informadas por Física (PINNs)
Guilherme Rode Prieb; Herbert Martins Gomes
Anais do salão de iniciação cientfrica UFRGS 2025, p. 1–1 2025
Show BibTeX
@inproceedings{gomes2025e,
title = {Análise de sistemas de suspensão de veículos através Redes Neurais Informadas por Física (PINNs)},
author = {Guilherme Rode Prieb and Herbert Martins Gomes},
year = {2025},
booktitle = {Anais do Salão de Iniciação Cientfrica UFRGS 2025},
address = {Porto Alegre, RS, Brasil, Brasil},
pages = {1--1},
keywords = {vibracoes, otimizacao, transdutores},
}
Undergraduate thesis
Análise estrutural de mola helicoidal automotiva fabricada com material compósito forjado
@misc{hofstadler2025a,
title = {Análise estrutural de mola helicoidal automotiva fabricada com material compósito forjado},
author = {Franz Hofstadler},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
howpublished = {Trabalho de Conclusão de Curso},
lume = {https://lume.ufrgs.br/handle/10183/295661},
abstract = {A constante evolução da indústria automotiva tem gerado uma demanda crescente por componentes mecânicos mais eficientes, capazes de atender às necessidades específicas dos veículos. No contexto do sistema de suspensão automotiva, o objetivo é desenvolver molas helicoidais cada vez mais leves e eficazes, que suportem as diversas condições a que os automóveis são submetidos, incluindo esforços dinâmicos e estáticos, variações de temperatura e resistência à corrosão. Esse cenário tem impulsionado a busca por materiais alternativos ao aço utilizado nas molas automotivas convencionais. Diante deste contexto, este trabalho se propõe a analisar alternativas à mola helicoidal automotiva, substituindo o aço de molas, por um material composto de fibra de carbono. Para tanto, entendeu-se como importante realizar o cálculo de fadiga e de parâmetros de mola e uma posterior modelagem computacional e análise pelo método dos elementos finitos para a mola convencional em aço e para a mesma em material composto de fibra de carbono. Coube ainda, como fundamentação, a determinação das propriedades do material compósito para ser utilizada no cálculo do componente, assim como de uma exploração teórica sobre a fabricação das molas de fibra de carbono através do processo forjamento de material compósito. A partir de uma análise comparativa dos resultados obtidos para o modelo de mola convencional em aço e para o modelo de mola em compósito de fibra de carbono são apresentadas conclusões finais sobre a possibilidade técnica de substituição da mola helicoidal.},
keywords = {vibracoes, otimizacao, transdutores},
}
Undergraduate thesis
Análise estrutural de molas de material compósito submetidas a esforço de torção nas configurações monolítica e sanduíche
@misc{rissato2025a,
title = {Análise estrutural de molas de material compósito submetidas a esforço de torção nas configurações monolítica e sanduíche},
author = {Renan Rissato},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
howpublished = {Trabalho de Conclusão de Curso},
lume = {https://lume.ufrgs.br/handle/10183/295815},
abstract = {Este trabalho avalia, por meio de análises estruturais comparativas no software Ansys Workbench 2024 R1 (versão estudantil), o potencial de aplicação de molas compósitas do tipo sanduíche (compostas por laminados externos de fibra de vidro/epóxi e núcleo leve), em comparação aos modelos monolíticos, inteiramente compostos por material laminar. O objetivo é verificar a capacidade dessas estruturas em reduzir tensões de cisalhamento e minimizar problemas com delaminações, especialmente sob carregamentos torcionais. Também são avaliadas a rigidez, a distribuição de tensões na direção das fibras e a massa total dos modelos. Para o núcleo, são analisadas três espumas estruturais com a mesma massa específica (PVC, PET e SAN), além de cinco variações de espessura entre laminado e núcleo. Os resultados indicam que os modelos sanduíche são eficazes na redistribuição dos esforços de cisalhamento por meio do núcleo, especialmente sob torção pura. Sob carregamentos combinados, essa capacidade se reduz. As diferentes proporções de espessura permitem adaptar o desempenho estrutural conforme a aplicação desejada. Um exemplo é observado no modelo com laminados de seis milímetros de espessura (30 camadas) e 48 milímetros de núcleo, que apresenta a maior absorção de cisalhamento e a menor massa, mas com maiores tensões e deslocamentos. Dessa forma, conclui-se que a configuração sanduíche representa uma alternativa promissora aos modelos monolíticos, principalmente sob carregamentos torcionais.},
keywords = {otimizacao, vibracoes, mef},
}
Undergraduate thesis
Análise estrutural do suporte de um vaso de pressão vertical
@misc{puglia2025c,
title = {Análise estrutural do suporte de um vaso de pressão vertical},
author = {Gabriel Costa Puglia},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
howpublished = {Trabalho de Conclusão de Curso},
lume = {https://lume.ufrgs.br/handle/10183/295686},
abstract = {Vasos de pressão são equipamentos estáticos utilizados em indústrias químicas, de óleo e gás etc, tendo aplicações em diversos processos. Para eles, os elementos de suporte são de extrema importância, uma vez que garantem o adequado funcionamento do equipamento perante cargas sofridas na operação. Neste contexto, este trabalho analisa estruturalmente os suportes de um vaso de pressão frente a diferentes cenários de operação. Estes cenários serão determinados perante as seguintes ações: carga em teste hidrostático e operação, ação do vento para condições normais, P50 ou tempestades, avaliação do colapso do suporte considerando um elemento unifilar metálico, e a criticidade de um defeito na base do suporte, investigando o cenário da propagação instável deste e sua propagação subcrítica devido a cargas oscilantes. Para os cálculos foi utilizada a norma de dimensionamento de estruturas unifilares metálicas (NBR8800), a da ação de vento (NBR6123) e a que avalia a criticidade de defeitos planares (API579), também foi utilizado o método dos Elementos Finitos e métodos analíticos. A comparação entre os resultados vistos é realizada explorando as particularidades desta tipologia estrutural. Os resultados indicam o correto dimensionamento do suporte perante a flambagem e propagação de trinca, mas sendo necessário a aplicação de um quebra –vento.},
keywords = {mef, vibracoes},
}
Conference paper
Análise paramétrica de disco de freio ventilado com foco na redução da falha de coning
Pablo Schettert Bagatini
Salão da pós-graduação (1. : 2025 out. 20-24 : UFRGS, porto alegre, RS) 2025
@inproceedings{bagatini2025c,
title = {Análise paramétrica de disco de freio ventilado com foco na redução da falha de coning},
author = {Pablo Schettert Bagatini},
year = {2025},
booktitle = {Salão da Pós-Graduação (1. : 2025 out. 20-24 : UFRGS, Porto Alegre, RS)},
lume = {https://lume.ufrgs.br/handle/10183/309636},
keywords = {otimizacao, vibracoes, mef},
}
Undergraduate thesis
Análise sísmica de estruturas nucleares a partir de espectros de frequência e introdução de não linearidades no modelo
Kadyne Fioravante Radaelli
2025
Advisor: Letícia Fleck Fadel Miguel
Show BibTeX
@misc{radaelli2025a,
title = {Análise Sísmica de Estruturas Nucleares a partir de Espectros de Frequência e Introdução de Não Linearidades no Modelo},
author = {Kadyne Fioravante Radaelli},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
howpublished = {Trabalho de Conclusão de Curso},
keywords = {vibracoes, otimizacao},
}
Article
Analysis of energy conversion using piezoelectric materials and structures with acoustic black holes
Meng He; Tatiane Weimann; Alexandre Molter; Jairo Valões de Alencar Ramalho; Daniel Milbrath de Leon
Finite Elements in Analysis and Design, v. 252, p. 104454 2025
@article{weimann2025a,
title = {Analysis of energy conversion using piezoelectric materials and structures with acoustic black holes},
author = {Meng He and Tatiane Weimann and Alexandre Molter and Jairo Valões de Alencar Ramalho and Daniel Milbrath de Leon},
year = {2025},
journal = {Finite Elements in Analysis and Design},
volume = {252},
pages = {104454},
doi = {10.1016/j.finel.2025.104454},
issn = {0168-874X},
date = {2025-12},
keywords = {otimizacao, vibracoes, mef},
}
Article
Analysis of the dynamic response of a model of an oyster farming structure
Paulo Fiuza Lamarão; Waldir Terra Pinto; Walter Jesus Paucar Casas
Ships and Offshore Structures, v. 21 (7), p. 1064–1076 2025
@article{lamarao2025a,
title = {Analysis of the dynamic response of a model of an oyster farming structure},
author = {Paulo Fiuza Lamarão and Waldir Terra Pinto and Walter Jesus Paucar Casas},
year = {2025},
journal = {Ships and Offshore Structures},
volume = {21},
number = {7},
pages = {1064--1076},
doi = {10.1080/17445302.2025.2453202},
issn = {1744-5302},
date = {2025-01-22},
abstract = {Encouraged by the increase in oyster consumption, allied to the growth in the use of coastal marine areas, the development of oyster farming in open sea areas involves the joint efforts of different areas of knowledge. This interdisciplinarity is needed, given that the vibrations and hydrodynamics of structures can affect the distribution of food, the filtering capacity and hence the growth of these organisms. In this context, the article discusses the dynamic response of a hanging oyster farming structure subjected to the influence of different waves. The quantification of the relative velocity between the body and the fluid indicates that the oyster shells probably close part of the time. Lastly, by increasing the length of the cable supporting the cultivation line, an attenuation of approximately 60% can be achieved in the horizontal movement as a result of the distance from the system's natural frequency to that of excitation.},
keywords = {vibracoes, otimizacao},
}
Conference paper
Analytical method for mitigating stress concentrations in a centrally perforated composite leaf spring for heavy-duty vehicle suspensions
Guilherme Binkowski Perroni; Daniel Milbrath de Leon
Proceedings of the 28th international congress of mechanical engineering 2025
@inproceedings{perroni2025a,
title = {Analytical Method for Mitigating Stress Concentrations in a Centrally Perforated Composite Leaf Spring for Heavy-duty Vehicle Suspensions},
author = {Guilherme Binkowski Perroni and Daniel Milbrath de Leon},
year = {2025},
booktitle = {Proceedings of the 28th International Congress of Mechanical Engineering},
address = {Brasil},
doi = {10.26678/abcm.cobem2025.cob2025-0890},
issn = {2176-5472},
keywords = {otimizacao, vibracoes, mef},
}
Undergraduate thesis
Aplicação de elementos finitos de mais alta ordem para supressão de filtros de vizinhança em otimização topológica
Victor Corassa Farias
2025
Advisor: Daniel Milbrath de Leon
Show BibTeX
@misc{farias2025a,
title = {Aplicação de Elementos Finitos de mais Alta Ordem para Supressão de Filtros de Vizinhança em Otimização Topológica},
author = {Victor Corassa Farias},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
howpublished = {Trabalho de Conclusão de Curso},
keywords = {otimizacao, vibracoes, mef},
}
Undergraduate thesis
Aplicação de engenharia reversa e digitalização 3D no desenvolvimento de projeto mecânico na indústria
@misc{trindade2024a,
title = {Aplicação de engenharia reversa e digitalização 3D no desenvolvimento de projeto mecânico na indústria},
author = {Marcos Vinícius Fernandes Trindade},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
howpublished = {Trabalho de Conclusão de Curso},
lume = {https://lume.ufrgs.br/handle/10183/285291},
abstract = {A indústria automotiva tem se beneficiado significativamente da engenharia reversa e da digitalização tridimensional (3D) para otimizar o desenvolvimento de projetos em CAD (Desenho Assistido por Computador). Este trabalho apresenta o estudo de caso que foca na análise de duas peças específicas: o carro do transportador e o cilindro. O problema abordado é a necessidade de otimizar o desenvolvimento e a reposição dessas peças, que não estão disponíveis comercialmente com um tempo de entrega viável. Como método, foram utilizadas técnicas de digitalização 3D para gerar modelos CAD, permitindo a análise dimensional e a avaliação de materiais equivalentes. Os resultados revelaram diferenças dimensionais nas peças, com desvios maiores em áreas de geometria complexa, mas sem comprometer a funcionalidade, porém sugere-se uma investigação mais detalhada. O estudo de materiais indicou que o carro do transportador pode ser fabricado em aços de baixo carbono e o cilindro em ferro fundido. A conclusão aponta que a digitalização 3D, aliada à engenharia reversa, é eficaz para otimizar o desenvolvimento de projetos mecânicos, visando reduzir o tempo de inatividade das máquinas e garantindo a compatibilidade dos materiais. Como próximos passos, sugerem-se fortemente simulações estruturais e estudos de desempenho de materiais substitutos},
keywords = {vibracoes, otimizacao, transdutores},
}
Conference paper
Application of design of experiments and dimensonal analysis for multi-material cantilever beam characterization
Eduardo Dambros Telli; Daniel Milbrath de Leon; Ignacio Iturrioz; Gustavo Prates Mezzomo
Proceedings of the 27th international congress of mechanical engineering 2025
@inproceedings{telli2025b,
title = {Application of design of experiments and dimensonal analysis for multi-material cantilever beam characterization},
author = {Eduardo Dambros Telli and Daniel Milbrath de Leon and Ignacio Iturrioz and Gustavo Prates Mezzomo},
year = {2025},
booktitle = {Proceedings of the 27th International Congress of Mechanical Engineering},
doi = {10.26678/abcm.cobem2023.cob2023-1149},
issn = {2176-5472},
date = {2024-02-22},
keywords = {otimizacao, vibracoes, mef},
}
Conference paper
Assessment of mesh sensitivity of hotspot methods applied to offshore structures
Gabriel Costa Rodrigues; Carlos Eduardo de Souza; Bruno Klahr; Daniel Milbrath de Leon
Ibero-latin american congress on computational methods in engineering (46. : 2025. : Vitória) 2025
@inproceedings{rodrigues2026a,
title = {Assessment of mesh sensitivity of hotspot methods applied to offshore structures},
author = {Gabriel Costa Rodrigues and Carlos Eduardo de Souza and Bruno Klahr and Daniel Milbrath de Leon},
year = {2025},
booktitle = {Ibero-Latin American Congress on Computational Methods in Engineering (46. : 2025. : Vitória)},
address = {Vitória, Brasil},
doi = {10.55592/cilamce2025.v5i.14186},
issn = {2675-6269},
lume = {https://lume.ufrgs.br/handle/10183/311382},
abstract = {To execute fatigue analysis of offshore structures, it is important to adequately determine the stresses field, especially on welds. Welded regions tend to have significant stress concentration. To deal with this problem, some international standards suggest the hot spot stress (HSS) method to estimate the stresses near welds, including guidelines for finite element analysis. Two strategies of HSS calculations are considered here: surface-extrapolated stress and through-thickness linearized stress. Recommendations exist for elements sizes of mesh depending on element type, geometry and method for HSS calculation. In this work, the calculations are applied initially to a simple flat model with different meshes, with varying element sizes and proportions between the three dimensions. Next, the strategies are applied to more complex structure, representing a bell mouth used in offshore oil platforms. Being mostly a cylindrical geometry, meshing is controlled mainly by the number of elements in thickness as well as element size in circumferential and axial direction. Different loads were applied on each case to verify mesh sensitivity relation with load type. Results indicate different levels of effect on HSS results for each direction of mesh refinement. The relation of sensitivity of the mesh with the load applied is shown and discussed.},
keywords = {otimizacao, mef, vibracoes},
}
Conference paper
Assessment of suspension damper malfunctions on the dynamic response of a semi-trailer truck multibody system
Lucas Miranda Visnievski; Walter Jesus Paucar Casas
Anais do VBE 2025 2025
Show BibTeX
@inproceedings{visnievski2025a,
title = {Assessment of suspension damper malfunctions on the dynamic response of a semi-trailer truck multibody system},
author = {Lucas Miranda Visnievski and Walter Jesus Paucar Casas},
year = {2025},
booktitle = {Anais do VBE 2025},
address = {Porto, Portugal, Brasil},
keywords = {vibracoes, otimizacao},
}
Article
Assessment of the effects of UV-A exposure on the mechanical strength of offshore mooring multifilaments
Daniel Magalhães da Cruz; Felipe Tempel Stumpf; Jakson Manfredini Vassoler; Carlos Eduardo Marcos Guilherme
@article{cruz2025b,
title = {Assessment of the effects of UV-A exposure on the mechanical strength of offshore mooring multifilaments},
author = {Daniel Magalhães da Cruz and Felipe Tempel Stumpf and Jakson Manfredini Vassoler and Carlos Eduardo Marcos Guilherme},
year = {2025},
journal = {Acta Polytechnica},
volume = {64},
number = {6},
pages = {487--500},
doi = {10.14311/ap.2024.64.0487},
eissn = {1805-2363},
date = {2025-01-07},
abstract = {The offshore industry faces significant challenges in the dynamic energy and maritime domain, necessitating robust engineering solutions for mooring systems. This study investigates the impact of ultraviolet radiation A (UV-A) on the mechanical strength of high-strength multifilaments, crucial for offshore mooring. Five fibre types: Aramid, High-modulus polyethylene (HMPE), Liquid crystal polymers (LCP), Polyamide and Polyester, are exposed to UV-A for up to 28 days. Initial mechanical characterisation provides baseline data, while subsequent tests reveal varying degrees of degradation. Polyamide and polyester exhibit superior stability, while Aramid and HMPE show restrained degradation. LCP experiences substantial degradation. Mathematical modelling reveals distinct degradation patterns, emphasising the need for comprehensive understanding in ensuring the safety and efficiency of offshore operations. There are indications that degradation by ultraviolet exposure for Aramid, HMPE, polyamide, and polyester fibres, restricts the constitutive behaviour in terms of strength and extension, but without changing the shape of the curve. These findings provide valuable insights for the offshore industry and guidance future research and development efforts.},
keywords = {mef, vibracoes, compositos, bioengenharia},
}
Undergraduate thesis
Avaliação do algoritmo Circle-Inspired Optimization Algorithm (CIOA) na otimização estrutural e problemas diversos
@misc{verza2025a,
title = {Avaliação do algoritmo Circle-Inspired Optimization Algorithm (CIOA) na otimização estrutural e problemas diversos},
author = {Víctor Machry Verza},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
howpublished = {Trabalho de Conclusão de Curso},
lume = {https://lume.ufrgs.br/handle/10183/285367},
abstract = {A otimização estrutural é um ramo da engenharia que vem se desenvolvendo nos últimos anos. A crescente competitividade do mercado fomenta a redução dos custos atrelado ao aumento da qualidade e da resistência das estruturas. Portanto, é de suma importância que algoritmos de otimização sejam capazes de gerar resultados confiáveis com um tempo computacional relativamente baixo. Ante o exposto, no presente trabalho o algoritmo Circle Inspired Optimization Algorithm (CIOA) é avaliado em diferentes contextos e comparado com outros algoritmos já consagrados no mercado. Os códigos computacionais são programados utilizando o software MATLAB. A avaliação é feita através de simulação numérica de estruturas e funções benchmarks com diferentes restrições para posterior comparação dos resultados obtidos. Ao final, um caso do mundo real é resolvido pelo CIOA para demonstrar sua aplicação no contexto da engenharia estrutural. Como resultado, o novo algoritmo proposto demonstra uma boa performance na resolução dos problemas de otimização com um tempo computacional equivalente aos demais algoritmos, apresentando como principal diferencial o reduzido número de parâmetros de entrada e a facilidade de uso nos mais diferentes contextos},
keywords = {vibracoes, otimizacao},
}
Conference paper
Avaliação do conforto vibracional em condutor do modelo multicorpo de um veículo de carga
Vitor Siqueira Figueiredo
Salão de iniciação científica (37. : 2025 out. 20-24 : UFRGS, porto alegre, RS) 2025
@inproceedings{figueiredo2025a,
title = {Avaliação do conforto vibracional em condutor do modelo multicorpo de um veículo de carga},
author = {Vitor Siqueira Figueiredo},
year = {2025},
booktitle = {Salão de Iniciação Científica (37. : 2025 out. 20-24 : UFRGS, Porto Alegre, RS)},
lume = {https://lume.ufrgs.br/handle/10183/305099},
keywords = {vibracoes, otimizacao},
}
Conference paper
Biomechanical modeling of gluteus maximus contribution to pedal torque
André Viegas Wentz; Daniel Milbrath de Leon
Ibero-latin american congress on computational methods in engineering (46. : 2025. : Vitória) 2025
@inproceedings{wentz2026a,
title = {Biomechanical Modeling of Gluteus Maximus Contribution to Pedal Torque},
author = {André Viegas Wentz and Daniel Milbrath de Leon},
year = {2025},
booktitle = {Ibero-Latin American Congress on Computational Methods in Engineering (46. : 2025. : Vitória)},
address = {Vitória, Brasil},
doi = {10.55592/cilamce2025.v5i.14119},
issn = {2675-6269},
lume = {https://lume.ufrgs.br/handle/10183/311423},
abstract = {This work presents a biomechanical model of a cyclist in the sagittal plane, simulating the motion of the leg and pedal based on a four-bar linkage mechanism. Inverse kinematics is used to determine the positions of the lower limb segments throughout the pedaling cycle, and the force calculations are performed using inverse dynamics. A system of linear equations is formulated to compute joint reaction forces and the crank torque from joint moments. The Gluteus Maximus muscle is modeled using real anatomical data such as physiological cross-sectional area (PCSA), specific muscle tension, muscle activation, and the behavior of the muscle’s moment arm over the femoral head. Muscle force is estimated using a Hill-type model, where muscle elongation is considered in order to represent the nonlinear behavior of the muscle–tendon unit. The resulting analysis allows the evaluation of the torque generated by the Gluteus Maximus during the pedaling cycle, enabling the identification of optimal activation positions and the instants where the activation will produce isometric contractions that do not contribute to the generation of crank torque. This analysis is especially important when designing the bicycle frame and its drivetrain to ensure efficient load transfer throughout the pedaling motion.},
keywords = {otimizacao, vibracoes, mef},
}
Article
Bridge health monitoring using deep learning based on sinusoidal gratings
Daniele Kauctz Monteiro; Juliano Pardelinhas Cardoso; Gabriel Moreira Beretta; Letícia Fleck Fadel Miguel; Anderson Rocha Tavares
Structural Health Monitoring, v. Online, p. 14759217251389099 2025
@article{monteiro2025a,
title = {Bridge health monitoring using deep learning based on sinusoidal gratings},
author = {Daniele Kauctz Monteiro and Juliano Pardelinhas Cardoso and Gabriel Moreira Beretta and Letícia Fleck Fadel Miguel and Anderson Rocha Tavares},
year = {2025},
journal = {Structural Health Monitoring},
volume = {Online},
pages = {14759217251389099},
doi = {10.1177/14759217251389099},
issn = {1475-9217},
eissn = {1741-3168},
date = {2025-11-05},
abstract = {This article proposes a novel vibration-based bridge health monitoring approach using convolutional neural networks (CNNs). Unlike other works that rely on precise feature extraction and suffer from environmental variability, the proposed methodology utilizes acceleration signals transformed into images of sinusoidal gratings via fast Fourier transform as an alternative solution. These images capture the natural frequencies of the bridge, which are sensitive indicators of damage. Three structures are analyzed to verify this novel approach: the Old ADA Bridge, the Z24 Bridge, and the Hell Bridge Test Arena. We employed ResNet50, DenseNet, and InceptionV3 CNN architectures to classify the structural condition. The models of the Old ADA Bridge, the Z24 Bridge, and the Hell Bridge Test Arena achieved F1 scores of 94.15, 98.39, and 99.97%, respectively, surpassing the performance of baseline techniques using acceleration signals as input by up to 13.46%. Furthermore, it was observed that the variability of the modal damage-sensitive features and the type of vibration of the system were not determining factors in the models’ performance. These results indicate the effectiveness of the proposed methodology in the early identification of potential structural problems on real-world bridges.},
keywords = {vibracoes, otimizacao},
}
Conference paper
Constitutive simulation of synthetic fibers for offshore mooring under cyclic loading: Hysteresis stabilization and stiffness evolution
Daniel Magalhães da Cruz; Larissa Basei Zangalli; Aleones José da Cruz Júnior; Ana Lúcia Nazareth da Silva; Ivan Napoleão Bastos; Carlos Eduardo Marcos Guilherme; Fernanda Mazuco Clain; Jakson Manfredini Vassoler; Felipe Tempel Stumpf
Proceedings of the XLVI ibero-latin-american congress on computational methods in engineering, p. 1–1 2025
@inproceedings{cruz2025m,
title = {Constitutive Simulation of Synthetic Fibers for Offshore Mooring Under Cyclic Loading: Hysteresis Stabilization and Stiffness Evolution},
author = {Daniel Magalhães da Cruz and Larissa Basei Zangalli and Aleones José da Cruz Júnior and Ana Lúcia Nazareth da Silva and Ivan Napoleão Bastos and Carlos Eduardo Marcos Guilherme and Fernanda Mazuco Clain and Jakson Manfredini Vassoler and Felipe Tempel Stumpf},
year = {2025},
booktitle = {Proceedings of the XLVI Ibero-Latin-American Congress on Computational Methods in Engineering},
address = {Vitória, Brasil},
pages = {1--1},
doi = {10.55592/cilamce2025.v5i.13986},
issn = {2675-6269},
abstract = {The mechanical performance of synthetic fibers used in offshore mooring systems is strongly influenced by their nonlinear response under cyclic loading. This study presents a constitutive simulation framework aimed at capturing the complex cyclic behavior of different synthetic fibers, particularly focusing on hysteresis stabilization and stiffness evolution during repeated loading cycles. The proposed model is grounded in hyperelastic theory, adopting a modified Yeoh strain energy density function to represent the fiber material response. The simulations are driven by a parametric optimization strategy based on continuum mechanics principles, involving iterative fitting between stress and strain tensors. This approach enables the calibration of model parameters to reflect the progressive mechanical behavior observed in experimental cyclic tests. By incorporating multiple loading cycles into the analysis, the model captures the gradual stabilization of mechanical hysteresis and tracks changes in normalized stiffness throughout the loading history. The results highlight the capability of the modified energy-based model to reproduce key features of fiber cyclic behavior, including load-unload asymmetry, residual strain accumulation, and nonlinear stiffness degradation. Additionally, the study demonstrates the sensitivity of the constitutive parameters to the number of cycles required for hysteresis stabilization, providing insights into the fatigue-like mechanical adaptation of fiber structures. This framework offers a robust foundation for integrating synthetic fiber behavior into larger-scale offshore system simulations, contributing to more accurate mooring design under realistic loading conditions. The proposed method can be adapted for different synthetic fiber types and extended to multi-scale modeling approaches, strengthening the predictive capability of offshore engineering tools.},
keywords = {mef, vibracoes, compositos, bioengenharia},
}
Technical output
Consultoria ad hoc - pareceres emitidos para o cnpq sobre apoio a projetos de pesquisa - CHAMADA CNPQ - OEAD - ÁUSTRIA
Letícia Fleck Fadel Miguel
2025
Show BibTeX
@misc{miguel2025d,
title = {Consultoria Ad Hoc - Pareceres Emitidos para o CNPq sobre Apoio a Projetos de Pesquisa - CHAMADA CNPQ - OEAD - ÁUSTRIA},
author = {Letícia Fleck Fadel Miguel},
year = {2025},
howpublished = {Produção técnica},
keywords = {vibracoes, otimizacao},
}
Technical output
Consultoria ad hoc - pareceres emitidos para o cnpq sobre chamada pública cnpq n° 18/2024 - bolsas de produtividade em pesquisa, PQ 2025
Letícia Fleck Fadel Miguel
2025
Show BibTeX
@misc{miguel2025c,
title = {Consultoria Ad Hoc - Pareceres Emitidos para o CNPq sobre Chamada Pública CNPq n° 18/2024 - Bolsas de Produtividade em Pesquisa, PQ 2025},
author = {Letícia Fleck Fadel Miguel},
year = {2025},
howpublished = {Produção técnica},
keywords = {vibracoes, otimizacao},
}
Technical output
Consultoria ad hoc - pareceres emitidos para o cnpq sobre chamada pública cnpq n° 49/2024 - pesquisador visitante especial - PVE 2024
Letícia Fleck Fadel Miguel
2025
Show BibTeX
@misc{miguel2025g,
title = {Consultoria Ad Hoc - Pareceres Emitidos para o CNPq sobre Chamada Pública CNPq n° 49/2024 - Pesquisador Visitante Especial - PVE 2024},
author = {Letícia Fleck Fadel Miguel},
year = {2025},
howpublished = {Produção técnica},
keywords = {vibracoes, otimizacao},
}
Technical output
Consultoria ad hoc - pareceres emitidos para o cnpq sobre chamada pública cnpq n° 49/2024 - pós-doutorado júnior - PDJ 2024
Letícia Fleck Fadel Miguel
2025
Show BibTeX
@misc{miguel2025f,
title = {Consultoria Ad Hoc - Pareceres Emitidos para o CNPq sobre Chamada Pública CNPq n° 49/2024 - Pós-Doutorado Júnior - PDJ 2024},
author = {Letícia Fleck Fadel Miguel},
year = {2025},
howpublished = {Produção técnica},
keywords = {vibracoes, otimizacao},
}
Technical output
Consultoria ad hoc - pareceres emitidos para o cnpq sobre chamada pública cnpq/MCTI n° 44/2024 - universal 2024
Letícia Fleck Fadel Miguel
2025
Show BibTeX
@misc{miguel2025e,
title = {Consultoria Ad Hoc - Pareceres Emitidos para o CNPq sobre Chamada Pública CNPq/MCTI n° 44/2024 - Universal 2024},
author = {Letícia Fleck Fadel Miguel},
year = {2025},
howpublished = {Produção técnica},
keywords = {vibracoes, otimizacao},
}
Article
Dataset for machine learning training of road class recognition
Leonardo Roso Colpo; Herbert Martins Gomes
Mechanics Based Design of Structures and Machines, v. 1 (1), p. 1–10 2025
@article{colpo2025f,
title = {Dataset for Machine Learning Training of Road Class Recognition},
author = {Leonardo Roso Colpo and Herbert Martins Gomes},
year = {2025},
journal = {Mechanics Based Design of Structures and Machines},
volume = {1},
number = {1},
pages = {1--10},
doi = {10.17632/25v3pdk9jj},
issn = {1539-7734},
keywords = {vibracoes, otimizacao, transdutores},
}
Technical output
Desenvolvimento de critério de análise de suportes de riser - fadiga e avaliação de defeitos. Relatório parcial 3: Descrição das atividades técnicas realizadas em 2025
Rogério José Marczak; Jakson Manfredini Vassoler; Felipe Tempel Stumpf; Daniel Milbrath de Leon; Carlos Eduardo de Souza; Bruno Klahr; Cristiano João Brizzi Ubessi; Cristian Zarichta; Fábio Goedel; André Alaniz Cesário; Gabriel Costa Rodrigues; Gabriel Rodrigo Hilgert
2025
Show BibTeX
@misc{marczak2025b,
title = {Desenvolvimento de Critério de Análise de Suportes de Riser - Fadiga e Avaliação de Defeitos. Relatório Parcial 3: Descrição das Atividades Técnicas Realizadas em 2025},
author = {Rogério José Marczak and Jakson Manfredini Vassoler and Felipe Tempel Stumpf and Daniel Milbrath de Leon and Carlos Eduardo de Souza and Bruno Klahr and Cristiano João Brizzi Ubessi and Cristian Zarichta and Fábio Goedel and André Alaniz Cesário and Gabriel Costa Rodrigues and Gabriel Rodrigo Hilgert},
year = {2025},
howpublished = {Produção técnica},
keywords = {otimizacao, mef, vibracoes, compositos, bioengenharia, mec},
}
Technical output
Desenvolvimento de critério de análise de suportes de riser - fadiga e avaliação de defeitos. Relatório técnico 14: Mapa de tensões da BSN900-travamento parcial de dogs
Rogério José Marczak; Jakson Manfredini Vassoler; Felipe Tempel Stumpf; Daniel Milbrath de Leon; Carlos Eduardo de Souza; Bruno Klahr; Cristian Zarichta; Fábio Goedel; André Alaniz Cesário; Gabriel Costa Rodrigues; Igor Felipe Teixeira Tunes; Gabriel Rodrigo Hilgert
2025
Show BibTeX
@misc{marczak2025c,
title = {Desenvolvimento de Critério de Análise de Suportes de Riser - Fadiga e Avaliação de Defeitos. Relatório técnico 14: Mapa de tensões da BSN900-travamento parcial de DOGs},
author = {Rogério José Marczak and Jakson Manfredini Vassoler and Felipe Tempel Stumpf and Daniel Milbrath de Leon and Carlos Eduardo de Souza and Bruno Klahr and Cristian Zarichta and Fábio Goedel and André Alaniz Cesário and Gabriel Costa Rodrigues and Igor Felipe Teixeira Tunes and Gabriel Rodrigo Hilgert},
year = {2025},
howpublished = {Produção técnica},
keywords = {otimizacao, mef, vibracoes, compositos, bioengenharia, mec},
}
Technical output
Desenvolvimento de critério de análise de suportes de riser - fadiga e avaliação de defeitos. Relatório técnico 15: Avaliação de defeitos na BSN300-30
Rogério José Marczak; Jakson Manfredini Vassoler; Felipe Tempel Stumpf; Daniel Milbrath de Leon; Carlos Eduardo de Souza; Bruno Klahr; Cristian Zarichta; André Alaniz Cesário; Fábio Goedel
2025
Show BibTeX
@misc{marczak2025d,
title = {Desenvolvimento de Critério de Análise de Suportes de Riser - Fadiga e Avaliação de Defeitos. Relatório técnico 15: Avaliação de Defeitos na BSN300-30},
author = {Rogério José Marczak and Jakson Manfredini Vassoler and Felipe Tempel Stumpf and Daniel Milbrath de Leon and Carlos Eduardo de Souza and Bruno Klahr and Cristian Zarichta and André Alaniz Cesário and Fábio Goedel},
year = {2025},
howpublished = {Produção técnica},
keywords = {otimizacao, mef, vibracoes, compositos, bioengenharia, mec},
}
Technical output
Desenvolvimento de critério de análise de suportes de riser - fadiga e avaliação de defeitos. Relatório técnico 16: Avaliação de defeitos na BSN300-22
Rogério José Marczak; Jakson Manfredini Vassoler; Felipe Tempel Stumpf; Daniel Milbrath de Leon; Carlos Eduardo de Souza; Bruno Klahr; Cristian Zarichta; Fábio Goedel; André Alaniz Cesário; Gabriel Costa Rodrigues; Igor Felipe Teixeira Tunes; Gabriel Rodrigo Hilgert
2025
Show BibTeX
@misc{marczak2025e,
title = {Desenvolvimento de Critério de Análise de Suportes de Riser - Fadiga e Avaliação de Defeitos. Relatório técnico 16: Avaliação de Defeitos na BSN300-22},
author = {Rogério José Marczak and Jakson Manfredini Vassoler and Felipe Tempel Stumpf and Daniel Milbrath de Leon and Carlos Eduardo de Souza and Bruno Klahr and Cristian Zarichta and Fábio Goedel and André Alaniz Cesário and Gabriel Costa Rodrigues and Igor Felipe Teixeira Tunes and Gabriel Rodrigo Hilgert},
year = {2025},
howpublished = {Produção técnica},
keywords = {otimizacao, mef, vibracoes, compositos, bioengenharia, mec},
}
Technical output
Desenvolvimento de critério de análise de suportes de riser - fadiga e avaliação de defeitos. Relatório técnico 17: Avaliação de defeitos na BSN300-18
Rogério José Marczak; Jakson Manfredini Vassoler; Felipe Tempel Stumpf; Daniel Milbrath de Leon; Carlos Eduardo de Souza; Bruno Klahr; Cristian Zarichta; Fábio Goedel; André Alaniz Cesário; Gabriel Costa Rodrigues; Igor Felipe Teixeira Tunes
2025
Show BibTeX
@misc{marczak2025f,
title = {Desenvolvimento de Critério de Análise de Suportes de Riser - Fadiga e Avaliação de Defeitos. Relatório técnico 17: Avaliação de Defeitos na BSN300-18},
author = {Rogério José Marczak and Jakson Manfredini Vassoler and Felipe Tempel Stumpf and Daniel Milbrath de Leon and Carlos Eduardo de Souza and Bruno Klahr and Cristian Zarichta and Fábio Goedel and André Alaniz Cesário and Gabriel Costa Rodrigues and Igor Felipe Teixeira Tunes},
year = {2025},
howpublished = {Produção técnica},
keywords = {otimizacao, mef, vibracoes, compositos, bioengenharia, mec},
}
Technical output
Desenvolvimento de critério de análise de suportes de riser - fadiga e avaliação de defeitos. Relatório técnico 18: Configurações da modelagem da TSUDL ? Rígida e flexível
Rogério José Marczak; Jakson Manfredini Vassoler; Felipe Tempel Stumpf; Daniel Milbrath de Leon; Carlos Eduardo de Souza; Thiago Fardin; Flora Vieira e Silva; Gabriel Gaynett Leturiondo; Gustavo Luiz Spielmann
2025
Show BibTeX
@misc{marczak2025g,
title = {Desenvolvimento de Critério de Análise de Suportes de Riser - Fadiga e Avaliação de Defeitos. Relatório técnico 18: Configurações da modelagem da TSUDL ? Rígida e Flexível},
author = {Rogério José Marczak and Jakson Manfredini Vassoler and Felipe Tempel Stumpf and Daniel Milbrath de Leon and Carlos Eduardo de Souza and Thiago Fardin and Flora Vieira e Silva and Gabriel Gaynett Leturiondo and Gustavo Luiz Spielmann},
year = {2025},
howpublished = {Produção técnica},
keywords = {otimizacao, mef, vibracoes, compositos, bioengenharia, mec},
}
Technical output
Desenvolvimento de critério de análise de suportes de riser - fadiga e avaliação de defeitos. Relatório técnico 19: Determinação de fator de concentração de tensão do furo roscado inferior da fixação da cunha da TSUDL
Rogério José Marczak; Jakson Manfredini Vassoler; Felipe Tempel Stumpf; Daniel Milbrath de Leon; Carlos Eduardo de Souza; Gustavo Luiz Spielmann
2025
Show BibTeX
@misc{marczak2025h,
title = {Desenvolvimento de Critério de Análise de Suportes de Riser - Fadiga e Avaliação de Defeitos. Relatório técnico 19: Determinação de Fator de Concentração de Tensão do Furo Roscado Inferior da Fixação da Cunha da TSUDL},
author = {Rogério José Marczak and Jakson Manfredini Vassoler and Felipe Tempel Stumpf and Daniel Milbrath de Leon and Carlos Eduardo de Souza and Gustavo Luiz Spielmann},
year = {2025},
howpublished = {Produção técnica},
keywords = {otimizacao, mef, vibracoes, compositos, bioengenharia, mec},
}
Technical output
Desenvolvimento de critério de análise de suportes de riser - fadiga e avaliação de defeitos. Relatório técnico 20: Mapa de tensões da TSUDL rígida
Rogério José Marczak; Jakson Manfredini Vassoler; Felipe Tempel Stumpf; Daniel Milbrath de Leon; Carlos Eduardo de Souza; Bruno Klahr; Cristiano João Brizzi Ubessi; Cristian Zarichta; Fábio Goedel; André Alaniz Cesário; Gabriel Costa Rodrigues; Igor Felipe Teixeira Tunes; Gabriel Rodrigo Hilgert
2025
Show BibTeX
@misc{marczak2025i,
title = {Desenvolvimento de Critério de Análise de Suportes de Riser - Fadiga e Avaliação de Defeitos. Relatório técnico 20: Mapa de tensões da TSUDL Rígida},
author = {Rogério José Marczak and Jakson Manfredini Vassoler and Felipe Tempel Stumpf and Daniel Milbrath de Leon and Carlos Eduardo de Souza and Bruno Klahr and Cristiano João Brizzi Ubessi and Cristian Zarichta and Fábio Goedel and André Alaniz Cesário and Gabriel Costa Rodrigues and Igor Felipe Teixeira Tunes and Gabriel Rodrigo Hilgert},
year = {2025},
howpublished = {Produção técnica},
keywords = {otimizacao, mef, vibracoes, compositos, bioengenharia, mec},
}
Undergraduate thesis
Desenvolvimento de critérios de avaliação de carga limite de flambagem em carregadores de navios móveis
Bento Gambin
2025
Advisor: Carlos Eduardo de Souza
Show BibTeX
@misc{gambin2025a,
title = {Desenvolvimento de critérios de avaliação de carga limite de flambagem em carregadores de navios móveis},
author = {Bento Gambin},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
howpublished = {Trabalho de Conclusão de Curso},
keywords = {otimizacao, mef},
}
Conference paper
Desenvolvimento e análise de um modelo mecânico computacional utilizando elementos finitos para a comparação entre diferentes implantes na técnica cirúrgica de osteotomia femoral distal
Davi Josué da Silva Júnior
Salão de iniciação científica (37. : 2025 out. 20-24 : UFRGS, porto alegre, RS) 2025
@inproceedings{junior2025a,
title = {Desenvolvimento e análise de um modelo mecânico computacional utilizando elementos finitos para a comparação entre diferentes implantes na técnica cirúrgica de osteotomia femoral distal},
author = {Davi Josué da Silva Júnior},
year = {2025},
booktitle = {Salão de Iniciação Científica (37. : 2025 out. 20-24 : UFRGS, Porto Alegre, RS)},
lume = {https://lume.ufrgs.br/handle/10183/304289},
keywords = {compositos, mef, bioengenharia},
}
Article
Design of transmission line towers by metaheuristic algorithms: A comparative study
Marcos Wilson Ogata; Herbert Martins Gomes; Felipe Schaedler de Almeida
Journal of Constructional Steel Research, v. 228, p. 109426 2025
@article{ogata2025a,
title = {Design of transmission line towers by metaheuristic algorithms: A comparative study},
author = {Marcos Wilson Ogata and Herbert Martins Gomes and Felipe Schaedler de Almeida},
year = {2025},
journal = {Journal of Constructional Steel Research},
volume = {228},
pages = {109426},
doi = {10.1016/j.jcsr.2025.109426},
issn = {0143-974X},
date = {2025-05},
keywords = {vibracoes, otimizacao, transdutores},
}
Undergraduate thesis
Discussão sobre projeto de uma estrutura mecânica de proteção contra impacto balístico.
Gabriel Simioni
2025
Advisor: Ignacio Iturrioz
Show BibTeX
@misc{simioni2025a,
title = {Discussão Sobre Projeto de uma Estrutura Mecânica de Proteção Contra Impacto Balístico.},
author = {Gabriel Simioni},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
howpublished = {Trabalho de Conclusão de Curso},
keywords = {mef, vibracoes},
}
Undergraduate thesis
Discussão sobre técnicas de análise de um vaso de pressão de corpo cilíndrico de parede espessa
@misc{araujo2025a,
title = {Discussão sobre técnicas de análise de um vaso de pressão de corpo cilíndrico de parede espessa},
author = {Araújo, Hugo Matheus Vaz de},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
howpublished = {Trabalho de Conclusão de Curso},
lume = {https://lume.ufrgs.br/handle/10183/285265},
abstract = {O dimensionamento mecânico de vasos de pressão segue pautas bem definidas, devido à grande quantidade de acidentes ocorridos desde o século XIX envolvendo equipamentos pres surizados. As normas de projeto para vasos de pressão são um exemplo de sucesso sobre co mo as normativas contribuem para a gestão da segurança em equipamentos pressurizados. Neste trabalho, é estudado um vaso de pressão de parede espessa, com o cálculo das tensões realizado utilizando expressões da resistência dos materiais. São discutidas e as equações es tabelecidas pela Norma ASME VIII, Divisão 1, comumente empregada no dimensionamento de vasos de pressão. Além disso, as tensões são computadas utilizando um modelo de elemen tos finitos. Na comparação, são observadas diversas características tanto do comportamento do vaso quanto das considerações feitas pela norma para determinar seu dimensionamento. Por fim, foi considerado um defeito planar no vaso, e sua avaliação foi realizada seguindo o Método R6},
keywords = {mef, vibracoes},
}
Undergraduate thesis
Dispositivo de identificação no rompimento em correntes de compensação para elevadores
Geovane de Azevedo Soares
2025
Advisor: Herbert Martins Gomes
Show BibTeX
@misc{soares2025a,
title = {Dispositivo de identificação no rompimento em correntes de compensação para elevadores},
author = {Geovane de Azevedo Soares},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
howpublished = {Trabalho de Conclusão de Curso},
keywords = {vibracoes, otimizacao, transdutores},
}
Article
Dynamic cycle simulation in offshore mooring fibers: Modified mathematical models and dependence on invariants of continuum mechanics
Daniel Magalhães da Cruz; Ivan Napoleão Bastos; Ana Lúcia Nazareth Da Silva; Jakson Manfredini Vassoler; Felipe Tempel Stumpf; Aleones José da Cruz Júnior; Taline Carvalho Martins; Fernanda Mazuco Clain; Carlos Eduardo Marcos Guilherme
VETOR - Revista de Ciências Exatas e Engenharias, v. 35 (1), p. e18256 2025
@article{cruz2025l,
title = {Dynamic Cycle Simulation in Offshore Mooring Fibers: Modified Mathematical Models and Dependence on Invariants of Continuum Mechanics},
author = {Daniel Magalhães da Cruz and Ivan Napoleão Bastos and Ana Lúcia Nazareth Da Silva and Jakson Manfredini Vassoler and Felipe Tempel Stumpf and Aleones José da Cruz Júnior and Taline Carvalho Martins and Fernanda Mazuco Clain and Carlos Eduardo Marcos Guilherme},
year = {2025},
journal = {VETOR - Revista de Ciências Exatas e Engenharias},
volume = {35},
number = {1},
pages = {e18256},
doi = {10.63595/vetor.v35i1.18256},
issn = {0102-7352},
eissn = {2358-3452},
date = {2025-08-01},
abstract = {This paper presents a study on the stress-strain simulation of offshore mooring fibers using the Modified Yeoh model. It incorporates the mathematical descriptions (linear, quadratic, cubic, and exponential), also examining the dependence on the strain invariants (I1 and I2), thus aiming to improve the accuracy of the numerical description of the constitutive behavior of the fibers. The research methodology includes computational simulations validated by experimental data, focusing on the mathematical construction based on the Modified Yeoh model for representing the constitutive behavior in mechanical hysteresis (loading-unloading), addressing two fibers: high modulus polyethylene (HMPE) and polyester (PET). The simulation results demonstrate the models' ability to describe the stress-strain behavior, but it is clear that a description solely through I2 is not sufficient for the convergence of the simulation with the experimental data. For the mathematical models, the linear term dependent on I1 (principal strains) is the most important for the good fitting of experimental data. The smallest error concerning the simulations is obtained for a model with a complete mathematical description and dependence on both invariants, presenting an average error of 0.52% for HMPE and 1.77% for PET. This work provides a framework for simulating and understanding the mechanical responses of mooring fibers in mechanical hysteresis, highlighting the relevance of the mathematical model and invariant dependence coupled with numerical simulation.},
keywords = {mef, vibracoes, compositos, bioengenharia},
}
Presentation
Early-age damage assessment of cement-based materials:A multiscale perspective
Rodrigo Rossi
2025
Show BibTeX
@misc{rossi2025b,
title = {Early-age damage assessment of cement-based materials:A multiscale perspective},
author = {Rodrigo Rossi},
year = {2025},
howpublished = {Apresentação de trabalho: The 6th International Forum of Nfees on the Latest Development of Resilient City},
keywords = {mef, ensaios},
}
Article
Earthquake precursors based on rock acoustic emission and deep learning
@article{friedrich2025d,
title = {Earthquake Precursors Based on Rock Acoustic Emission and Deep Learning},
author = {Zihan Jiang and Zhiwen Zhu and Giuseppe Lacidogna and Leandro Ferreira Friedrich and Ignacio Iturrioz},
year = {2025},
journal = {Sci},
volume = {7},
number = {3},
pages = {103},
doi = {10.3390/sci7030103},
eissn = {2413-4155},
date = {2025-08-01},
abstract = {China is one of the countries severely affected by earthquakes, making precise and timely identification of earthquake precursors essential for reducing casualties and property damage. A novel method is proposed that combines a rock acoustic emission (AE) detection technique with deep learning methods to facilitate real-time monitoring and advance earthquake precursor detection. The AE equipment and seismometers were installed in a granite tunnel 150 m deep in the mountains of eastern Guangdong, China, allowing for the collection of experimental data on the correlation between rock AE and seismic activity. The deep learning model uses features from rock AE time series, including AE events, rate, frequency, and amplitude, as inputs, and estimates the likelihood of seismic events as the output. Precursor features are extracted to create the AE and seismic dataset, and three deep learning models are trained using neural networks, with validation and testing. The results show that after 1000 training cycles, the deep learning model achieves an accuracy of 98.7% on the validation set. On the test set, it reaches a recognition accuracy of 97.6%, with a recall rate of 99.6% and an F1 score of 0.975. Additionally, it successfully identified the two biggest seismic events during the monitoring period, confirming its effectiveness in practical applications. Compared to traditional analysis methods, the deep learning model can automatically process and analyse recorded massive AE data, enabling real-time monitoring of seismic events and timely earthquake warning in the future. This study serves as a valuable reference for earthquake disaster prevention and intelligent early warning.},
keywords = {mef, vibracoes},
}
Undergraduate thesis
Efeito do diâmetro da fibra de vidro com recobrimento (sizing) nas propriedades micro e macro mecânicas de compósitos
Patrick Lima da Silva
2025
Advisor: Daniel Milbrath de Leon
Show BibTeX
@misc{silva2025c,
title = {Efeito do Diâmetro da Fibra de Vidro com Recobrimento (Sizing) nas Propriedades Micro e Macro Mecânicas de Compósitos},
author = {Patrick Lima da Silva},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
howpublished = {Trabalho de Conclusão de Curso},
keywords = {otimizacao, vibracoes, mef},
}
Conference paper
Effects of seawater hydrolysis on the mechanical rupture properties of aramid fibers
Daniel Magalhães da Cruz; Ignacio Melito; Tales Luiz Popiolek Júnior; Jakson Manfredini Vassoler; Felipe Tempel Stumpf; Fernanda Clain; Carlos Eduardo Marcos Guilherme
Anais do encontro nacional de modelagem computacional e encontro de ciência e tecnologia de materiais 2025
@inproceedings{cruz2026g,
title = {Effects of Seawater Hydrolysis on the Mechanical Rupture Properties of Aramid Fibers},
author = {Daniel Magalhães da Cruz and Ignacio Melito and Tales Luiz Popiolek Júnior and Jakson Manfredini Vassoler and Felipe Tempel Stumpf and Fernanda Clain and Carlos Eduardo Marcos Guilherme},
year = {2025},
booktitle = {Anais do Encontro Nacional de Modelagem Computacional e Encontro de Ciência e Tecnologia de Materiais},
address = {Universidade Estadual de Monte, Brasil},
doi = {10.29327/1453544.1206164},
keywords = {mef, vibracoes, compositos, bioengenharia},
}
Conference paper
Efficient confidence bound estimation for a dynamic composite plate with epistemic uncertainties using non-intrusive imprecise stochastic simulation
Ewerton Grotti; Matteo Broggi; Herbert Martins Gomes; Michael Beer
Proceedings of the 6th international conference on uncertainty quantification in computational sciences and engineering (UNCECOMP), p. 72–83 2025
@inproceedings{grotti2025a,
title = {Efficient Confidence Bound Estimation for a Dynamic Composite Plate with Epistemic Uncertainties Using Non-intrusive Imprecise Stochastic Simulation},
author = {Ewerton Grotti and Matteo Broggi and Herbert Martins Gomes and Michael Beer},
year = {2025},
booktitle = {Proceedings of the 6th International Conference on Uncertainty Quantification in Computational Sciences and Engineering (UNCECOMP)},
address = {Rhodes, Greece, Grécia},
pages = {72--83},
doi = {10.7712/120225.12341.21417},
issn = {2623-3339},
abstract = {EFFICIENT CONFIDENCE BOUND ESTIMATION FOR A DYNAMIC COMPOSITE PLATE WITH EPISTEMIC UNCERTAINTIES USING NON-INTRUSIVE IMPRECISE STOCHASTIC SIMULATION - 6th International Conference on Uncertainty Quantification in Computational Sciences and Engineering - 15-18 June 2025, Rhodes Island, Greece},
keywords = {vibracoes, otimizacao, transdutores},
}
Conference paper
Ejaya metaheuristic algorithm for structural optimization
Giliane de Lima Oliveira; Herbert Martins Gomes
Proceedings of the 28th international congress on mechanical engineering, COBEM 2025, p. 1–9 2025
@inproceedings{gomes2025f,
title = {Ejaya Metaheuristic Algorithm for Structural Optimization},
author = {Giliane de Lima Oliveira and Herbert Martins Gomes},
year = {2025},
booktitle = {Proceedings of the 28th International Congress on Mechanical Engineering, COBEM 2025},
address = {Curitiba, PR, Brasil},
pages = {1--9},
doi = {10.26678/abcm.cobem2025.cob2025-2378},
issn = {2176-5472},
keywords = {vibracoes, otimizacao, transdutores},
}
Master's dissertation
Estabilidade e resistência de cantoneiras de aço sob compressão excêntrica com restrições rotacionais oblíquas
@mastersthesis{pessutto2025a,
title = {Estabilidade e resistência de cantoneiras de aço sob compressão excêntrica com restrições rotacionais oblíquas},
author = {Ângelo Simonetto Pessutto},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
lume = {https://lume.ufrgs.br/handle/10183/299707},
abstract = {Cantoneiras simples de aço conectadas através de uma das abas são amplamente utilizadas em estruturas treliçadas devido ao baixo peso e à facilidade de montagem. Contudo, a aparente simplicidade da seção transversal contrasta com a complexidade do comportamento mecânico decorrente quando esses elementos são submetidos à compressão. Nessa configuração, o momento fletor oriundo da excentricidade do carregamento é parcialmente equilibrado pela restrição rotacional oferecida pela ligação em uma das abas, que atua em um plano oblíquo aos eixos principais de inércia da seção transversal. Este trabalho investiga a interação entre excentricidade e restrição rotacional oblíqua a partir de duas abordagens principais: (i) através das forças críticas de instabilidade global coerentes com as condições de contorno; e (ii) através de capacidades resistentes obtidas numericamente. A partir da teoria de vigas de Euler-Bernoulli, é formulada a energia potencial total e as equações diferenciais governantes que regem o problema de instabilidade global por flexo-torção de barras prismáticas submetidas à compressão e momento fletor uniforme. Uma solução analítica aproximada é obtida através do método de Rayleigh-Ritz, considerando a presença de molas rotacionais elásticas oblíquas aos eixos principais, além de restrição elástica ao empenamento. As forças críticas resultantes da solução analítica aproximada são comparadas com resultados de outras metodologias disponíveis na literatura, além de análises numéricas com elementos finitos, apresentando boa concordância. Em paralelo, um modelo numérico não linear em elementos finitos de casca é desenvolvido e validado, a fim de fornecer capacidades resistentes de cantoneiras sob compressão excêntrica e com restrições rotacionais elásticas paralelas às abas. Um estudo paramétrico é conduzido com o objetivo de investigar a interação entre excentricidade, restrição rotacional e esbeltez das abas, bem como uma avaliação inicial acerca da aplicabilidade das forças críticas de instabilidade global para o dimensionamento desses elementos. Os resultados indicam que as capacidades resistentes são altamente sensí- veis às condições de contorno e que o uso de forças críticas de instabilidade global, coerentes com as condições de contorno, abre um leque de novas possibilidades para o desenvolvimento de procedimentos de dimensionamento racionais, em contraste com o tradicional método dos comprimentos equivalentes.},
keywords = {vibracoes, otimizacao, transdutores},
}
Article
Estudo da elevação do nível de água induzida por ciclones tropicais com o uso das equações de águas rasas
Marcos Wilson Ogata; Herbert Martins Gomes; Alexandre Luis Braun; Renato Vaz Linn
Revista Mundi Engenharia Tecnologia e Gestão, v. 10 (4), p. 1–14 2025
@article{gomes2025d,
title = {Estudo da Elevação do Nível de Água Induzida Por Ciclones Tropicais com o Uso das Equações de Águas Rasas},
author = {Marcos Wilson Ogata and Herbert Martins Gomes and Alexandre Luis Braun and Renato Vaz Linn},
year = {2025},
journal = {Revista Mundi Engenharia Tecnologia e Gestão},
volume = {10},
number = {4},
pages = {1--14},
doi = {10.21575/25254782rmetg2025vol10n42466},
issn = {2525-4782},
date = {2025-12-15},
abstract = {A modelagem da interação entre tempestades como ciclones tropicais sobre oceanos é muito relevante no campo da meteorologia, pois permite a previsão de riscos e mitigação de danos que esses eventos extremos podem causar nas zonas costeiras. O presente trabalho tem por objetivo estudar a elevação de água gerada pelo surgimento de ciclones tropicais no mar, usando para isso o Método das Diferenças Finitas na solução das Equações de Águas Rasas. O vento gerado pelo ciclone foi simulado através de um modelo analítico que leva em consideração parâmetros meteorológicos e sua interação sobre a dinâmica do oceano, incorporada como tensões tangenciais aplicadas na superfície livre. Foram feitas simulações em dois domínios: um hipotético de batimetria constante e outro que simula de maneira simplificada uma costa marítima. Como resultado, foi possível determinar que os fatores mais impactantes na elevação são o raio onde ocorre a velocidade máxima do ciclone e a diferença de pressão entre o centro da tempestade e sua periferia, resultando em elevações da ordem de 5.00 metros nos casos mais severos. Além disto, a velocidade de translação gerou pouco impacto na elevação, diferente do ângulo de incidência do vento, onde ângulos menores produziram elevações maiores na costa marítima.},
keywords = {vibracoes, otimizacao, transdutores},
}
Conference paper
Estudo da elevação no nível de águas induzidas por ciclones tropicais com o uso das equações de águas rasas
Marcos Wilson Ogata; Renato Vaz Linn; Herbert Martins Gomes; Alexandre Luis Braun
Proceedings of XII encontro regional de matemática aplicada e computacional do rio grande do sul, p. 1–10 2025
Show BibTeX
@inproceedings{ogata2025c,
title = {Estudo da elevação no nível de águas induzidas por ciclones tropicais com o uso das equações de águas rasas},
author = {Marcos Wilson Ogata and Renato Vaz Linn and Herbert Martins Gomes and Alexandre Luis Braun},
year = {2025},
booktitle = {Proceedings of XII Encontro Regional de Matemática Aplicada e Computacional do Rio Grande do Sul},
address = {Porto Alegre, Brasil},
pages = {1--10},
keywords = {vibracoes, otimizacao, transdutores},
}
Conference paper
Estudo de materiais compósitos com reforços naturais para aplicações estruturais e energéticas
Pietra de Castilhos Lagranha
Salão de iniciação científica (37. : 2025 out. 20-24 : UFRGS, porto alegre, RS) 2025
@inproceedings{lagranha2025a,
title = {Estudo de materiais compósitos com reforços naturais para aplicações estruturais e energéticas},
author = {Pietra de Castilhos Lagranha},
year = {2025},
booktitle = {Salão de Iniciação Científica (37. : 2025 out. 20-24 : UFRGS, Porto Alegre, RS)},
lume = {https://lume.ufrgs.br/handle/10183/304112},
keywords = {mec, mef, compositos},
}
Master's dissertation
Estudo do posicionamento ótimo de sensores para identificação modal de treliças
@mastersthesis{matsushita2025b,
title = {Estudo do posicionamento ótimo de sensores para identificação modal de treliças},
author = {Kristian Yuiti Matsushita},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
lume = {https://lume.ufrgs.br/handle/10183/291694},
abstract = {Este trabalho investiga o posicionamento ótimo de sensores para a identificação modal de treliças planas e espaciais, com foco na análise da precisão e eficiência dos métodos de posicionamento, como Ponto de Deslocamento do Nó (NODP), Participação de Forma Modal (MSSP), Valor Próprio de Energia (EVP), Energia de Deformação Modal (MSE), Energia Cinética Modal (MKE), Resíduos de Ponto de Condução (DPR), Independência Efetiva (EFI), e Independência Efetiva com Resíduos de Ponto de Condução (EFI_DPR), avaliando como cada um impacta na precisão da identificação modal. Além disso, o trabalho investiga técnicas de expansão modal, incluindo o método Guyan, Sistema Reduzido Aprimorado (IRS) e Processo de Expansão por Redução Equivalente de Sistema (SEREP), que são aplicadas para extrapolar os modos de vibração não medidos, ampliando a cobertura das medições. A eficácia dessas técnicas de expansão é avaliada com base em dois critérios principais: o Modal Assurance Criterion (MAC) e o Coordinate Modal Assurance Criterion (COMAC), que medem, respectivamente, a correlação global e local entre os modos originais e os modos expandidos. Uma parte essencial do estudo envolve a aplicação de meta-heurísticas, que são técnicas de otimização inspiradas em processos naturais e sociais, para encontrar a melhor configuração para o posicionamento dos sensores. Algoritmos como Circle-Inspired Optimization Algorithm (CIOA), Algoritmo Genético (GA), Recozimento Simulado (SA) e Otimização por Enxame de Partículas (PSO) são utilizados para resolver o problema de otimização do posicionamento dos sensores de forma eficiente. O CIOA, em particular, mostrou ser altamente eficaz, proporcionando uma distribuição ótima de sensores em termos de cobertura e precisão modal. Os resultados demonstraram que o método EFI é o mais adequado para o posicionamento de sensores devido à sua capacidade de cobrir amplamente a estrutura e permitir a reconstrução modal dos modos de vibração em pontos não medidos. Em termos de técnicas de expansão modal, o SEREP se destacou pela sua precisão, embora seja mais complexo computacionalmente.},
keywords = {vibracoes, otimizacao},
}
PhD thesis
Estudo do processo que leva ao colapso sistemas estruturais complexos
Boris Nahuel Rojo Tanzi
2025
Advisor: Ignacio Iturrioz
Show BibTeX
@phdthesis{tanzi2025c,
title = {Estudo do Processo Que Leva Ao Colapso Sistemas Estruturais Complexos},
author = {Boris Nahuel Rojo Tanzi},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
keywords = {mef, vibracoes},
}
Undergraduate thesis
Estudo e avaliação de características sonoras em guitarras elétricas através de análise espectrográfica
Rafael Kereski Nör
2025
Advisor: Letícia Fleck Fadel Miguel
Show BibTeX
@misc{nor2025a,
title = {Estudo e Avaliação de Características Sonoras em Guitarras Elétricas através de Análise Espectrográfica},
author = {Rafael Kereski Nör},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
howpublished = {Trabalho de Conclusão de Curso},
keywords = {vibracoes, otimizacao},
}
Conference paper
Evaluating structural failure in subsea equipment: a comparative study of API 17g’s 2
Gabriel Gaynett Leturiondo; Felipe Tempel Stumpf; Rogério José Marczak
Proceedings of the joint XLVI ibero-latin-american congress on computational methods in engineering 2025
@inproceedings{stumpf2026a,
title = {Evaluating Structural Failure in Subsea Equipment: A Comparative Study of API 17G’s 2% Strain Criterion and Strain Energy Methods},
author = {Gabriel Gaynett Leturiondo and Felipe Tempel Stumpf and Rogério José Marczak},
year = {2025},
booktitle = {Proceedings of the joint XLVI Ibero-Latin-American Congress on Computational Methods in Engineering},
address = {Vitória, Brasil},
doi = {10.55592/cilamce2025.v5i.14271},
issn = {2675-6269},
abstract = {One of the most commonly used criterion to determine the structural failure of subsea equipment is found in API standard 17G, according to which the collapse takes place if, for any individual component or part, the average equivalent plastic strain in the through section path reaches 2% in the deformed configuration. This is known as "the 2 % strain method". In the present work we investigate alternative methodologies to determine the structural failure of an equipment using approaches based on strain energy. We conduct a series of numerical simulations of structures with prior damaged geometries and determine their structural capacity based on the 2% strain method of API 17G. Those results are used as input for posterior analyses in which the strain energy around the damage is measured (numerically) so we can correlate the ultimate load and the energy absorbed in the vicinity of the damaged area. The results are used for successfully predicting the failure load of different geometries with different damaged areas and a critical discussion is carried out concerning the conservativeness of the API 17G criterion.},
keywords = {mef, vibracoes, mec, compositos},
}
Conference paper
Evaluation of shape optimization for passenger transport vehicles subject to the regulatory rollover conditions according to CONTRAN 629/16 (ECE R66.02)
Felipe Spengler; Daniel Milbrath de Leon
Proceedings of the 28th international congress of mechanical engineering 2025
@inproceedings{spengler2025a,
title = {Evaluation of Shape Optimization for Passenger Transport Vehicles Subject to the Regulatory Rollover Conditions According to CONTRAN 629/16 (ECE R66.02)},
author = {Felipe Spengler and Daniel Milbrath de Leon},
year = {2025},
booktitle = {Proceedings of the 28th International Congress of Mechanical Engineering},
address = {Brasil},
doi = {10.26678/abcm.cobem2025.cob2025-0080},
issn = {2176-5472},
keywords = {otimizacao, vibracoes, mef},
}
Conference paper
Evaluation of two geometric parameters on the thermal and structural performance of a brake disc
Pablo Schettert Bagatini; Fabiane Kleemann Grave; Silvano Zortea Junior; Daniel Milbrath de Leon
Proceedings of the 28th international congress of mechanical engineering 2025
@inproceedings{bagatini2025a,
title = {Evaluation of two geometric parameters on the thermal and structural performance of a brake disc},
author = {Pablo Schettert Bagatini and Fabiane Kleemann Grave and Silvano Zortea Junior and Daniel Milbrath de Leon},
year = {2025},
booktitle = {Proceedings of the 28th International Congress of Mechanical Engineering},
address = {Brasil},
doi = {10.26678/abcm.cobem2025.cob2025-1452},
issn = {2176-5472},
keywords = {otimizacao, vibracoes, mef},
}
Conference paper
Evolução da confiabilidade de peneiras rollerscreen em operações de minério de ferro: Estudo de caso nas usinas de carajás
Jose Cleber Rodrigues da Silva; Antonio Francisco da Silva Souza; Rogério José Marczak
Anais do VI SBGA, p. 1 2025
Show BibTeX
@inproceedings{marczak2025k,
title = {Evolução da Confiabilidade de Peneiras Rollerscreen em Operações de Minério de Ferro: Estudo de caso nas Usinas de Carajás},
author = {Jose Cleber Rodrigues da Silva and Antonio Francisco da Silva Souza and Rogério José Marczak},
year = {2025},
booktitle = {Anais do VI SBGA},
address = {Paragominas, Brasil},
pages = {1},
keywords = {mec, mef, compositos},
}
Article
Evolutionary topology optimization applied to a system with fluid-structure interaction via maximization of the natural frequency
Vitor Souza Viana Silva; Gustavo Comerlato Rodrigues; Ederval de Souza Lisboa; Fernanda Bichet Link; Walter Jesus Paucar Casas
Mechanics Based Design of Structures and Machines, v. 53 (11), p. 7435–7463 2025
@article{silva2025b,
title = {Evolutionary topology optimization applied to a system with fluid-structure interaction via maximization of the natural frequency},
author = {Vitor Souza Viana Silva and Gustavo Comerlato Rodrigues and Ederval de Souza Lisboa and Fernanda Bichet Link and Walter Jesus Paucar Casas},
year = {2025},
journal = {Mechanics Based Design of Structures and Machines},
volume = {53},
number = {11},
pages = {7435--7463},
doi = {10.1080/15397734.2025.2480707},
issn = {0360-1218},
date = {2025-04-07},
abstract = {The topology optimization method has been widely applied study the optimization of the dynamic behavior of multiphysics systems, such as systems with fluid-structure interaction, in order to produce efficient and reliable designs. Within this context, this work aims to contribute to the study of the topology optimization of these coupled systems through the optimization of a fluid-structure system subject to a structural volume constraint, by maximizing the natural frequency of the system considering interpolations of the material domains. To this end, the methodology involves the application of algorithms developed in fluid-structure systems with a nonsymmetrical matrix formulation, in displacement u of the structure and pressure p of the fluid, with movable boundary interface. Topology optimization is developed using the BESO (Bi-Directional Evolutionary Structural Optimization) method and implemented in a numerical computing environment, while finite element analysis is performed using a parametric programming language to customize simulations in FEM software. The results obtained demonstrate the applicability of the codes developed for natural frequency optimization problems in fluid-structure coupled systems, using different material interpolations, and the influence of the participation of fluid terms and left eigenvectors in the sensitivity analysis, highlighting that interpolation using the SIMP method showed convergence with consistent final topologies.},
keywords = {vibracoes, otimizacao},
}
Conference paper
Experimental analysis of creep preconditioning effects on the rupture performance of HMPE fibers for offshore mooring ropes
Daniel Magalhães da Cruz; Jakson Manfredini Vassoler; Felipe Tempel Stumpf; Marcelo de Ávila Barreto; Vanderlei Jesus Marques Luche Junior; Larissa Zangalli
Proceedings of the 28th international congress of mechanical engineering 2025
@inproceedings{cruz2025e,
title = {Experimental Analysis of Creep Preconditioning Effects on the Rupture Performance of HMPE Fibers for Offshore Mooring Ropes},
author = {Daniel Magalhães da Cruz and Jakson Manfredini Vassoler and Felipe Tempel Stumpf and Marcelo de Ávila Barreto and Vanderlei Jesus Marques Luche Junior and Larissa Zangalli},
year = {2025},
booktitle = {Proceedings of the 28th International Congress of Mechanical Engineering},
address = {Curitiba, Brasil},
doi = {10.26678/abcm.cobem2025.cob2025-0743},
issn = {2176-5472},
keywords = {mef, vibracoes, compositos, bioengenharia},
}
Conference paper
Fiber orientation optimization for mitigating stress concentration factors in perforated composite leaf-springs
Guilherme Binkowski Perroni; Lucas de Aguiar Germann; Daniel Milbrath de Leon
Ibero-latin american congress on computational methods in engineering (46. : 2025. : Vitória) 2025
@inproceedings{perroni2026a,
title = {Fiber orientation optimization for mitigating stress concentration factors in perforated composite leaf-springs},
author = {Guilherme Binkowski Perroni and Lucas de Aguiar Germann and Daniel Milbrath de Leon},
year = {2025},
booktitle = {Ibero-Latin American Congress on Computational Methods in Engineering (46. : 2025. : Vitória)},
address = {Vitória, Brasil},
doi = {10.55592/cilamce2025.v5i.14191},
issn = {2675-6269},
lume = {https://lume.ufrgs.br/handle/10183/311434},
abstract = {Advances in composite materials are enabling the replacement of traditional steel leaves in heavy duty vehicle suspension springs with composite ones. By means of analytical simulations written in Python and grounded in classical lamination theory, this study evaluates spring leaves at three fiber volume fractions (Vf = 50 %, 60 %, 70 %) composed of epoxy resin and basalt fiber, showing how systematic variation of fiber orientation and Vf governs axial stiffness, in plane and out of plane moduli, anisotropy ratios, transverse Poisson’s ratio, and stress concentration factors around the central circular discontinuity. Results indicate that optimizing Vf from 70 % down to 60% does not significantly alter stiffness while preserving reduced stress amplification within specific orientation windows, thereby providing practical guidelines for designing lighter high performance suspension components, highlighting the Topology optimization role in such designs.},
keywords = {otimizacao, vibracoes, mef},
}
Article
Filtered-x and Filtered-u LMS active noise control in ducts
Renan Roberto Benitz da Silva; Alexandre Marks Löw; Herbert Martins Gomes
Journal of Vibration and Control, v. 32 (17-18), p. 5326–5338 2025
@article{silva2025a,
title = {Filtered-x and Filtered-u LMS active noise control in ducts},
author = {Renan Roberto Benitz da Silva and Alexandre Marks Löw and Herbert Martins Gomes},
year = {2025},
journal = {Journal of Vibration and Control},
volume = {32},
number = {17-18},
pages = {5326--5338},
doi = {10.1177/10775463251369919},
issn = {1077-5463},
eissn = {1741-2986},
date = {2025-08-31},
abstract = {Prolonged noise exposure can cause problems related to hearing health, resulting in an attention deficit and eventually work accidents. This paper evaluates two methods of active noise control (ANC) in ducts: the Filtered-x LMS and a modified Filtered-u LMS algorithm that improves sound path identification by the optimization of the filters parameters. The ANC system is validated with the design and implementation of an experimental setup. A code was developed in MATLAB software language for microphone signal acquisition and speaker control. In general, the proposed control system obtained attenuations that depend on the type of noise evaluated (monotonal, multitonal, or broadband). The attenuation levels reach 23 dB for the monotonal test; however, in the tests for white noise, the system did not present pronounced attenuation.},
keywords = {vibracoes, otimizacao, transdutores},
}
Technical output
Fracture mechanics and applications using discrete element methods
Ignacio Iturrioz
2025
Show BibTeX
@misc{iturrioz2025b,
title = {Fracture Mechanics and Applications Using Discrete Element Methods},
author = {Ignacio Iturrioz},
year = {2025},
howpublished = {Produção técnica},
keywords = {mef, vibracoes},
}
Other
He-162 salamander
Rogério José Marczak
p. 22–31 2025
Show BibTeX
@misc{marczak2025j,
title = {He-162 Salamander},
author = {Rogério José Marczak},
year = {2025},
howpublished = {Texto em jornal ou revista: Air Modeller},
pages = {22--31},
issn = {2059-5964},
keywords = {mec, mef, compositos},
}
Conference paper
Identification of elastic and damping parameters of a truck suspension through metaheuristic optimization: A numerical-experimental approach
Douglas Fernando Zuffo Pedersetti; José Gilberto Picoral Filho; Herbert Martins Gomes; Walter Jesus Paucar Casas; Gianluca Pepe; Maicol Laurenza
Conference proceedings of ICNAAM 2025 (springer proceedings in mathematics & statistics), p. 1–5 2025
Show BibTeX
@inproceedings{filho2026a,
title = {Identification of elastic and damping parameters of a truck suspension through metaheuristic optimization: A numerical-experimental approach},
author = {Douglas Fernando Zuffo Pedersetti and José Gilberto Picoral Filho and Herbert Martins Gomes and Walter Jesus Paucar Casas and Gianluca Pepe and Maicol Laurenza},
year = {2025},
booktitle = {Conference Proceedings of ICNAAM 2025 (Springer Proceedings in Mathematics & Statistics)},
address = {Heraklion, Crete, Grécia},
pages = {1--5},
keywords = {vibracoes, otimizacao, transdutores},
}
Conference paper
Iinfluence of suspension failures on the dynamic behavior of a multibody vehicle
Sandro da Rosa Portella; Walter Jesus Paucar Casas
Anais do COBEM 2025 2025
Show BibTeX
@inproceedings{portella2025a,
title = {Iinfluence of suspension failures on the dynamic behavior of a multibody vehicle},
author = {Sandro da Rosa Portella and Walter Jesus Paucar Casas},
year = {2025},
booktitle = {Anais do COBEM 2025},
address = {Curitiba / PR, Brasil},
keywords = {vibracoes, otimizacao},
}
Article
Implementation of bond-based peridynamics in ansys LS-DYNA for brittle and quasi-brittle material failure analysis
Leandro Ferreira Friedrich; Vicente Bergamini Puglia; Angélica Bordin Colpo; Adryel V. G. Pinto; Ignacio Iturrioz; Erdogan Madenci
Mechanics of Advanced Materials and Structures, v. 33 (1), p. 2490816 2025
@article{friedrich2025c,
title = {Implementation of bond-based peridynamics in ansys LS-DYNA for brittle and quasi-brittle material failure analysis},
author = {Leandro Ferreira Friedrich and Vicente Bergamini Puglia and Angélica Bordin Colpo and Adryel V. G. Pinto and Ignacio Iturrioz and Erdogan Madenci},
year = {2025},
journal = {Mechanics of Advanced Materials and Structures},
volume = {33},
number = {1},
pages = {2490816},
doi = {10.1080/15376494.2025.2490816},
issn = {1537-6494},
eissn = {1537-6532},
date = {2025-04-21},
abstract = {This study presents the implementation of Bond-Based Peridynamic (PD) theory in Ansys LS-DYNA (referred to as PD-DYNA) using native elements to analyze the fracture behavior of brittle and quasi-brittle materials. It employs the classical prototype microelastic brittle (PMB) model for brittle materials and a bilinear PD model for quasi-brittle materials. To address the stochastic nature of quasi-brittle material properties, a novel approach is introduced by considering the randomness of the force-stretch relationship of the bonds. The PD-DYNA implementation is verified through two benchmark cases: an elastic plate with a hole under tension and dynamic crack propagation in an elastic plate with a preexisting edge crack. Also, the validity of the coupled PD-DYNA and finite element (FE) model is assessed using a square plate under tension. Following verification, the PD-DYNA implementation is applied to predict failure in quasi-brittle materials, with results compared to experimental data for three scenarios: (1) an L-shaped concrete panel under bending, (2) concrete beams of varying sizes subjected to three-point bending, and (3) rock specimens under tension. The PD-DYNA models accurately capture the global response of quasi-brittle material failure, aligning with experimental observations. They effectively reproduce characteristic behaviors, including kinked crack paths, material softening, and size effects.},
keywords = {mef, vibracoes},
}
Article
Inferring target reliability index of reinforced concrete beams in a standard fire situation according to Brazilian standards
Rodrigo Maffessoni Pires; Herbert Martins Gomes
Revista IBRACON de Estruturas e Materiais, v. 18 (3), p. e18310 2025
@article{pires2025a,
title = {Inferring target reliability index of reinforced concrete beams in a standard fire situation according to Brazilian standards},
author = {Rodrigo Maffessoni Pires and Herbert Martins Gomes},
year = {2025},
journal = {Revista IBRACON de Estruturas e Materiais},
volume = {18},
number = {3},
pages = {e18310},
doi = {10.1590/s1983-41952025000300010},
eissn = {1983-4195},
abstract = {Since there is no consensus in the literature on the target reliability index values of reinforced concrete structures in a fire situation, this article aims to present a methodology for inferring the implicit target reliability index range for reinforced concrete beams in a standard fire situation from the prescriptions of Brazilian standards. The limit state function used in the analysis compares the resisting bending moment and the applied bending moment on the structures, which are based on a reinforced concrete beam with representative characteristics for typical residential buildings in Brazil. Because of the aforementioned limit state function, in order to generate a target reliability index interval, it was considered a variation in the nominal cover value of the beams and a variation on the load ratio applied to them. The former variation is important because the cover is the variable that most influences the resistance of the beams in a fire situation, while the second variation is important because it is a variable that can cause changes in the applied bending moment of the structures. In this way, using a developed computational tool, based on the FORM Method, the reliability of the beams with fire resistance time greater than the Required Fire Resistance Time (TRRF in Portuguese) defined by standard is evaluated by the analytical method allowed by the Brazilian standard. In this context, a target reliability index interval was possible to be inferred for these structures ranging from 0.32 to 1.52. This interval, which represents the reliability for the TRRF of 60 minutes, can be divided according to the nominal value of the cover or the aggressiveness class of the beam’s environment and corresponds to a 6% to 37% probability of failure, which can be understood as conservative reliability.},
keywords = {vibracoes, otimizacao, transdutores},
}
Conference paper
Influence of depth of casting on concrete constitutive equations
Jorge D riera; Claudia A. Morel; Ignacio Iturrioz; Luis Eduardo Kosteski
proceedings of the 28th international conference on structural mechanics in reactor technology 2025
Show BibTeX
@inproceedings{iturrioz2025c,
title = {Influence of Depth of Casting on Concrete Constitutive Equations},
author = {Jorge D riera and Claudia A. Morel and Ignacio Iturrioz and Luis Eduardo Kosteski},
year = {2025},
booktitle = {proceedings of the 28th International Conference on Structural Mechanics in Reactor Technology},
address = {toronto, Canadá},
keywords = {mef, vibracoes},
}
Conference paper
Investigating precursors in complex systems: Insights from the fiber bundle model and the 2017 méxico MW8.2 earthquake
@inproceedings{friedrich2025e,
title = {Investigating Precursors in Complex Systems: Insights from the Fiber Bundle Model and the 2017 México MW8.2 Earthquake},
author = {Mariana Hamdan Padilha and Leandro Ferreira Friedrich and Ignacio Iturrioz and Luis Eduardo Kosteski},
year = {2025},
booktitle = {Mecánica Computacional},
pages = {765--774},
doi = {10.70567/mc.v42.ocsid8354},
eissn = {2591-3522},
date = {2025-12-03},
abstract = {Complex systems are characterized by self-organization, where interactions among constituent elements give rise to emergent patterns and critical transitions. In geophysics, earthquakes can be interpreted within this framework, where the analysis of precursor parameters provides critical insights into impending systemic instabilities. Among these, the temporal evolution of the b-value, derived from the Gutenberg-Richter frequency-magnitude scaling law, serves as a principal metric, with strong parallels drawn to Acoustic Emission (AE) studies in material failure. This work investigates critical-state precursors in two complementary case studies. The first employs AE time series generated from Fiber Bundle Model (FBM) simulations implemented via a Lattice Discrete Element Method (LDEM), enabling the characterization of progressive fracture and failure. The second examines the seismic sequence preceding the Mw 8.2 earthquake that struck Mexico in 2017. In both cases, the b- value and the Method of Critical Fluctuations (MCF-B) are applied to track the evolution of criticality. Results demonstrate that b-value variations consistently capture the transition to a critical regime, both in simulated and real seismic data. In contrast, MCF-B shows limited applicability in complex tectonic settings dominated by large, isolated events. These findings highlight the robustness of b-value analysis as a precursor, while also indicating the need for refining complementary approaches. The multiscale perspective adopted here contributes to advancing the identification of critical states in both acoustic and seismic domains, with implications for earthquake forecasting.},
keywords = {mef, vibracoes},
}
Article
Investigation on the fracture mechanism of self-healing mortar specimens using acoustic emission (AE) analysis and a lattice discrete element method (LDEM)
Giuseppe Lacidogna; Pedro Marin Montanari; Boris Nahuel Rojo Tanzi; Ignacio Iturrioz; Jean‐Marc Tulliani; Giovanni Anglani; Paola Antonaci
@article{tanzi2025a,
title = {Investigation on the Fracture Mechanism of Self-Healing Mortar Specimens Using Acoustic Emission (AE) Analysis and a Lattice Discrete Element Method (LDEM)},
author = {Giuseppe Lacidogna and Pedro Marin Montanari and Boris Nahuel Rojo Tanzi and Ignacio Iturrioz and Jean‐Marc Tulliani and Giovanni Anglani and Paola Antonaci},
year = {2025},
journal = {Sci},
volume = {7},
number = {1},
pages = {5--5},
doi = {10.3390/sci7010005},
issn = {2413-4155},
date = {2025-01-02},
lume = {https://lume.ufrgs.br/handle/10183/293412},
abstract = {This paper discusses the combined application of the Acoustic Emission (AE) technique and a Lattice Discrete Element Method (LDEM) to study the damage process in cement mortar specimens subjected to three-point bending tests. The experimental work was carried out in a previous study by the research team. The specimens contain macro-capsules filled with a polyurethane resin that promotes a self-healing mechanism upon crack formation. The numerical model here developed provides an estimate of the fracture energy of the resin, which is difficult to obtain by relying purely on experimental results. Furthermore, this study includes the analysis of both fracture energy and Acoustic Emission energy based on experimental tests using the same specimens. Through the comparison of experimental and numerical results, a correlation between the toughness of the specimens and AE activity is established. The findings indicate that, for the self-healing specimens, there is a decrease in fracture energy as the emitted Acoustic Emission (AE) energy increases.},
keywords = {mef, vibracoes},
}
Article
Machine learning applications in the development and analysis of suspension systems of road vehicles
Leonardo Roso Colpo; Maicon Molon; Herbert Martins Gomes
@article{colpo2025d,
title = {Machine Learning Applications in the Development and Analysis of Suspension Systems of Road Vehicles},
author = {Leonardo Roso Colpo and Maicon Molon and Herbert Martins Gomes},
year = {2025},
journal = {SAE Technical Papers},
doi = {10.4271/2025-36-0330},
abstract = {This paper aims to explore the application of machine learning techniques to the analysis of road suspension systems, with particular emphasis on mechanical leaf spring suspensions. These systems are essential for vehicle performance, as they guarantee comfort and stability while driving, and they have an intrinsically complex and non-linear dynamic behavior. Because of this complexity, traditional approaches often prove costly and insufficient to represent operating conditions. In this context, machine learning techniques stand out for their ability to learn patterns from experimental data, allowing the modelling of non-linear phenomena that characterize road implement suspensions. One of the main contributions of this study is the demonstration that machine learning algorithms are capable of identifying complex patterns to represent the behavior of the system, as well as facilitating the detection of anomalies and potential faults in the suspension system, contributing to predictive maintenance. The results indicate that the application of machine learning algorithms not only improves the accuracy of suspension performance analysis, but also offers an innovative approach to diagnosing and identifying problems. With the ability to process and analyze data in real-time, these technologies can be integrated into vehicle monitoring systems, allowing for quick and effective interventions. In conclusion, the use of machine learning in the analysis and design of road suspension systems represents a significant advance in automotive engineering. The research highlights the emergence of new research horizons in this area, suggesting that the combination of engineering knowledge and artificial intelligence can open up new frontiers for the development of more efficient and safer suspension systems.},
keywords = {vibracoes, otimizacao, transdutores},
}
Conference paper
Mathematical modeling and analysis of vibrations in rollerscreen sieves for
Jose Cleber Rodrigues da Silva; Marcos Vinicius Issa; Rogério José Marczak
Proc. COBEM 2025 2025
Show BibTeX
@inproceedings{marczak2025l,
title = {Mathematical Modeling and Analysis of Vibrations in Rollerscreen Sieves for},
author = {Jose Cleber Rodrigues da Silva and Marcos Vinicius Issa and Rogério José Marczak},
year = {2025},
booktitle = {Proc. COBEM 2025},
address = {Curitiba, Brasil},
keywords = {mec, mef, compositos},
}
Undergraduate thesis
Mechanical design of a be window for the RF cavities of the muon cooling complex
Isadora Rodrigues Boff
2025
Advisor: Daniel Milbrath de Leon
Show BibTeX
@misc{boff2025a,
title = {Mechanical Design of a Be Window for the RF Cavities of the Muon Cooling Complex},
author = {Isadora Rodrigues Boff},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
howpublished = {Trabalho de Conclusão de Curso},
keywords = {otimizacao, vibracoes, mef},
}
Article
Mechanical property evolution of ZE10A alloy subjected to thermomechanical treatments between 250 and 300 °C
Eduardo Luis Schneider; Charles Amaral de Jesus Cordeiro; Rodrigo Nazarof Saran; Jakson Manfredini Vassoler; Diego Tolotti de Almeida; Claudia Trindade Oliveira; Lisete Cristine Scienza; Fabrício Luiz Faita
Journal of Materials Research and Technology, v. 39, p. 6906–6914 2025
@article{vassoler2025a,
title = {Mechanical property evolution of ZE10A alloy subjected to thermomechanical treatments between 250 and 300 °C},
author = {Eduardo Luis Schneider and Charles Amaral de Jesus Cordeiro and Rodrigo Nazarof Saran and Jakson Manfredini Vassoler and Diego Tolotti de Almeida and Claudia Trindade Oliveira and Lisete Cristine Scienza and Fabrício Luiz Faita},
year = {2025},
journal = {Journal of Materials Research and Technology},
volume = {39},
pages = {6906--6914},
doi = {10.1016/j.jmrt.2025.10.266},
issn = {2238-7854},
date = {2025-11},
lume = {https://lume.ufrgs.br/handle/10183/302802},
abstract = {Magnesium alloys containing rare earth elements have been developed to improve ductility and reduce anisotropy. The ZE10A alloy (Elektron® 717) has demonstrated good performance in hot stamping applications. However, the formability of sheets made from this alloy at temperatures below 350 °C remains insufficiently studied. This work aims to investigate the relationship between thermomechanical treatments in the temperature range of 250–300 °C and the resulting mechanical properties and microstructural evolution of the ZE10A alloy. Uniaxial tensile tests were carried out at 250 °C, 275 °C, and 300 °C at a strain rate of 0.26 s⁻¹ to evaluate the yield strength, ultimate tensile strength, and elongation. The microstructure of the specimens was analyzed by optical microscopy, including average grain size measurements. The results showed that, as the temperature increased from 250 °C to 300 °C, the yield strength decreased by 11.7%, the ultimate tensile strength by 15.7%, and the elongation by 2.7%. Microstructural analysis revealed a transition from slightly elongated grains at 250 °C to partially equiaxed grains at 300 °C, indicating a modest increase in the fraction of dynamically recrystallized (DRX) grains. The average grain size decreased from 14.19 µm at 250 °C to 12.61 µm at 300 °C, suggesting the onset of DRX, although its extent may be limited by the presence of neodymium.},
keywords = {compositos, mef, bioengenharia},
}
Conference paper
MEMS sensors in structural health monitoring: Applications with 3D-printed materials
Mariana Hamdan Padilha; Maurício Da Silveira Rudem Mombach; Leandro Ferreira Friedrich; Vicente Bergamini Puglia; Mikael Da Cruz; Alessandro G. Girardi; Ignacio Iturrioz
@inproceedings{friedrich2025f,
title = {MEMS Sensors in Structural Health Monitoring: Applications with 3D-Printed Materials},
author = {Mariana Hamdan Padilha and Maurício Da Silveira Rudem Mombach and Leandro Ferreira Friedrich and Vicente Bergamini Puglia and Mikael Da Cruz and Alessandro G. Girardi and Ignacio Iturrioz},
year = {2025},
booktitle = {Mecánica Computacional},
address = {Buenos Aires, Brasil},
pages = {647--654},
doi = {10.70567/mc.v42.ocsid8460},
eissn = {2591-3522},
date = {2025-12-03},
abstract = {This study presents an acoustic emission (AE) monitoring strategy based on MEMS (Micro- Electro-Mechanical Systems) sensors applied to 3D-printed structures. AE data were analyzed using the b-value method to track damage development and Natural Time (NT) analysis to identify the onset of critical conditions. A comparison with a commercial piezoelectric sensor revealed similar performance, with both sensors detecting a reduction in the b-value preceding failure. MEMS sensors demonstrated an enhanced capacity to capture high-frequency signals. These results underline the potential of MEMS sensors as cost-effective tools for structural health monitoring in additive manufacturing contexts.},
keywords = {mef, vibracoes},
}
Conference paper
Metaheuristics-based structural optimization of an onshore steel wind turbine tower in accordance with NBR IEC 61400-1 Wind Speed Profiles
Rodrigo Maffessoni Pires; Herbert Martins Gomes
Proceedings of the 28th international congress on mechanical engineering, COBEM 2025, p. 1–9 2025
@inproceedings{pires2025c,
title = {Metaheuristics-based structural optimization of an onshore steel wind turbine tower in accordance with NBR IEC 61400-1 Wind Speed Profiles},
author = {Rodrigo Maffessoni Pires and Herbert Martins Gomes},
year = {2025},
booktitle = {Proceedings of the 28th International Congress on Mechanical Engineering, COBEM 2025},
address = {Curitiba, PR, Brasil},
pages = {1--9},
doi = {10.26678/abcm.cobem2025.cob2025-0277},
issn = {2176-5472},
keywords = {vibracoes, otimizacao, transdutores},
}
Master's dissertation
Metodologia de análise de fadiga multiaxial por elementos finitos com validação experimental : aplicação ao eixo da coluna de guindaste articulado
@mastersthesis{chiarello2025a,
title = {Metodologia de análise de fadiga multiaxial por elementos finitos com validação experimental : aplicação ao eixo da coluna de guindaste articulado},
author = {Héricles Chiarello},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
lume = {https://lume.ufrgs.br/handle/10183/297982},
abstract = {Os guindastes articulados são equipamentos essenciais em diversos setores, como construção, agricultura e indústria de petróleo e gás, devido à sua versatilidade no manuseio de cargas. A evolução desses equipamentos foca em melhorar a capacidade de elevação, alcance e segurança, ao mesmo tempo em que busca otimizar o peso e a velocidade operacional. Esses equipamentos operam em condições desafiadoras, com ciclos repetitivos e altas cargas de impacto, tornando a resistência à fadiga um fator crítico no projeto das estruturas. A previsão acurada da vida em fadiga dessas estruturas é complexa devido à diversidade de condições operacionais. A previsão da vida em fadiga de estruturas como o eixo da coluna de um guindaste articulado é desafiadora, dada a variedade de condições operacionais envolvidas. O objetivo deste trabalho foi aplicar nessa estrutura uma metodologia baseada na abordagem S-N, combinando experimentação e simulação numérica para estimar a vida útil à fadiga do componente. Embora a abordagem ideal fosse a baseada em deformações (ε-N), sua aplicação exigiria o monitoramento direto da estrutura com extensômetros durante o teste de durabilidade. Optou-se pelo método S-N devido à predominância de deformações elásticas, à disponibilidade de dados experimentais e à compatibilidade com as ferramentas de simulação utilizadas. A análise permitiu a identificação das regiões críticas do eixo da coluna, evidenciando que a parte frontal concentrou os maiores índices de dano acumulado locais, com valor de 6,1807, enquanto a parte traseira apresentou um valor significativamente inferior, de 1,018. Esse resultado é atribuído à maior amplitude das tensões trativas na parte frontal. A multiaxialidade foi classificada como baixa, com predominância da interação entre tensões axiais e de cisalhamento. No entanto, em ambas as regiões, a principal característica observada foi a elevada amplitude de tensão. A comparação entre diferentes métodos de estimativa de fadiga revelou que o critério da Tensão Normal Escalonada no Plano Crítico foi o mais aproximado, apresentando erro absoluto em torno de 1,8% em relação aos resultados experimentais do teste de durabilidade. Em contraste, os métodos baseados em tensões equivalentes superestimaram o dano.},
keywords = {vibracoes, otimizacao, transdutores},
}
Conference paper
Micrositing optimization for wind farm efficiency
Daniel Meireles; Herbert Martins Gomes
Proceedings of the 28th international congress of mechanical engineering, p. 1–10 2025
@inproceedings{gomes2025b,
title = {Micrositing Optimization for Wind Farm Efficiency},
author = {Daniel Meireles and Herbert Martins Gomes},
year = {2025},
booktitle = {Proceedings of the 28th International Congress of Mechanical Engineering},
address = {Curitiba, PR, Brasil},
pages = {1--10},
doi = {10.26678/abcm.cobem2025.cob2025-0814},
issn = {2176-5472},
keywords = {vibracoes, otimizacao, transdutores},
}
PhD thesis
Modelagem multiescala termoquimomecânica do processo de hidratação em materiais cimentícios heterogêneos
@phdthesis{kichel2025c,
title = {Modelagem multiescala termoquimomecânica do processo de hidratação em materiais cimentícios heterogêneos},
author = {Luciene de Souza Kichel},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
lume = {https://lume.ufrgs.br/handle/10183/294349},
abstract = {A reação de hidratação representa o conjunto de reações químicas que ocorre entre os silicatos e aluminatos do cimento quando em contato com a água, resultando na liberação de calor com mudanças microestruturais e de estado, onde o Material com Base em Cimento (MBC) evolui de uma pasta para um elemento sólido que adquire resistência mecânica ao longo do tempo. Para entender a complexidade dos fenômenos químicos, térmicos e mecânicos que ocorrem simultaneamente durante o processo de hidratação, uma análise multiescala do processo termoquimomecânico acoplado da hidratação da pasta de cimento foi proposta. Para isso, um procedimento de homogeneização computacional upscaling foi empregado, dividindo a microestrutura de um MBC em três níveis, sendo o Nível IV o concreto, o Nível III a argamassa e o Nível II a pasta de cimento. Dois modelos foram gerados no software comercial ABAQUS®, o modelo macroscópico representando o Nível IV e o modelo microscópico representando o Nível III, ambos discretizados por meio do Método de Elementos Finitos (MEF) tradicional. Para representar a microestrutura, composta pela matriz de pasta de cimento homogênea (Nível II) e agregados miúdos, um Elemento de Volume Representativo (EVR) foi gerado e posicionado em cada ponto de integração dos elementos do modelo em macroescala utilizando o método Direct finite element square (dFE2). Na sequência, os graus de liberdade das escalas micro e macroscópicas foram associados por meio de condições de contorno periódicas impostas na microescala. Dessa forma, todos os cálculos foram realizados na escala da pasta de cimento (Nível II) e as respostas térmica e mecânica na macroescala (Nível IV) sofrem influência dos agregados e Zona de Transição de Interface (ZTI). Várias geometrias macroscópicas foram modeladas, incluindo blocos massivos, geometrias em L e anéis com condições de contorno térmicas e mecânicas variadas. Duas aplicações foram desenvolvidas, iniciando pela análise termoquímica, onde sub-rotinas de usuário foram utilizadas para implementação dos modelos de hidratação, geração de calor e deformação associada à expansão/retração térmica e autógena. Na segunda aplicação, um modelo de dano foi proposto como principal contribuição desta pesquisa, identificando aspectos da pasta de cimento (microescala) que influenciam na evolução do dano e no comportamento mecânico do elemento estrutural (macroescala). De forma geral, os resultados indicaram que o modelo termoquimomecânico acoplado utilizando o dFE2 foi capaz de reproduzir a evolução da hidratação, temperatura, deformação e possíveis pontos de fissuração das estruturas analisadas. Efeitos esperados em MBCs, como a influência da ZTI na análise térmica e na nucleação das fissuras, foram capturados pelo modelo proposto, além do impacto da retração por secagem na deformação e evolução do dano. O efeito da fração de volume dos agregados também foi analisado no histórico de temperatura e de deformação, indicando que quando maior o volume de agregados, menor tende a ser temperatura e o dano na estrutura.},
keywords = {mef, ensaios},
}
Conference paper
Modeling random fiber networks in hyperelastic composites
Bárbara Thaís Jacques Minosso; Pietra de Castilhos Lagranha; Rogério José Marczak
Proceedings of the joint XLVI ibero-latin-american congress on computational methods in engineering 2025
@inproceedings{minosso2025b,
title = {Modeling Random Fiber Networks in Hyperelastic Composites},
author = {Bárbara Thaís Jacques Minosso and Pietra de Castilhos Lagranha and Rogério José Marczak},
year = {2025},
booktitle = {Proceedings of the joint XLVI Ibero-Latin-American Congress on Computational Methods in Engineering},
address = {Vitória, Brasil},
doi = {10.55592/cilamce2025.v5i.14439},
issn = {2675-6269},
abstract = {The mechanical behavior of elastomers reinforced with random fiber networks (RFNs) depends strongly on the microstructural organization. This work presents a computational approach for generating three-dimensional RFNs using a persistent random walk with orientation via the von Mises-Fisher distribution. The algorithm incorporates curvature control, fiber smoothing, and a self-avoidance criterion with collision detection to avoid fiber overlap. Fiber geometries are generated according to a target volume fraction through an iterative adjustment of the number of fibers and are exported for finite element analysis. The geometries of polyester fiber modeled as linear-elastic REINF264 elements in ANSYS are embedded into a hyperelastic RTV silicone rubber matrix modeled by a two-term Mooney-Rivlin formulation. Fibers were modeled as linear elastic reinforcement elements using REINF264 elements. Seven RVE sizes from 1 mm to 4 mm were tested under uniaxial deformation, and homogenized Cauchy stresses were computed to obtain the second Piola-Kirchhoff stress tensor and the effective material elasticity component C_1111. Results indicate convergence of the elastic response for L=3.5mm, suggesting this as the minimum RVE size for representing the given microstructure.},
keywords = {mec, mef, compositos},
}
Conference paper
Modeling the structural response of steel frames equipped with tuned liquid dampers under seismic excitation in OpenSees
Juan Felipe Vallejo Ospina; Letícia Fleck Fadel Miguel; Jesus Daniel Villalba Morales
Proceedings of the XLVI ibero-latin american congress on computational methods in engineering 2025
@inproceedings{miguel2026c,
title = {Modeling the Structural Response of Steel Frames Equipped with Tuned Liquid Dampers under Seismic Excitation in OpenSees},
author = {Juan Felipe Vallejo Ospina and Letícia Fleck Fadel Miguel and Jesus Daniel Villalba Morales},
year = {2025},
booktitle = {Proceedings of the XLVI Ibero-Latin American Congress on Computational Methods in Engineering},
address = {Vitória, Brasil},
doi = {10.55592/cilamce2025.v5i.14275},
issn = {2675-6269},
abstract = {Tuned Liquid Dampers (TLDs) are passive structural vibration control devices whose efficiency and low cost make them a promising solution in civil engineering applications. Their implementation is particularly beneficial in slender or high-rise structures, in which dynamic loads—such as wind or seismic excitations—can compromise structural safety, the integrity of non-structural components, and occupant comfort. The operational principle is based on tuning the fundamental sloshing frequency of the liquid to match the natural frequency of the structure’s dominant mode, thereby generating inertial forces on the tank walls that counteract the structural motion.This study numerically evaluates the performance of a rooftop-mounted TLD in a steel Moment-Resisting Frame (MRF) using OpenSees. The analysis includes both harmonic resonant excitations and representative seismic records. The TLD is modeled using an Equivalent Mechanical Model (EMM) based on Housner’s analogy, which captures the liquid’s nonlinear behavior through a coupled mass-spring-damper system.Results indicate that the EMM provides accurate predictions of the TLD’s response under conditions of low excitation amplitude and high structural damping, achieving notable reductions in dynamic response. However, a progressive loss of efficiency is observed as the liquid’s depth-to-length ratio (h/L) increases, underscoring the importance of this parameter in TLD design.},
keywords = {vibracoes, otimizacao},
}
Conference paper
Modelo numérico de metamateriais
Eduardo Henrique Rusch Brandt
Salão de iniciação científica (37. : 2025 out. 20-24 : UFRGS, porto alegre, RS) 2025
@inproceedings{brandt2025a,
title = {Modelo numérico de metamateriais},
author = {Eduardo Henrique Rusch Brandt},
year = {2025},
booktitle = {Salão de Iniciação Científica (37. : 2025 out. 20-24 : UFRGS, Porto Alegre, RS)},
lume = {https://lume.ufrgs.br/handle/10183/304123},
keywords = {mef, ensaios},
}
Conference paper
Monitoring structural integrity: Advanced techniques for assessing garisenda tower of bologna
Giuseppe Lacidogna; Stefano Invernizzi; Pedro Marin Montanari; Boris Nahuel Rojo Tanzi; Ignacio Iturrioz
proceedimg of IIIAE2025 2025
Show BibTeX
@inproceedings{tanzi2025d,
title = {Monitoring Structural Integrity: Advanced Techniques for Assessing Garisenda Tower of Bologna},
author = {Giuseppe Lacidogna and Stefano Invernizzi and Pedro Marin Montanari and Boris Nahuel Rojo Tanzi and Ignacio Iturrioz},
year = {2025},
booktitle = {proceedimg of IIIAE2025},
address = {Nagoya, Japão},
keywords = {mef, vibracoes},
}
Article
Multi‐objective optimization of reinforced concrete columns considering long‐term and second order effects: Constructability, cost, and environmental impact
Arthur de Caneda Preuss; Ewerton Grotti; Felipe Schaedler de Almeida; Herbert Martins Gomes
@article{preuss2025a,
title = {Multi‐objective optimization of reinforced concrete columns considering long‐term and second order effects: Constructability, cost, and environmental impact},
author = {Arthur de Caneda Preuss and Ewerton Grotti and Felipe Schaedler de Almeida and Herbert Martins Gomes},
year = {2025},
journal = {Structural Concrete},
volume = {26},
number = {6},
pages = {8116--8135},
doi = {10.1002/suco.70083},
issn = {1464-4177},
eissn = {1751-7648},
date = {2025-04-07},
abstract = {This work presents a methodology for the optimum design of reinforced concrete (RC) columns subjected to axial compression and bending end loads, considering long‐term and second‐order effects, designed according to the general method outlined in Eurocode 2 (EN 1992‐1‐1, 2004). The approach is applicable to columns of any slenderness, with arbitrary polygonal cross‐section shape and subjected to any combination of axial compression and bending end loads. The multi‐objective problem is formulated for the simultaneous improvement of cost, constructability, and environmental impact. The solution is obtained by the metaheuristic algorithms multi‐objective quantum particle swarm optimization (MOQPSO), multi‐objective particle swarm optimization (MOPSO) and the well‐established non‐dominated sorting genetic algorithm II (NSGA‐II). Examples of the optimization of RC columns with rectangular cross‐section and subjected to many load cases showed that cost and environmental impact can be minimized simultaneously at the expense of constructability, which is observed by the non‐linear Pareto frontier obtained for each pair of these conflicting objectives.},
keywords = {vibracoes, otimizacao, transdutores},
}
Article
Multiobjective optimization of laminated composite plates using metaheuristic algorithms
Guilherme Camerin Sager; Franz Hofstadler; Ewerton Grotti; Pedro Bührer Santana; Walter Jesus Paucar Casas; Herbert Martins Gomes
Mechanics Based Design of Structures and Machines, v. 53 (5), p. 3416–3433 2025
@article{casas2024a,
title = {Multiobjective optimization of laminated composite plates using metaheuristic algorithms},
author = {Guilherme Camerin Sager and Franz Hofstadler and Ewerton Grotti and Pedro Bührer Santana and Walter Jesus Paucar Casas and Herbert Martins Gomes},
year = {2025},
journal = {Mechanics Based Design of Structures and Machines},
volume = {53},
number = {5},
pages = {3416--3433},
doi = {10.1080/15397734.2024.2428748},
issn = {1539-7734},
eissn = {1539-7742},
date = {2025-05-04},
abstract = {This study introduces a multiobjective optimization algorithm for composite laminates, targeting natural frequencies, internal stresses, and buckling resistance with ply orientation as a primary design variable. Validated against experimental data, the algorithm allows for tailored designs focused on dynamic performance, strength, or buckling needs. Four cases are analyzed, including a graphite-epoxy composite optimized for multiple objectives, showing the significant impact of fiber orientation on achieving specific structural requirements. By generating effective Pareto fronts across varying design constraints, the method provides a scalable approach for complex laminate optimization. This research fills a literature gap, balancing computational efficiency with accuracy compared to benchmark problems.},
keywords = {vibracoes, otimizacao, transdutores},
sucupira = {42025648},
}
Conference paper
Multiscale assessment of damage during hydration of large structures
Rodrigo Rossi; Luciene de Souza Kichel; Tiago dos Santos; Reinaldo A. Anonis; Javier L. Mroginski
Ibero-latin american congress on computational methods in engineering (46. : 2025. : Vitória) 2025
@inproceedings{kichel2025b,
title = {Multiscale assessment of damage during hydration of large structures},
author = {Rodrigo Rossi and Luciene de Souza Kichel and Tiago dos Santos and Reinaldo A. Anonis and Javier L. Mroginski},
year = {2025},
booktitle = {Ibero-Latin American Congress on Computational Methods in Engineering (46. : 2025. : Vitória)},
address = {Vitória, Brasil},
doi = {10.55592/cilamce2025.v5i.14147},
issn = {2675-6269},
lume = {https://lume.ufrgs.br/handle/10183/311411},
abstract = {This work presents a multiscale framework for damage modeling in cement-based materials (CBM), incorporating the effects of hydration within their heterogeneous microstructure where the degradation occurs within the cement phase. Thus, damage initiation and evolution are influenced by microscale inhomogeneities, resulting in a meso-micromechanical damage formulation. To simulate the thermo-chemo-mechanical behavior of macroscopic structures, a two-scale finite element approach is adopted, the Direct FE2, in which the heterogeneous microstructure of the CBM is modeled through a representative volume element (RVE) where all the material properties, constitutive and evolution laws are defined. The entire framework is implemented in Abaqus® using a combination of Python scripting and Fortran user subroutines. A L-shaped body is presented to illustrate the evolution of damage. The results provide valuable insights into early-age damage mechanisms induced by hydration, highlighting the relationship between the heterogeneous CBM microstructure and the effective structural performance.},
keywords = {mef, ensaios},
}
Article
Multiscale investigation of seismic precursors before major earthquakes
Leandro Ferreira Friedrich; Mariana Hamdan Padilha; Giuseppe Lacidogna; Ignacio Iturrioz
Mechanics Research Communications, v. 147, p. 104449 2025
@article{friedrich2025b,
title = {Multiscale investigation of seismic precursors before major earthquakes},
author = {Leandro Ferreira Friedrich and Mariana Hamdan Padilha and Giuseppe Lacidogna and Ignacio Iturrioz},
year = {2025},
journal = {Mechanics Research Communications},
volume = {147},
pages = {104449},
doi = {10.1016/j.mechrescom.2025.104449},
issn = {0093-6413},
date = {2025-08},
abstract = {In various mechanical systems, the study of damage processes can be approached from the perspective of continuous phase transition phenomena, a subject typically explored within the framework of statistical physics. This viewpoint enables a more refined interpretation of failure precursors, which are of great importance in the field. The present study investigates failure precursors through two case studies: the material failure process by using the Fiber Bundle Model and the seismicity of the 2023 Turkey Mw7.7 earthquake. To identify the criticality, two approaches are considered: (1) Natural Time (NT) analysis and (2) the Method of Critical Fluctuation-Based (MCF-B) approach. By comparing the evolution of precursors in both cases, the findings highlight their potential for predicting critical situations.},
keywords = {mef, vibracoes},
}
Article
Nonlinear evaluation of reliability-based topology optimization of concrete deep beams
Rodrigo Reis Amaral; Jorge Luis Palomino Tamayo; Liércio André Isoldi; Herbert Martins Gomes
Revista IBRACON de Estruturas e Materiais, v. 18 (3), p. e18302 2025
@article{amaral2025b,
title = {Nonlinear evaluation of reliability-based topology optimization of concrete deep beams},
author = {Rodrigo Reis Amaral and Jorge Luis Palomino Tamayo and Liércio André Isoldi and Herbert Martins Gomes},
year = {2025},
journal = {Revista IBRACON de Estruturas e Materiais},
volume = {18},
number = {3},
pages = {e18302},
doi = {10.1590/s1983-41952025000300002},
eissn = {1983-4195},
abstract = {Uncertainty has long been a recognized aspect of engineering analysis and design. This inherent unpredictability is typically represented by variability and randomness. In this context, a linear elastic topology optimization (TO) approach with reliability constraints is presented. This method uses an outer loop for the optimization and an inner loop for the reliability analysis. The TO procedure based on the Bidirectional Evolutionary Structural Optimization (BESO) was developed to minimize the structure’s concrete compliance and, consequently, reduce the weight for a given reliability index constraint. Failure criterion, such as Ottosen's four-parameter surface is used to check the stress level in the computational domain. Moreover, a nonlinear finite element analysis for the resulting structure is developed in commercial software. The scope here is to conduct a comparative analysis between a reference deep beam from the literature and the optimized topologies to determine the ultimate strength capacity and assess how material reduction affects the failure mode and ultimate load. Results demonstrate resource-efficient and reliable designs with similar structural performance when compared to traditional concrete structures.},
keywords = {vibracoes, otimizacao, transdutores},
}
Article
Normalized stiffness assessment in mechanical protocol: polyester sub-ropes for offshore mooring systems
Daniel Magalhães da Cruz; Guilherme Ribeiro Begnini; Aleones José da Cruz Júnior; Felipe Tempel Stumpf; Jakson Manfredini Vassoler; Fernanda Mazuco Clain; Carlos Eduardo Marcos Guilherme
Ships and Offshore Structures, v. 1 (1), p. 1–17 2025
@article{cruz2025a,
title = {Normalized stiffness assessment in mechanical protocol: polyester sub-ropes for offshore mooring systems},
author = {Daniel Magalhães da Cruz and Guilherme Ribeiro Begnini and Aleones José da Cruz Júnior and Felipe Tempel Stumpf and Jakson Manfredini Vassoler and Fernanda Mazuco Clain and Carlos Eduardo Marcos Guilherme},
year = {2025},
journal = {Ships and Offshore Structures},
volume = {1},
number = {1},
pages = {1--17},
doi = {10.1080/17445302.2025.2537941},
issn = {1744-5302},
eissn = {1754-212X},
date = {2025-07-28},
keywords = {mef, vibracoes, compositos, bioengenharia},
}
Article
Numerical analysis of cross-laminated timber (CLT) buildings: a parametric study on steel connectors when subjected to seismic loading under eurocode 8 and NBR 15421
Lucas Costa Victoria; Caroline D. Aquino; Jorge M. Branco; Letícia Fleck Fadel Miguel
@article{victoria2025a,
title = {Numerical Analysis of Cross-Laminated Timber (CLT) Buildings: A Parametric Study on Steel Connectors When Subjected to Seismic Loading Under Eurocode 8 and NBR 15421},
author = {Lucas Costa Victoria and Caroline D. Aquino and Jorge M. Branco and Letícia Fleck Fadel Miguel},
year = {2025},
journal = {Buildings},
volume = {15},
number = {5},
pages = {754},
doi = {10.3390/buildings15050754},
eissn = {2075-5309},
date = {2025-02-25},
lume = {https://lume.ufrgs.br/handle/10183/288471},
abstract = {Cross-laminated timber (CLT) presents significant potential for sustainable construction but requires further investigation under seismic conditions. This study develops a numerical model to evaluate the seismic design requirements of CLT buildings according to European (Eurocode 8) and Brazilian (NBR 15421) standards. Experimental data from a full-scale CLT building were used to validate the model. The model was then applied to assess seismic design according to standard requirements across different geographic locations, and a parametric investigation was conducted to evaluate the impact of the connector design on structural performance. The results indicate that the tested CLT building was overdesigned for all evaluated regions, and a significant reduction in displacements—up to 33%—is achieved by adjusting the quantity of the connectors. Additionally, the analysis shows limitations in NBR 15421, as it resulted in higher average lateral displacements due to insufficient consideration of energy dissipation. These findings underscore the importance of optimising connector configurations to enhance the seismic performance of CLT buildings while reducing overdesign. Additionally, properly considering energy dissipation in design standards is crucial. In particular, the Brazilian standard would benefit from a comprehensive review to better address energy dissipation, ensuring safer and more efficient seismic designs.},
keywords = {vibracoes, otimizacao},
}
Conference paper
Numerical investigation of aerodynamic noise reduction using trailing-edge serrations for wind tubine aplication.
Laura Reisdorfer; Giuliano Demarco; Carlos Eduardo de Souza; Adrián Roberto Wittwer
Proceedings of the 28th international congress of mechanical engineering 2025
@inproceedings{souza2025d,
title = {Numerical Investigation of Aerodynamic Noise Reduction Using Trailing-Edge Serrations for Wind Tubine Aplication.},
author = {Laura Reisdorfer and Giuliano Demarco and Carlos Eduardo de Souza and Adrián Roberto Wittwer},
year = {2025},
booktitle = {Proceedings of the 28th International Congress of Mechanical Engineering},
address = {Curitiba, Brasil},
doi = {10.26678/abcm.cobem2025.cob2025-2314},
issn = {2176-5472},
keywords = {otimizacao, mef},
}
Conference paper
Numerical modeling and simulation of wind-induced water elevation by tropical cyclones using shallow water equations
Marcos Wilson Ogata; Renato Vaz Linn; Alexandre Luis Braun; Herbert Martins Gomes
Proceedings of the CILAMCE 2025, 24-27 nov. 2025, p. 1–7 2025
@inproceedings{ogata2025d,
title = {Numerical Modeling and Simulation of Wind-Induced Water Elevation By Tropical Cyclones Using Shallow Water Equations},
author = {Marcos Wilson Ogata and Renato Vaz Linn and Alexandre Luis Braun and Herbert Martins Gomes},
year = {2025},
booktitle = {Proceedings of the CILAMCE 2025, 24-27 nov. 2025},
address = {Vit[oria, ES, Brasil},
pages = {1--7},
doi = {10.55592/cilamce2025.v5i.14210},
issn = {2675-6269},
abstract = {Modeling the interaction between storms such as tropical cyclones over the ocean is highly relevant in the fields of ocean, coastal, and offshore engineering, as it enables the forecasting of loads and risks, as well as the mitigation of damages caused by these extreme events in coastal areas. The present study aims to investigate the water elevation caused by the formation of tropical cyclones at sea, using the Finite Element Method to solve the Shallow Water Equations. The wind generated by the cyclone was simulated using an analytical model that accounts for meteorological parameters and their interaction with water bodies, modeled as tangential stresses applied to the free surface. After verifying the shallow water flow solver with a benchmark problem, simulations of wind-induced flows were performed considering two different domains: one with constant bathymetry and another representing a linearly varying coastal region. The effects of model parameters describing the tropical cyclone were investigated and discussed. As a result, it was found that the most significant factors influencing water elevation are the radius at which the cyclone's maximum wind speed occurs and the pressure difference between the storm center and its periphery, leading to considerable water elevation in the most severe cases. In contrast, the translational speed of the cyclone had little impact on water elevation, whereas smaller wind incidence angles produced higher elevations along the coastline. Finally, an additional investigation is presented, considering a more complex domain configuration to illustrate the potential applications of the proposed model.},
keywords = {vibracoes, otimizacao, transdutores},
}
Conference paper
Numerical modeling of skin-core interfacial debonding in composite sandwich beams: a comparative study between continuous and discrete methods.
Eduardo Miorelli Rech; Augusto Bisio de Souza; Javier Alexander Zambrano Carrillo; Ignacio Iturrioz; Daniel Milbrath de Leon
Ibero-latin american congress on computational methods in engineering (46. : 2025. : Vitória) 2025
@inproceedings{rech2025a,
title = {Numerical modeling of skin-core interfacial debonding in composite sandwich beams: a comparative study between continuous and discrete methods.},
author = {Eduardo Miorelli Rech and Augusto Bisio de Souza and Javier Alexander Zambrano Carrillo and Ignacio Iturrioz and Daniel Milbrath de Leon},
year = {2025},
booktitle = {Ibero-Latin American Congress on Computational Methods in Engineering (46. : 2025. : Vitória)},
address = {Vitoria, Brasil},
doi = {10.55592/cilamce2025.v5i.14404},
issn = {2675-6269},
lume = {https://lume.ufrgs.br/handle/10183/311442},
abstract = {Sandwich beams are structures made of different materials with the goal of combining high bending stiffness and low mass. Nevertheless, they are prone to failure modes, especially debonding at the material interfaces. This study focuses on comparing two numerical techniques for modeling the initiation and propagation of such failures: the Cohesive Zone Model (CZM) implemented through Finite Element Methods (FEM), and the Lattice Discrete Element Method (LDEM). The configuration examined comprises fibrous-composite outer skins and a polymeric core bonded by resin-based adhesives, providing valuable guidance on the computational modeling of characteristic failure modes and supporting more informed material and geometry selections when designing sandwich structures. The computational models were reproduced using Altair® HyperMesh and OpitStruct for the FEM implementation and a Fortran code for the LDEM approach. The comparison is carried out through the force versus displacement curve generated by each model, which may serve as a reference for future studies in the field of sandwich beam debonding numerical analysis.},
keywords = {otimizacao, vibracoes, mef},
}
Conference paper
Numerical modeling of the stress-strain response in progressive loading cycles of polyester multifilaments
Daniel Magalhães da Cruz; Tales Luiz Popiolek Júnior; Ivan Napoleão Bastos; Adilson Pinto da Silva; Ana Lucia Nazareth da Silva; Jakson Manfredini Vassoler; Felipe Tempel Stumpf
Anais do encontro nacional de modelagem computacional e encontro de ciência e tecnologia de materiais 2025
@inproceedings{cruz2026h,
title = {Numerical Modeling of the Stress-Strain Response in Progressive Loading Cycles of Polyester Multifilaments},
author = {Daniel Magalhães da Cruz and Tales Luiz Popiolek Júnior and Ivan Napoleão Bastos and Adilson Pinto da Silva and Ana Lucia Nazareth da Silva and Jakson Manfredini Vassoler and Felipe Tempel Stumpf},
year = {2025},
booktitle = {Anais do Encontro Nacional de Modelagem Computacional e Encontro de Ciência e Tecnologia de Materiais},
address = {Universidade Estadual de Monte, Brasil},
doi = {10.29327/1453544.1206181},
keywords = {mef, vibracoes, compositos, bioengenharia},
}
Article
On the experimental determination of concrete compressive and tensile strengths
Claudia Morel; Jorge Riera; Ignacio Iturrioz
concreto & construções, v. 117 (117), p. 1 2025
Show BibTeX
@article{iturrioz2025a,
title = {On the Experimental Determination of Concrete Compressive and Tensile Strengths},
author = {Claudia Morel and Jorge Riera and Ignacio Iturrioz},
year = {2025},
journal = {concreto & construções},
volume = {117},
number = {117},
pages = {1},
keywords = {mef, vibracoes},
}
Article
On the influence of material property uncertainties for a phenomenological progressive damage in composite laminated coupons: A sensitivity analysis approach
Pedro Bührer Santana; Herbert Martins Gomes; António J.M. Ferreira; Volnei Tita
@article{santana2025a,
title = {On the influence of material property uncertainties for a phenomenological progressive damage in composite laminated coupons: A sensitivity analysis approach},
author = {Pedro Bührer Santana and Herbert Martins Gomes and António J.M. Ferreira and Volnei Tita},
year = {2025},
journal = {Composite Structures},
volume = {366},
pages = {119209},
doi = {10.1016/j.compstruct.2025.119209},
issn = {0263-8223},
date = {2025-08},
keywords = {vibracoes, otimizacao, transdutores},
}
Conference paper
On the objectivity of the multiscale response in transient thermal conduction problems
Reinaldo A. Anonis; Javier L. Mroginski; Sebastián Toro; Rodrigo Rossi; Pablo J. Sánchez
Resúmenes de mecánica computacional, p. 113–113 2025
@inproceedings{rossi2025a,
title = {On the Objectivity of the Multiscale Response in Transient Thermal Conduction Problems},
author = {Reinaldo A. Anonis and Javier L. Mroginski and Sebastián Toro and Rodrigo Rossi and Pablo J. Sánchez},
year = {2025},
booktitle = {Resúmenes de Mecánica Computacional},
address = {Buenos Aires, Brasil},
pages = {113--113},
doi = {10.70567/rmc.v2.ocsid8500},
eissn = {3072-7723},
date = {2025-12-15},
abstract = {The multiscale modeling has been consolidated as a fundamental tool for the study of heterogeneous materials and multiphysics phenomena in engineering. In particular, the computational homogenization technique based on the Representative Volume Element (RVE) has proven to be effective in the description of systems with complex behavior. However, the extension of these methods to transient thermal problems has revealed significant challenges, especially with the appearance of a thermal inertia or second order term that introduce an undesirable dependence on the size of the micro-scale, compromising the objectivity of the macroscopic response. Several investigations have addressed this problem in the context of transient heat conduction and thermomechanical problems. In most cases they highlight the importance of preserving the second-order term that emerges from the first-order computational homogenization process when dealing with these transient phenomena, by capturing the dynamic effects associated with the micro-structure. In this sense, the present work seeks to provide a better understanding of this term, showing in a clear and simple way which is the specific component that generates the undesired dependence with the size of the micro-scale. Once this detrimental effect has been identified, a solution is proposed that eliminates only the component responsible for the loss of objectivity in the macroscopic response, preserving the rest of the components of the inertial term, and therefore, the physical richness associated with the transient micro-structure. This proposal, using the Method of Multiscale Virtual Power (MMVP) as a theoretical framework and implemented by means of a squared finite element (FE2) computational scheme, offers a robust and coherent framework for the homogenization of transient phenomena, improving the reliability and applicability of multiscale modeling in engineering problems.},
keywords = {mef, ensaios},
}
Article
Optimal sensor placement for modal identification of large truss structures using the Circle-Inspired Optimization Algorithm
Kristian Yuiti Matsushita; Letícia Fleck Fadel Miguel; Jesús D. Villalba-Morales
@article{matsushita2025a,
title = {Optimal sensor placement for modal identification of large truss structures using the Circle-Inspired Optimization Algorithm},
author = {Kristian Yuiti Matsushita and Letícia Fleck Fadel Miguel and Jesús D. Villalba-Morales},
year = {2025},
journal = {Evolutionary Intelligence},
volume = {18},
number = {6},
pages = {117},
doi = {10.1007/s12065-025-01098-8},
issn = {1864-5909},
eissn = {1864-5917},
date = {2025-10-27},
lume = {https://lume.ufrgs.br/handle/10183/302976},
abstract = {Determining the optimal placement of a fixed number of sensors in a structure to assess its structural integrity remains an open challenge, primarily due to the need to define an appropriate optimization algorithm and select a suitable quality metric. This study evaluates the performance of the recently developed Circle-Inspired Optimization Algorithm (CIOA) for sensor placement in truss structures. CIOA has demonstrated strong performance in structural design optimization and is therefore a promising candidate for addressing the sensor placement problem. Regarding quality metrics, several objective functions are considered to evaluate sensor configurations, including the Fisher Information Matrix and Modal Kinetic Energy. To assess the robustness and scalability of the proposed approach, five large trusses with varying levels of complexity are analyzed. The results show that sensor distributions are strongly influenced by the chosen criterion, with the Effective Independence-based objective function generally yielding more spatially distributed configurations. Moreover, the findings indicate that the search space contains numerous local optima, underscoring the need for additional performance criteria to compare sensor arrays generated using CIOA. Comparative analyses with well-known metaheuristic algorithms further demonstrate CIOA’s effectiveness. A sensitivity analysis of the two CIOA parameters is conducted, revealing that using the values recommended by the CIOA authors ensures efficient and accurate convergence. Therefore, the approach proposed in this paper proved to be a useful tool for optimal sensor placement.},
keywords = {vibracoes, otimizacao},
}
Conference paper
Optimization framework for multi-material mooring lines applied to floating offshore wind turbines
Gabriel Rodrigo Hilgert; Felipe Tempel Stumpf
Xlvi cilamce 2025
Show BibTeX
@inproceedings{hilgert2025b,
title = {Optimization framework for multi-material mooring lines applied to floating offshore wind turbines},
author = {Gabriel Rodrigo Hilgert and Felipe Tempel Stumpf},
year = {2025},
booktitle = {XLVI CILAMCE},
address = {Vitória, Brasil},
keywords = {mef, vibracoes},
}
Article
Optimization of inerter‐based dynamic vibration absorbers for vibration control in buildings subjected to seismic excitations
Patrick de Oliveira Batista da Costa; Letícia Fleck Fadel Miguel
@article{costa2025a,
title = {Optimization of Inerter‐Based Dynamic Vibration Absorbers for Vibration Control in Buildings Subjected to Seismic Excitations},
author = {Patrick de Oliveira Batista da Costa and Letícia Fleck Fadel Miguel},
year = {2025},
journal = {Shock and Vibration},
volume = {2025},
number = {1},
pages = {5280674},
doi = {10.1155/vib/5280674},
issn = {1070-9622},
eissn = {1875-9203},
date = {2025-01},
lume = {https://lume.ufrgs.br/handle/10183/302982},
abstract = {The design of dynamic vibration absorbers (DVAs), such as tuned mass dampers (TMDs), often requires substantial mass, limiting their application in buildings. To enhance seismic performance, the mechanical inerter, a device that amplifies mass, has emerged as a promising alternative. Integrated into DVAs, TMD Inerter (TMDI) and tuned inerter damper (TID) leverage this effect to improve vibration control. This study proposes a comprehensive methodology to optimize TMDI and TID devices through systematic comparison of three metaheuristic algorithms—gray wolf optimization (GWO), salp swarm algorithm (SSA), and circle‐inspired optimization algorithm (CIOA)—with specific focus on the influence of device positioning and acceleration disparity between inerter terminals. Three buildings with distinct dynamics are analyzed to minimize story drift under artificial seismic loads, with optimization parameters selected within practically feasible ranges based on existing inerter technology implementations. A total of 693 simulations were performed for the 7 different proposed situations. The results, validated against 12 real earthquakes representing both near‐fault and far‐fault scenarios, reveal that TMDI and TID outperform TMDs, with GWO achieving superior displacement reductions in fewer iterations. The findings highlight the critical role of acceleration disparity in inerter effectiveness, demonstrating that positioning at base or mid‐height locations maximizes performance by exploiting acceleration differences between terminals. The proposed methodology proved effective and can offer valuable insights and tools to support the practical design and optimization of these innovative devices for real‐world seismic applications.},
keywords = {vibracoes, otimizacao},
}
Conference paper
Optimization of multiple dva in wind turbine towers under seismic loads
Fabián Alberto Flores González; Herbert Martins Gomes; Said Elias
Proceedings of 28 th international congress of mechanical engineering, COBEM 2025, p. 1–10 2025
@inproceedings{gonzalez2025a,
title = {Optimization of Multiple Dva in Wind Turbine Towers Under Seismic Loads},
author = {Fabián Alberto Flores González and Herbert Martins Gomes and Said Elias},
year = {2025},
booktitle = {Proceedings of 28 th International Congress of Mechanical Engineering, COBEM 2025},
address = {Curitiba, PR, Brasil},
pages = {1--10},
doi = {10.26678/abcm.cobem2025.cob2025-0195},
issn = {2176-5472},
keywords = {vibracoes, otimizacao, transdutores},
}
Article
Optimized strut-and-tie design for double-sided corbels using multi-material topology optimization under multiple load cases
Rodrigo Reis Amaral; Herbert Martins Gomes; Jorge Luis Palomino Tamayo
International Journal of Mechanics and Materials in Design, v. 21 (3), p. 641–665 2025
@article{amaral2025a,
title = {Optimized strut-and-tie design for double-sided corbels using multi-material topology optimization under multiple load cases},
author = {Rodrigo Reis Amaral and Herbert Martins Gomes and Jorge Luis Palomino Tamayo},
year = {2025},
journal = {International Journal of Mechanics and Materials in Design},
volume = {21},
number = {3},
pages = {641--665},
doi = {10.1007/s10999-025-09760-w},
issn = {1569-1713},
eissn = {1573-8841},
date = {2025-05-09},
keywords = {vibracoes, otimizacao, transdutores},
}
Master's dissertation
Otimização da Orientação de Laminados de Fibra de Basalto Visando a Mitigação do fator de Concentração de tensão em Furos Passantes
Guilherme Binkowski Perroni
2025
Advisor: Daniel Milbrath de Leon
Show BibTeX
@mastersthesis{perroni2025b,
title = {Otimização da Orientação de Laminados de Fibra de Basalto Visando a Mitigação do fator de Concentração de tensão em Furos Passantes},
author = {Guilherme Binkowski Perroni},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
keywords = {otimizacao, vibracoes, mef},
}
Master's dissertation
Otimização de dispositivos passivos de dissipação de energia - TMD e K-Damper - para redução de vibração em um modelo de ônibus utilizando o CIOA
@mastersthesis{mondin2025a,
title = {Otimização de dispositivos passivos de dissipação de energia - TMD e K-Damper - para redução de vibração em um modelo de ônibus utilizando o CIOA},
author = {Victor Provensi Mondin},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
lume = {https://lume.ufrgs.br/handle/10183/296372},
abstract = {Este trabalho desenvolveu e avaliou, por meio de simulações numéricas, o uso de dispositivos passivos para a redução de vibrações verticais no assento do motorista de um ônibus. Foram implementadas rotinas computacionais para modelar a dinâmica do veí- culo original, com dez graus de liberdade, e para otimizar os parâmetros de dois modelos modificados com a adição dos seguintes dispositivos: o Tuned Mass Damper (TMD) e o K-Damper. O modelo foi excitado por três perfis de pista estocásticos de classe C, conforme a ISO 8608, 2016, e as otimizações foram realizadas utilizando o Circle-Inspired Optimization Algorithm (CIOA). As análises iniciais no modelo original indicaram que, nas condições de pista consideradas, a aceleração ponderada no assento do motorista ultrapassou limites aceitáveis segundo normas como a NHO-09, 2012, a NR-15, 2022 e a ISO 2631-1, 2016. Nos dois modelos modificados, após a instalação de cada um dos dispositivos otimizados, os resultados mostraram que, enquanto o TMD promoveu reduções moderadas nas acelerações ponderadas, o K-Damper apresentou desempenho superior, alcançando reduções acima de 50% e reclassificando a condição de exposição do condutor segundo normas de saúde ocupacional.},
keywords = {vibracoes, otimizacao},
}
Undergraduate thesis
Otimização de estruturas treliçadas com utilização do algoritmo meta-heurístico MFO
@misc{wegner2025a,
title = {Otimização de estruturas treliçadas com utilização do algoritmo meta-heurístico MFO},
author = {Rodrigo Sudré Wegner},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
howpublished = {Trabalho de Conclusão de Curso},
lume = {https://lume.ufrgs.br/handle/10183/295837},
abstract = {A otimização de estruturas da indústria automotiva, civil e aeronáutica permite o melhoramento de projetos existentes com o intuito de obter soluções eficientes em termos de custo, desempenho e segurança. Historicamente, técnicas de otimização matemática determinísticas têm sido amplamente utilizadas para resolver problemas de otimização. No entanto, esses métodos enfrentam desafios significativos, especialmente em casos que envolvem ótimos locais. Este trabalho apresenta a implementação e comparação de forma sistemática e estatística do desempenho do algoritmo meta-heurístico Moth-Flame Optimization (MFO), que não usa gradientes e é inspirado em paradigma da natureza, em problemas de otimização de massas estruturais com restrições de frequências naturais, encontrados na literatura. O estudo aborda o funcionamento do algoritmo, com suas vantagens e desvantagens, sendo implementados na resolução uma série de exemplos, que são discutidos e analisados de forma estatística. Por fim, conclui-se que o algoritmo apresenta características únicas interessantes que o tornam uma alternativa promissora para os tipos de problemas analisados, pois a diferença máxima apresentada foi apenas 2,43% acima do peso mínimo estrutural já reportado em um dos casos, quando comparado a outros algoritmos consolidados.},
keywords = {vibracoes, otimizacao, transdutores},
}
Conference paper
Otimização estrutural aplicada a materiais viscoelásticos e anisotrópicos
Guilherme Gross Sostizzo
Salão de iniciação científica (37. : 2025 out. 20-24 : UFRGS, porto alegre, RS) 2025
@inproceedings{sostizzo2025a,
title = {Otimização estrutural aplicada a materiais viscoelásticos e anisotrópicos},
author = {Guilherme Gross Sostizzo},
year = {2025},
booktitle = {Salão de Iniciação Científica (37. : 2025 out. 20-24 : UFRGS, Porto Alegre, RS)},
lume = {https://lume.ufrgs.br/handle/10183/304553},
keywords = {mef, vibracoes},
}
Master's dissertation
Otimização estrutural da célula de sobrevivência em veículos de transporte de passageiros sob condições de capotamento regulamentares conforme a resolução CONTRAN nº 629/2016
Felipe Spengler
2025
Advisor: Daniel Milbrath de Leon
Show BibTeX
@mastersthesis{spengler2025b,
title = {Otimização Estrutural da Célula de Sobrevivência em Veículos de Transporte de Passageiros sob Condições de Capotamento Regulamentares Conforme a Resolução CONTRAN nº 629/2016},
author = {Felipe Spengler},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
keywords = {otimizacao, vibracoes, mef},
}
Master's dissertation
Otimização robusta de amortecedores de massa sintonizados com atrito em estrutura submetida a excitações sísmicas
João Victor Restelatto
2025
Advisor: Letícia Fleck Fadel Miguel · Co-advisor: Sergio Pastor Ontiveros Perez
@mastersthesis{restelatto2025a,
title = {Otimização robusta de amortecedores de massa sintonizados com atrito em estrutura submetida a excitações sísmicas},
author = {João Victor Restelatto},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
lume = {https://lume.ufrgs.br/handle/10183/294333},
abstract = {Esta dissertação trata da otimização robusta de múltiplos amortecedores de massa sintonizados com atrito (MAMSA) aplicados ao controle de vibrações em estruturas sujeitas a excitações sísmicas. O estudo é focado em melhorar a resposta estrutural de um edifício de dez andares frente a eventos sísmicos, reduzindo o deslocamento relativo entre andares através da aplicação de MAMSA otimizados. Para gerar excitações sísmicas artificiais, utiliza-se o método de Kanai-Tajimi, que modela os terremotos com base em dados estatísticos fornecidos de frequência, amortecimento e pico de aceleração do solo. Em seguida, o desempenho de MAMSA é verificado por meio de simulações com registros de sismos reais, assegurando a aplicabilidade dos resultados. A estratégia de otimização robusta desenvolvida nesta dissertação considera incertezas nas variáveis de entrada do sismo artificial, da estrutura principal e dos MAMSA, com busca de valores ótimos de rigidez e força de atrito para cada dispositivo instalado. Para realizar a otimização, é utilizado o algoritmo meta-heurístico Circle-Inspired Optimization Algorithm (CIOA), que se mostra eficaz em buscar soluções robustas em cenários complexos e com múltiplos graus de liberdade. Três cenários de disposição dos MAMSA são considerados, variando a quantidade e a localização dos dispositivos ao longo do edifício, de forma a avaliar diferentes configurações e buscar a melhor solução para reduzir a resposta dinâmica da estrutura. O estudo avalia o desempenho dos diferentes cenários com base nos limites normativos de máximo deslocamento relativo entre andares, assegurando que as soluções estejam em conformidade com a norma americana de segurança estrutural ASCE/SEI 7-22. As rotinas computacionais necessárias para a análise dinâmica e a implementação da metodologia de otimização foram desenvolvidas em MATLAB e o método de Newmark foi empregado para obter a resposta dinâmica da estrutura. Os resultados obtidos demonstram a eficácia da metodologia proposta, comprovando que MAMSA otimizados proporcionam uma redução significativa nas respostas estruturais.},
keywords = {vibracoes, otimizacao},
}
PhD thesis
Otimização robusta de sistema de controle híbrido (AMR+ADS) para a redução de vibrações em edifícios submetidos a sismos
@phdthesis{brandao2025a,
title = {Otimização robusta de sistema de controle híbrido (AMR+ADS) para a redução de vibrações em edifícios submetidos a sismos},
author = {Francisco da Silva Brandão},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
lume = {https://lume.ufrgs.br/handle/10183/299723},
abstract = {Vibrações excessivas podem causar muitos danos às edificações podendo até mesmo levar ao colapso estrutural, que além de perdas econômicas, podem causar perda de vidas. Nesse contexto, o controle de vibrações é uma alternativa capaz de reduzir essas vibrações a níveis aceitáveis conforme critérios de controle presentes em normas de projeto. Sendo assim, este trabalho investiga a eficiência de um sistema de controle de vibrações híbrido, composto por amortecedores magneto-reológicos (AMR) e atenuador dinâmico sincronizado (ADS), na redução do deslocamento relativo entre andares (story drift) de edifícios submetidos a sismos. Dois edifícios de diferentes alturas foram analisados (EDF 01 com 4 andares e EDF 02 com 10 andares) considerando excitações sísmicas reais e artificiais. O desempenho do sistema de controle foi avaliado em diferentes cenários, quais sejam: AMR desligados (AMR-OFF), AMR ligados com corrente constante (AMR-ON), AMR com controle de corrente via LQR (COLQR), ADS otimizado e controle híbrido (AMR+ADS) com parâmetros otimizados através do algoritmo WOA. O critério de controle adotado foi o limite de story drift correspondente a 1/400 da altura do andar (0,0075 m). Em campo determinístico, os resultados demonstraram que o controle híbrido (AMR+ADS) foi o único capaz de adequar a resposta estrutural ao critério de controle para ambos os edifícios e em todos os sismos aplicados, reduzindo significativamente os deslocamentos relativos em todos os andares. No EDF 01 por exemplo, o sistema híbrido reduziu o story drift do primeiro andar em aproximadamente 67,55% para a excitação SANE 1. Em campo aleatório foram inseridas incertezas nas propriedades dos edifícios e do sistema de controle, as quais foram modeladas como variáveis aleatórias com distribuição Normal, e os resultados mostraram que o sistema híbrido reduziu significativamente a média e a variância dos story drift, indicando uma minimização das incertezas na resposta estrutural em ambas as edificações. No caso do EDF 02, mesmo com maior altura e complexidade dinâmica que o EDF 01, o controle híbrido se mostrou eficaz tanto em campo determinístico quanto em campo aleatório, para todos os sismos aplicados, gerando bom desempenho sobretudo nos andares inferiores, onde o story drift tende a ser mais crítico. A estratégia de controle híbrido demonstrou robustez frente às incertezas estruturais e de projeto do sistema de controle, configurando-se como uma solução eficiente para mitigar os efeitos dinâmicos provocados por sismos e atendendo aos critérios normativos de controle em ambas as abordagens (determinística e aleatória).},
keywords = {vibracoes, otimizacao},
}
Undergraduate thesis
Previsão indireta de tensões e deformações baseada em acelerometria e expansão modal
Andrei Mikoski Rosa
2025
Advisor: Walter Jesus Paucar Casas · Co-advisor: Herbert Martins Gomes
@misc{rosa2025a,
title = {Previsão indireta de tensões e deformações baseada em acelerometria e expansão modal},
author = {Andrei Mikoski Rosa},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
howpublished = {Trabalho de Conclusão de Curso},
lume = {https://lume.ufrgs.br/handle/10183/295632},
abstract = {O presente trabalho visa investigar a possibilidade de ajustar as tensões e deformações obtidas através de um cálculo pelo método dos elementos finitos do tipo análise modal a partir de dados obtidos através de acelerômetros posicionados em uma estrutura excitada em suas frequências naturais. Essas tensões e deformações ajustadas serão comparadas com dados obtidos através de strain gauges colados na estrutura. A abordagem é especialmente útil quando da impossibilidade física da instrumentação direta com sensores de deformação (extensômetros) por falta de acesso ou da necessidade de uma grande quantidade deles. Isto permite uma medição de forma não intrusiva, viável em larga escala e com possibilidade de monitoramento contínuo dos estados de tensões de sistemas. Assim, o objetivo deste trabalho é verificar a viabilidade de determinar as tensões e deformações causadas pelos efeitos vibratórios, de forma indireta, a partir do uso conjunto de sensores para análise modal e com o auxílio de conjunto com filtros e integradores numéricos, em estruturas que trabalhem próximo de frequências naturais com fontes de excitação.},
keywords = {vibracoes, otimizacao, transdutores},
}
Undergraduate thesis
Proposta experimental para análise dinâmica de coxins de alta capacidade: um estudo aplicado a uma cabine de colheitadeira
João dos Santos Neto
2025
Advisor: Herbert Martins Gomes
Show BibTeX
@misc{neto2025a,
title = {Proposta experimental para análise dinâmica de coxins de alta capacidade: um estudo aplicado a uma cabine de colheitadeira},
author = {João dos Santos Neto},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
howpublished = {Trabalho de Conclusão de Curso},
keywords = {vibracoes, otimizacao, transdutores},
}
Article
Reducing the dynamic response of self-supporting lattice towers with optimized connection dampers
Luiz Guilherme Grotto; Letícia Fleck Fadel Miguel; João Kaminski Junior
Archive of Applied Mechanics, v. 95 (12), p. 270 2025
@article{grotto2025a,
title = {Reducing the dynamic response of self-supporting lattice towers with optimized connection dampers},
author = {Luiz Guilherme Grotto and Letícia Fleck Fadel Miguel and João Kaminski Junior},
year = {2025},
journal = {Archive of Applied Mechanics},
volume = {95},
number = {12},
pages = {270},
doi = {10.1007/s00419-025-02981-7},
issn = {0939-1533},
eissn = {1432-0681},
date = {2025-11-09},
keywords = {vibracoes, otimizacao},
}
Article
Reliability-based simultaneous optimization of quantities, positions, and parameters of inerter-based vibration absorbers to minimize the probability of building failure during earthquakes via the CIOA
Letícia Fleck Fadel Miguel; Patrick de Oliveira Batista da Costa; Sergio Pastor Ontiveros Pérez; Otávio Augusto Peter de Souza
Mechanics Based Design of Structures and Machines, v. 53 (6), p. 4270–4293 2025
@article{miguel2025a,
title = {Reliability-based simultaneous optimization of quantities, positions, and parameters of inerter-based vibration absorbers to minimize the probability of building failure during earthquakes via the CIOA},
author = {Letícia Fleck Fadel Miguel and Patrick de Oliveira Batista da Costa and Sergio Pastor Ontiveros Pérez and Otávio Augusto Peter de Souza},
year = {2025},
journal = {Mechanics Based Design of Structures and Machines},
volume = {53},
number = {6},
pages = {4270--4293},
doi = {10.1080/15397734.2024.2447755},
issn = {1539-7734},
eissn = {1539-7742},
date = {2025-01-02},
abstract = {This study introduces a novel approach for the reliability-based optimal design of inerter-based dynamic vibration absorbers (IDVAs), such as tuned inerter dampers (TIDs) and tuned mass damper inerters (TMDIs) to be implemented in buildings located in seismic areas. Additionally, the proposed approach is also applied to conventional tuned mass dampers (TMDs) for comparison purposes. Rather than focusing solely on optimizing the parameters of IDVAs and overlooking uncertainties through deterministic optimizations, the approach proposed here seeks to minimize the risk of building failure, using fragility curves, by optimizing not only the device parameters but also the quantities and positions of IDVAs, considering the inherent uncertainties associated with seismic excitation. To achieve this, the Circle-Inspired Optimization Algorithm (CIOA), a modern optimization technique developed by the authors, is implemented. Actual seismic accelerogram data from the target site are utilized to assess seismic risk, determining the expected annual exceedance rate of peak ground acceleration (PGA). Probability distribution functions of PGA for one and 50-year periods are fitted to estimate seismic risk, which is then evaluated through numerical simulations to ascertain building reliability. To illustrate the proposed methodology, it is studied a building located in Cúcuta, Colombia, where earthquake data are available. Robust estimators of system reliability are computed using a diverse seismic records database. The findings demonstrate that the proposed simultaneous optimization methodology significantly enhances the reliability of the building, underscoring the effectiveness of IDVAs in reducing the probability of building failure in regions with substantial seismic activity, and also showing that solutions with TMDIs or TIDs are more advantageous than those with TMDs.},
keywords = {vibracoes, otimizacao},
}
Technical output
Revisão de artigo submetido ao periódico mechanics based design of structures and machines, an international journal
Letícia Fleck Fadel Miguel
2025
Show BibTeX
@misc{miguel2025b,
title = {Revisão de artigo submetido ao periódico Mechanics Based Design of Structures and Machines, An International Journal},
author = {Letícia Fleck Fadel Miguel},
year = {2025},
howpublished = {Produção técnica},
keywords = {vibracoes, otimizacao},
}
Article
Revisiting the bi-dimensional elastic three-layer beam analytical solution: a novel solution for various loads followed by an XFEM numerical verification
Erik da Rosa Rodriguez; Rodrigo Rossi
Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 47 (10), p. 466 2025
@article{rodriguez2025a,
title = {Revisiting the bi-dimensional elastic three-layer beam analytical solution: a novel solution for various loads followed by an XFEM numerical verification},
author = {Erik da Rosa Rodriguez and Rodrigo Rossi},
year = {2025},
journal = {Journal of the Brazilian Society of Mechanical Sciences and Engineering},
volume = {47},
number = {10},
pages = {466},
doi = {10.1007/s40430-025-05779-4},
issn = {1678-5878},
eissn = {1806-3691},
date = {2025-08-02},
keywords = {mef, ensaios},
}
Conference paper
Safety assessment of a tractor semi-trailer based on handling and stability maneuvers
Carlos Eduardo Henke Viganico; Luis Roberto Centeno Drehmer; Walter Jesus Paucar Casas
Proceedings of the institution of mechanical engineers part D journal of automobile engineering, p. 4554–4566 2025
@inproceedings{viganico2026a,
title = {Safety assessment of a tractor semi-trailer based on handling and stability maneuvers},
author = {Carlos Eduardo Henke Viganico and Luis Roberto Centeno Drehmer and Walter Jesus Paucar Casas},
year = {2025},
booktitle = {Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering},
pages = {4554--4566},
doi = {10.1177/09544070251355301},
issn = {0954-4070},
date = {2025-08-21},
abstract = {The UN General Assembly proclaimed the Decade of Action for Road Safety 2021–2030, aiming to prevent at least 50% of road traffic deaths and injuries by 2030. A safe transport system is mandatory for road freight, where heavy vehicle accidents cause more severe personal and financial consequences. In this context, the purpose of this work is to determine the limits of the main handling and stability parameters of a tractor semi-trailer based on maneuvers such as Steady State Cornering (SSC), Double Lane Change (DLC), and Tilt Table Ratio (TTR). The methodology consisted in modeling the tractor semi-trailer using MSC.Adams/Car™ software validated with experimental procedures. The tractor semi-trailer was modeled as a multibody system (MBS), which considers the chassis of a semi-trailer a flexible body using the modal superposition method and the component modal synthesis method, based on an analysis by the finite element method (FEM). In addition, leaf spring suspensions were also considered flexible bodies, and a specific Pacejka tire model was used. Numerical simulations of the SSC maneuver were validated experimentally through RMS values of the rolling angle and lateral acceleration at speeds of 25 and 30 km/h. The DLC maneuver, in turn, was validated at speeds of 35 and 45 km/h, with slight differences observed as a function of human behavior. The simulations indicated that the vehicle may roll over at speeds of close to 38 km/h during SSC and at 55 km/h during DLC, with lateral acceleration between 0.35 g and 0.41 g , respectively. The TTR simulations showed a corresponding rollover limit with a lateral acceleration of 0.35 g . Lastly, the results of this work can be used for safety assessments of the lateral dynamic behavior of semi-trailers.},
keywords = {vibracoes, otimizacao},
}
Conference paper
Seat-induced vibration transmission to a biodynamic model in a freight vehicle
Jônatas Soller Vianna; Rafael Ramanzini; Vitor Siqueira Figueiredo; Lucas Miranda Visnievski; Walter Jesus Paucar Casas
Anais do CILAMCE 2025 2025
Show BibTeX
@inproceedings{vianna2025a,
title = {Seat-induced vibration transmission to a biodynamic model in a freight vehicle},
author = {Jônatas Soller Vianna and Rafael Ramanzini and Vitor Siqueira Figueiredo and Lucas Miranda Visnievski and Walter Jesus Paucar Casas},
year = {2025},
booktitle = {Anais do CILAMCE 2025},
address = {Vitória / ES, Brasil},
keywords = {vibracoes, otimizacao},
}
Conference paper
Sensitivity of reinforcement spatial variability in concrete slabs for deflection serviceability
Daiane Della Libera Leite; Herbert Martins Gomes
Proceedings of the institution of civil engineers - structures and buildings, p. 643–655 2025
@inproceedings{leite2025a,
title = {Sensitivity of reinforcement spatial variability in concrete slabs for deflection serviceability},
author = {Daiane Della Libera Leite and Herbert Martins Gomes},
year = {2025},
booktitle = {Proceedings of the Institution of Civil Engineers - Structures and Buildings},
pages = {643--655},
doi = {10.1680/jstbu.25.00021},
issn = {0965-0911},
eissn = {1751-7702},
date = {2025-06-20},
abstract = {Reinforced concrete (RC) structures can be affected by unpredictability in design, loading, modelling assumptions, geometric deviations and construction errors. The aim of this study was to analyse the impact of construction-related imperfections – specifically slab geometry variation and reinforcement placement – on the safety and performance of solid RC slabs. These imperfections were treated as random variables. The sensitivity of slab deflections to parameters arising from both material properties and construction variability was evaluated. The methodology used incorporated spatial variability of reinforcement through stochastic fields, analysed using the finite-element method. Simulations were performed using Ansys software, in which concrete was modelled using the Drucker–Prager criterion and reinforcement was modelled using a bilinear elastoplastic model with isotropic hardening. The behaviour of slabs with perfectly placed reinforcement and slabs with irregular placement was compared. The results show that the compressive strength of concrete and the geometric dimensions of the slab were the most influential factors on deflection. Variability in reinforcement placement produced behaviour similar to that of ideal placement, suggesting minimal impact on final deflections. These findings highlight the critical role of concrete strength and slab geometry, while minor deviations in reinforcement positioning appear to have a negligible effect on the overall structural performance of slabs.},
keywords = {vibracoes, otimizacao, transdutores},
}
Conference paper
Simulating crowds: Biodynamic models and vibration attenuation with TMD in footbridges
Leonardo Dornela Alves da Rocha; Herbert Martins Gomes; Marcelo André Toso
Proceedings of the 28th international congress of mechanical engineering, COBEM 2025, 9-14 nov 2025, p. 1–10 2025
@inproceedings{rocha2025a,
title = {Simulating Crowds: Biodynamic Models and Vibration Attenuation with TMD in Footbridges},
author = {Leonardo Dornela Alves da Rocha and Herbert Martins Gomes and Marcelo André Toso},
year = {2025},
booktitle = {Proceedings of the 28th International Congress of Mechanical Engineering, COBEM 2025, 9-14 nov 2025},
address = {Curitiba, Brasil},
pages = {1--10},
doi = {10.26678/abcm.cobem2025.cob2025-0010},
issn = {2176-5472},
keywords = {vibracoes, otimizacao, transdutores},
}
Article
Single angle columns connected through the leg – stability and design assessment
Ângelo Simonetto Pessutto; Herbert Martins Gomes; Enio Carlos Mesacasa Júnior
@article{pessutto2025b,
title = {Single Angle Columns Connected Through the Leg – Stability and Design Assessment},
author = {Ângelo Simonetto Pessutto and Herbert Martins Gomes and Enio Carlos Mesacasa Júnior},
year = {2025},
journal = {ce/papers},
volume = {8},
number = {6},
pages = {1186--1191},
doi = {10.1002/cepa.70203},
issn = {2509-7075},
date = {2025-12-01},
abstract = {Angle columns are widely used as bracing members in planar and space trusses. These elements are typically connected through one leg, introducing eccentricity between the connection plane and the cross‐section centroid. This eccentricity, along with the rotational stiffness of the connection, which is generally misaligned with the principal axes, affects the compressive strength and buckling behavior. Current design methods rely on effective slenderness concepts calibrated empirically to account for these effects. In this study, a new design approach is proposed using shell finite element analyses in ANSYS, combined with available experimental data. The method incorporates both global and local buckling effects based on the actual boundary conditions of single‐angle columns connected by one leg. A parametric study covering a wide range of slenderness and geometric configurations supports the development of new design expressions. The results are compared with existing standards, showing improved consistency. Further experimental studies are suggested to enhance the proposed methodology.},
keywords = {vibracoes, otimizacao, transdutores},
}
Conference paper
Single angle columns connected through the leg ? Stability and design assessment
Angelo Simonetto Pessuto; Herbert Martins Gomes; Enio Carlos Mesacasa Júnior
Proceedings of SDSS 2025, p. 1186–1191 2025
Show BibTeX
@inproceedings{gomes2025k,
title = {Single Angle Columns Connected Through the Leg ? Stability and Design Assessment},
author = {Angelo Simonetto Pessuto and Herbert Martins Gomes and Enio Carlos Mesacasa Júnior},
year = {2025},
booktitle = {Proceedings of SDSS 2025},
address = {Barcelona, Brasil},
pages = {1186--1191},
keywords = {vibracoes, otimizacao, transdutores},
}
Conference paper
Statistical evaluation of structural mass optimization with natural frequency constraints using the moth-flame optimization algorithm
Rodrigo Sudré Wegner; Herbert Martins Gomes
Proceedings of the 28th international congress of mechanical engineering, COBEM 2025, p. 1–10 2025
@inproceedings{gomes2025g,
title = {Statistical Evaluation of Structural Mass Optimization with Natural Frequency Constraints Using the Moth-Flame Optimization Algorithm},
author = {Rodrigo Sudré Wegner and Herbert Martins Gomes},
year = {2025},
booktitle = {Proceedings of the 28th International Congress of Mechanical Engineering, COBEM 2025},
address = {Curitiba, Brasil},
pages = {1--10},
doi = {10.26678/abcm.cobem2025.cob2025-0486},
issn = {2176-5472},
keywords = {vibracoes, otimizacao, transdutores},
}
Article
Strength assessment of composite beams under combined loads for application in mechanical suspension systems
Eduardo Dambros Telli; Gustavo Prates Mezzomo; Daniel Milbrath de Leon; Jakson Manfredini Vassoler; Eduardo Miorelli Rech; Joel Boaretto; Alberto Sakata; Ignacio Iturrioz
Engineering Failure Analysis, v. 177, p. 109685 2025
@article{telli2025a,
title = {Strength assessment of composite beams under combined loads for application in mechanical suspension systems},
author = {Eduardo Dambros Telli and Gustavo Prates Mezzomo and Daniel Milbrath de Leon and Jakson Manfredini Vassoler and Eduardo Miorelli Rech and Joel Boaretto and Alberto Sakata and Ignacio Iturrioz},
year = {2025},
journal = {Engineering Failure Analysis},
volume = {177},
pages = {109685},
doi = {10.1016/j.engfailanal.2025.109685},
issn = {1350-6307},
date = {2025-08},
keywords = {otimizacao, vibracoes, mef, compositos, bioengenharia},
}
Conference paper
Structural reliability analysis of reinforced concrete: a comparison of MCS, FORM, SORM, and parallelized subset simulation in julia
Kristian Yuiti Matsushita; Herbert Martins Gomes; Felipe Schaedler de Almeida; Marius Bittner; Lukas Fristsch
@inproceedings{gomes2026c,
title = {Structural Reliability Analysis of Reinforced Concrete: A Comparison of MCS, FORM, SORM, and Parallelized Subset Simulation in Julia},
author = {Kristian Yuiti Matsushita and Herbert Martins Gomes and Felipe Schaedler de Almeida and Marius Bittner and Lukas Fristsch},
year = {2025},
booktitle = {Proceedings of the CILAMCE 2025},
address = {Vitória, ES, Brasil},
pages = {1--8},
doi = {10.55592/cilamce2025.v5i.14042},
issn = {2675-6269},
abstract = {In civil engineering, estimating the probability of rare events is essential for ensuring the safety and reliability of structural systems. Scenarios such as failures in reinforced concrete elements, progressive collapse, and performance-based design require accurate evaluation of low-probability events. Traditional methods like Monte Carlo Simulation (MCS), the First-Order Reliability Method (FORM), and the Second-Order Reliability Method (SORM) are widely used due to their theoretical foundation and practical simplicity. However, MCS becomes computationally prohibitive for rare events, while FORM and SORM may lose accuracy in nonlinear or non-Gaussian problems, common in structural analysis. Subset Simulation (SuS) overcomes these limitations by decomposing the rare event into a sequence of intermediate events, sampled efficiently through Markov Chain Monte Carlo (MCMC) techniques. To reduce computational time, SuS can be parallelized by distributing the sampling across multiple processors, this strategy enables faster analysis without compromising accuracy, making it suitable for large-scale models in civil engineering. This work explores the use of MCS, FORM, SORM, and SuS within the Julia programming environment, which offers high-performance computing capabilities. The methods are evaluated based on accuracy, computational cost, and robustness across a range of examples, including benchmark problems and structural models of reinforced concrete. Results indicate that SuS delivers accurate estimates with significantly fewer samples. When parallelized, it becomes a computationally efficient tool for reliability analysis in civil engineering, outperforming traditional methods in complex scenarios.},
keywords = {vibracoes, otimizacao, transdutores},
}
Conference paper
Structural reliability of wind turbine towers with multiple loading cases and surrogate modeling
Marcos Wilson Ogata; Herbert Martins Gomes; Felipe Schaedler de Almeida
Proceedings of the 28th international congress of mechanical engineering, p. 1–10 2025
@inproceedings{ogata2025b,
title = {Structural Reliability of Wind Turbine Towers with Multiple Loading Cases and Surrogate Modeling},
author = {Marcos Wilson Ogata and Herbert Martins Gomes and Felipe Schaedler de Almeida},
year = {2025},
booktitle = {Proceedings of the 28th International Congress of Mechanical Engineering},
address = {Curitiba, PR, Brasil},
pages = {1--10},
doi = {10.26678/abcm.cobem2025.cob2025-0813},
issn = {2176-5472},
keywords = {vibracoes, otimizacao, transdutores},
}
Article
Teaching machine learning by implementing automatic detection of pavement in bicycles rides using smartphone accelerometer data
Martin H. M. Maruyama; Carlos Eduardo de Souza
International Journal of Mechanical Engineering Education, v. 54 (3), p. 600–620 2025
@article{souza2025a,
title = {Teaching machine learning by implementing automatic detection of pavement in bicycles rides using smartphone accelerometer data},
author = {Martin H. M. Maruyama and Carlos Eduardo de Souza},
year = {2025},
journal = {International Journal of Mechanical Engineering Education},
volume = {54},
number = {3},
pages = {600--620},
doi = {10.1177/03064190251317498},
issn = {0306-4190},
eissn = {2050-4586},
date = {2025-02-10},
abstract = {Machine learning is becoming a very important topic in modern society and it is also mandatory that engineering undergraduate students have some background on the field. It can be applied in mechanical engineering in various forms such as machinery design, fluid mechanics analysis and vibrations monitoring. During bicycle riding, the cyclist is subject to mechanical vibrations due to the pavement irregularities, and a prolonged or frequent exposition to vibrations might become harmful and bring problems to hand and arms. In this work we propose a vibration measurement procedure using a bicycle and a smartphone accelerometer with data acquisition performed by free applications. The time data is processed externally, and four machine learning algorithms are trained with real data obtained from different road pavement conditions: asphalt pavement, dirt road and stone pavement. The mechanical vibrations of two positions in bicycle structure (handlebar and frame) were also investigated. To process the acquired data, eight different statistical features were considered. In general, the Gradient Boosting Machine classifier presented the best performance according to its scores on each testing condition, with 84.99% and 96.38% accuracies in classifying vibration signals with 3 and 2 classes, respectively. The proposed teaching methodology was approved by different groups of students. For most of them, it was a first contact with the field, and helped stimulate interest in the subject and for future applications.},
keywords = {otimizacao, mef},
}
Conference paper
The damage process in structures with quasi-brittle behavior in the perspective of complex system
Ignacio Iturrioz; Boris Nahuel Rojo Tanzi; Leandro Ferreira Friedrich; Angélica Bordin Colpo; Giuseppe Lacidogna
proceedimg of IIIAE2025 2025
Show BibTeX
@inproceedings{iturrioz2025d,
title = {The Damage Process in Structures with Quasi-Brittle behavior in the perspective of Complex System},
author = {Ignacio Iturrioz and Boris Nahuel Rojo Tanzi and Leandro Ferreira Friedrich and Angélica Bordin Colpo and Giuseppe Lacidogna},
year = {2025},
booktitle = {proceedimg of IIIAE2025},
address = {japao, Japão},
keywords = {mef, vibracoes},
}
Conference paper
Thermal and flow characterization of standard and low-creep high-modulus polyethylene synthetic fibers
Daniel Magalhães da Cruz; Larissa Basei Zangalli; Jakson Manfredini Vassoler; Felipe Tempel Stumpf; Marcelo de Ávila Barreto; Ivan Napoleão Bastos; Ana Lúcia Nazareth Da Silva
Proceedings of the 18th brazilian polymer conference (18thCBPol), p. 1840–1844 2025
Show BibTeX
@inproceedings{cruz2025n,
title = {Thermal and Flow Characterization of Standard and Low-creep High-modulus Polyethylene Synthetic Fibers},
author = {Daniel Magalhães da Cruz and Larissa Basei Zangalli and Jakson Manfredini Vassoler and Felipe Tempel Stumpf and Marcelo de Ávila Barreto and Bastos, Ivan Napoleão and Da Silva, Ana Lúcia Nazareth},
year = {2025},
booktitle = {Proceedings of the 18th Brazilian Polymer Conference (18thCBPol)},
address = {Campos do Jordão, Brasil},
pages = {1840--1844},
keywords = {mef, vibracoes, compositos, bioengenharia},
}
Presentation
Topology optimization as an innovation tool for industry
Daniel Milbrath de Leon
2025
Show BibTeX
@misc{leon2025a,
title = {Topology Optimization as an Innovation Tool for Industry},
author = {Daniel Milbrath de Leon},
year = {2025},
howpublished = {Apresentação de trabalho: 23rd International Conference on International Exchange of Professionals},
keywords = {otimizacao, vibracoes, mef},
}
Technical output
Topology optimization of multifunctional materials, fluids and structures in XLVI ibero-latin american congress on computational methods in engineering (CILAMCE)
Anderson Pereira; Daniel Milbrath de Leon; Emílio Carlos Nelli Silva; Ivan Fabio Mota de Menezes
2025
Show BibTeX
@misc{leon2025b,
title = {Topology Optimization of Multifunctional Materials, Fluids and Structures in XLVI Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)},
author = {Anderson Pereira and Daniel Milbrath de Leon and Emílio Carlos Nelli Silva and Ivan Fabio Mota de Menezes},
year = {2025},
howpublished = {Produção técnica},
keywords = {otimizacao, vibracoes, mef},
}
Article
Trigonometric shear deformation theories for geometric nonlinear analysis of curved composite laminated shells: Post-buckling prediction using a parallelized approach
Pedro Bührer Santana; A.J.M. Ferreira; Herbert Martins Gomes; Volnei Tita
@article{santana2025b,
title = {Trigonometric shear deformation theories for geometric nonlinear analysis of curved composite laminated shells: Post-buckling prediction using a parallelized approach},
author = {Pedro Bührer Santana and A.J.M. Ferreira and Herbert Martins Gomes and Volnei Tita},
year = {2025},
journal = {Thin-Walled Structures},
volume = {214},
pages = {113379},
doi = {10.1016/j.tws.2025.113379},
issn = {0263-8231},
date = {2025-09},
keywords = {vibracoes, otimizacao, transdutores},
}
Conference paper
Two-stage topology optimization of concrete slabs reinforced with steel using a Bidirectional Evolutionary Structural Optimization approach
Alexandre Caio Milani; Herbert Martins Gomes; Rodrigo Reis Amaral; Felipe Schaedler de Almeida
Proceedings of the CILAMCE 2025, 24-27 nov. 2025, p. 1–8 2025
Show BibTeX
@inproceedings{gomes2025h,
title = {Two-stage topology optimization of concrete slabs reinforced with steel using a Bidirectional Evolutionary Structural Optimization approach},
author = {Alexandre Caio Milani and Herbert Martins Gomes and Rodrigo Reis Amaral and Felipe Schaedler de Almeida},
year = {2025},
booktitle = {Proceedings of the CILAMCE 2025, 24-27 nov. 2025},
address = {Vitória, Brasil},
pages = {1--8},
keywords = {vibracoes, otimizacao, transdutores},
}
Undergraduate thesis
Um estudo sobre configurações mecânicas de placas de titânio para cirurgias crânio-bucomaxilofacial
Lucas da Silva Bueno
2025
Advisor: Herbert Martins Gomes
Show BibTeX
@misc{bueno2025a,
title = {Um estudo sobre configurações mecânicas de placas de titânio para cirurgias crânio-bucomaxilofacial},
author = {Lucas da Silva Bueno},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
howpublished = {Trabalho de Conclusão de Curso},
keywords = {vibracoes, otimizacao, transdutores},
}
Undergraduate thesis
Uma estratégia para a análise multiescala de materiais compósitos em malhas planas usando o Direct FE2 no Abaqus
@misc{oliveira2025a,
title = {Uma estratégia para a análise multiescala de materiais compósitos em malhas planas usando o Direct FE2 no Abaqus},
author = {Hassan Augusto Bittencourt de Oliveira},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
howpublished = {Trabalho de Conclusão de Curso},
lume = {https://lume.ufrgs.br/handle/10183/295716},
abstract = {Este trabalho apresenta o desenvolvimento de um script para a geração de modelos para o método dFE2 (Direct Finite Element squared) no software Abaqus. O objetivo principal é otimizar a configuração de Elementos de Volume Representativo (EVRs) em malhas macroscópicas planas estruturadas e não estruturadas, especialmente no cálculo do Jacobiano (𝐽𝑖) e no ajuste da espessura (𝑡𝑖) dos EVRs para garantir consistência energética. A metodologia envolveu a criação de um script em Python que, integrado à Abaqus Scripting Interface (ASI), lê a malha macroscópica, calcula 𝐽𝑖 e 𝑡𝑖 por ponto de integração, instancia e posiciona os EVRs, e gera as Multi-Point Constraints (MPCs) para acoplamento macro-micro com Condições de Contorno Periódicas. A ferramenta foi aplicada em modelos de placa com furo, utilizando diferentes refinamentos de malha macroscópica e EVRs com 10% de inclusão. Os resultados confirmam a eficiência do script tanto na geração automática dos modelos quanto na fidelidade das soluções numéricas. Para a placa com furo em material homogêneo, o erro máximo ponto a ponto da componente de tensão na direção 𝑥1 (𝜎11) manteve-se entre 6% e 7%. Nos deslocamentos, a diferença média entre os modelos com e sem EVRs ficou abaixo de 0,06% no deslocamento vertical (𝑢2) e de 0,03% no deslocamento horizontal (𝑢1); no caso heterogêneo, mesmo com contraste de rigidez de quase três vezes, o método capturou corretamente a amplificação local de tensões sem alterar o campo global. Além disso, a automatização reduziu o tempo de préprocessamento e praticamente eliminou erros de setup, viabilizando estudos de sensibilidade e aplicações práticas do dFE2 em configurações complexas.},
keywords = {mef, ensaios},
}
Article
UV exposure analysis on mechanical resistance of rope yarns for offshore mooring
Daniel Magalhães da Cruz; Marcelo de Ávila Barreto; Larissa Basei Zangalli; Felipe Tempel Stumpf; Carlos Eduardo Marcos Guilherme; Ivan Napoleão Bastos; Ana Lúcia Nazareth da Silva
@article{cruz2025c,
title = {UV exposure analysis on mechanical resistance of rope yarns for offshore mooring},
author = {Daniel Magalhães da Cruz and Marcelo de Ávila Barreto and Larissa Basei Zangalli and Felipe Tempel Stumpf and Carlos Eduardo Marcos Guilherme and Ivan Napoleão Bastos and Ana Lúcia Nazareth da Silva},
year = {2025},
journal = {Polímeros},
volume = {35},
number = {4},
pages = {e20250043},
doi = {10.1590/0104-1428.20250044},
issn = {0104-1428},
eissn = {1678-5169},
abstract = {Polyester (polyethylene terephthalate, PET) and high-modulus polyethylene (HMPE) fibers are currently among the most commonly used materials in the manufacturing of ropes for offshore operations. Several studies have been conducted in analytical, experimental, and numerical domains, addressing various factors such as tensile tests, fatigue, creep, and environmental exposure conditions that influence their mechanical behavior. This work presents data from an experimental study on rupture resistance in semi-finished products (rope yarns) of PET and HMPE fibers subjected to different ultraviolet (UV) radiation exposure durations. The experimental procedure involved UV exposure for up to 84 days, followed by tensile rupture tests based on ISO 2062. The results showed that UV degradation occurs in a monotonic manner for PET, whereas HMPE exhibits relative stability for rope yarns.},
keywords = {mef, vibracoes},
}
Undergraduate thesis
Validação de um para-choque de acordo com critérios de impacto a baixa velocidade
Brian Hernandez Haffner
2025
Advisor: Rodrigo Rossi
Show BibTeX
@misc{haffner2025a,
title = {Validação de um para-choque de acordo com critérios de impacto a baixa velocidade},
author = {Brian Hernandez Haffner},
year = {2025},
school = {Universidade Federal do Rio Grande do Sul},
howpublished = {Trabalho de Conclusão de Curso},
keywords = {mef, ensaios},
}
Conference paper
Virtual tests of hardening porous metallic materials based on computational homogenization
Carlos Alberto da Maia; Rodrigo Rossi
Ibero-latin american congress on computational methods in engineering (46. : 2025. : Vitória) 2025
@inproceedings{maia2026a,
title = {Virtual tests of hardening porous metallic materials based on computational homogenization},
author = {Carlos Alberto da Maia and Rodrigo Rossi},
year = {2025},
booktitle = {Ibero-Latin American Congress on Computational Methods in Engineering (46. : 2025. : Vitória)},
address = {Vitória, Brasil},
doi = {10.55592/cilamce2025.v5i.14095},
issn = {2675-6269},
lume = {https://lume.ufrgs.br/handle/10183/311383},
abstract = {This study investigates the apparent mechanical strength of porous metallic materials by performing virtual tests on three-dimensional representative volume elements (RVEs). A key distinction from previous work in literature is the consideration of a hardening metallic matrix, modeled using a bounded Voce-type isotropic hardening law combined with a rate-independent \$J_2\$ isotropic hardening plasticity criterion. Each RVE features randomly distributed, non-overlapping spherical voids embedded within an elastoplastic matrix. Distinct macroscopic stress states are obtained by applying mixed boundary conditions and manipulating specific loading parameters. The macroscopic stress, derived as the average of its microscopic counterpart within the RVE, reflects a quasi-asymptotic macroscopic response. The analyses explore the influence of varying porosity levels and isotropic hardening factors, demonstrating their impact on the apparent/macroscopic yield or limit loading locus.},
keywords = {mef, ensaios},
}