|
|
| - Experimental and numerical study on the repeated low-velocity impact response and damage... . v.32, pp. 916-941. 2023. |  |
- Wood-poly(furfuryl alcohol) prepreg: A novel ecofriendly... A. P. Acosta, B. Esteves, J. A. Cruz, A. B. Aramburu, A. Kairytė, S. Członka, D. O. Ramos, M. P. Goularte, R. A. Delucis, D. A. Gatto, S. C. Amico. Materials. v.16, i.18, pp. 6237. |
|
| - On the winding pattern influence for filament wound cylinders under axial compression... E. A. W. de Menezes, T. V. Lisbôa, J. H. S. Almeida Jr., A. Spickenheuer, S. C. Amico, R. J. Marczak. Thin-Walled Structures. i. 191, pp. 111041. | |
| - Hybrid wood-glass and wood-jute-glass laminates manufactured by vacuum infusion. A. P. Acosta, R. A. Delucis, S. C. Amico. Construction and Building Materials. i. 398, pp. 132513. | |
| - A novel numerical method for stochastic study of fiber-reinforced composites with nanoparticles under impact loading. D. Ma, S. C. Amico, M. Giglio, A. Manes. International Journal of Impact Engineering. i. 180, pp. 104662. | |
| - Thermomechanical properties of imidazolium ionic liquid-modified MWCNT/carbon fiber/epoxy... B. Ghafoor, U. Farooq, H. S. Schrekker, S. C. F. Fulginiti, M. Rezasefat, A. A. X. da Silva, S. C. Amico, M. Giglio, A. Manes. Advanced Composite MaterialsAmico. Journal of Composite Materials. i. 57, n. 13. | |
- Rigid polyurethane biofoams filled with pine seed shell and yerba mate wastes. A. P. Acosta, A. Kairytė, S. Członka, K. Miedzińska, A. B. Aramburu, K. T. Barbosa, S. C. Amico, R. A. Delucis. Polymers. i.15, pp. 2194. |
|
| - Analysis of a Vacuum-Infused Carbon Fiber/Epoxy Composite Beam under 3-Point Bending... E. F. Kerche, M. L. Tonatto, L. V. da Silva, S. C. Amico. Advanced Materials Research. i.1176, pp. 131-138. | |
| - Effect of the temperature of the heat treatment of pine wood on the subsequent in situ...A. P. Acosta, R. H. Díaz, R. Beltrame, S. C. Amico, K. T. Barbosa, R. A. Delucis, D. A. Gatto. Biofuels, Bioproducts & Biorefining. i.17, pp. 499-509. | |
| - Repeated impact behaviour of inter-ply hybrid aramid/S2-glass epoxy laminates. M. Rezasefat, A. A. X. da Silva, S. C. Amico, M. Giglio, A. Manes. Thin-Walled Structures. i.186, pp. 110680. | |
| - Multi-criteria decision-making analysis and numerical simulation of the low-velocity impact... M. Rezasefat, D. Ma, A. A. X. da Silva, C. Colombo, S. C. Amico, M. Giglio, A. Manes. Composite Structures. i.312, pp. 116867. | |
| - Mechanical and hygroscopic characteristics of unidirectional jute/glass and jute/carbon hybrid laminates. A. Flores, A. A. X. da Silva, R. A. Delucis, S. C. Amico. Journal of Natural Fibers. v.20, i.1, pp. 2178586. | |
| - Vacuum infusion as a novel method to determine wood permeability. A. P. Acosta, K.T. Barbosa, A. A. X. Silva, R. A. Delucis, D. A. Gatto, S. C. Amico. European Journal of Wood and Wood Products. v.81, pp.33-44. | |
- On determination of linear viscoelastic compliance and relaxation functions for polymers in one tensile test. R. T. S. Freire, S. G. Nunes, S. C. Amico, N. J. Al-Ramahi, R. Joffe, J. Varna. Mechanics of Composite Materials. v.58, pp.765-786. |
|
| - Experimental and numerical study of the influence of pre-existing impact damage on the low-velocity impact... M. Rezasefat, A. Beligni, C. Sbarufatti, S. C. Amico, A. Manes. Materials. v.16, i.3. pp.914. | |
| - Imidazolium Ionic Liquids as Compatibilizer Agents for Microcrystalline Cellulose/Epoxy Composites... E. F. Kerche, A. Kairytė, S. Członka, V.D. da Silva, N. Salles, H. S. Schrekker, S. C. Amico. Polymers, v.15, i.2, pp.333. | |
| - Optimization of pin position and angle for Z-pin reinforced foam core sandwich structures. E. F. Kerche, A. Kairytė, S. Członka, A. A. X. Silva, M. L. P. Tonatto, F. L. Bresolin, R. A. Delucis, S. C. Amico. Materials, v.16, i.1, pp. 352. | |
| - Effect of the aramid pulp on the physicochemical, viscoelastic properties and rheokinetics of polyurethanes. J. A. da Cruz, O. Bianchi, S. C. Amico. Journal of Polymer Research, v.30, i.12. | |
| - Wood and wood-jute laminates manufactured by vacuum infusion. A. P. Acosta, A. A. X. Silva, R. A. Delucis, S. C. Amico. Journal of Building Engineering, v.64, pp.105619. | |
| - Combined hygrothermal aging and mechanical loading effect on unidirectional epoxy/glass... C. C. Angrizani, B. F. de Oliveira, N. P. Lorandi, H.L. Ornaghi Jr., S. C. Amico. Polymers and Polymer Composites, v.30. | |
| - Processing, thermal and mechanical properties of composite laminates with natural fibers prepregs. V. D. Libera Junior, L. A. Teixeira, S. C. Amico, S. M. Luz. Polymers and Polymer Composites, v.30. | |
| - The Influence of Density on the Mechanical Response of Reinforced High-Density Polyurethane Foams... E. F. Kerche, J. A. da Cruz, S. C. Amico. Journal of research updates in polymer science, v.11, pp.31-35. | |
| - Wood flour modified by poly (furfuryl alcohol) as a filler in rigid polyurethane foams... A. P. Acosta, A. B. Aramburu, R. Beltrame, D. A. Gatto, S. C. Amico, J. Labidi, R. A. Delucis. Polymers, v.14, i.24, pp.5510 | |
| - Short-beam shear fatigue behaviour of round curved pultruded composite. M. L. P. Tonatto, J. R. Tarpani, S. C. Amico. Mechanics of Advanced Materials and Structures, v.29, i.26, pp.5579-5587. | |
| - Castor oil-based polyurethane/S2 glass/aramid hybrid composites manufactured by vacuum infusion. J. A. da Cruz, E. F. Kerche, O. Bianchi, A. Manes, S. C. Amico. Polymers, v.14, i.23, pp.5150. | |
| - Production of sustainable polymeric composites using grape pomace biomass. C. Berger, B. D. Mattos, S. C. Amico, J.A. Farias, R. Coldebella, D.A. Gatto, A.L. Missio. Biomass Conversion and Biorefinery, v.12, pp.5869–5880. | |
| - Experimental Investigation of the Mechanical and Physical Properties of Glass/Jute Hybrid Laminates. T. C. Dias, A. A. X. Silva, M. L. P. Tonatto, S. C. Amico. Polymers, v.14, i.21, pp.4742. | |
| - Rigid polyurethane biofoams filled with chemically compatible fruit peels. A. P. Acosta, C. G. Otoni, A. L. Missio, S. C. Amico, R. A. Delucis. Polymers, v.14, i.21, pp.4526. | |
| - Multifunctional Characteristics Of Carbon Fibers Modified With Imidazolium Ionic Liquids. B. Ghafoor, H. Schrekker, S. C. Amico. Molecules Journal, v.27, i.20, pp.7001. | |
| - A numerical study on the influence of strain-rate in finite-discrete element simulation of the perforation... M. Rezasefat, S.C. Amico, M. Giglio, A. Manes. Polymers, v.14, i.20, pp.4279. | |
| - Composite for insole shoe assembly based on polyvinyl acetate and polyester fabric waste from the footwear industry. T. M. Conti, A. L. Catto, S. C. Amico. Polymer Composites, v.43, i.10, pp.7360-7371. | |
| - Nanocomposites of low-density polyethylene and nanocellulose: An alternative route using bleached cellulose... J. Tedesco, L. V. R. Beltrami, S. C. Amico, A. J. Zattera. Journal of Composite Materials, v.56, i.25, pp.3851-3860. | |
| - Ionic liquid-functionalized reinforcements in epoxy-based composites: A systematic review. E. F. Kerche, E. Fonseca, H .S. Schrekker, S. C. Amico. Polymer Composites, v.43, i.9, pp.5783-5801. | |
| - Does the viscoelastic behavior of fully cured epoxy depend on the thermal history during curing? S. G. Nunes, Z. Al-Maqdasi, P. Fernberg, S . C. Amico, J. Varna. Journal of Composite Materials, v.56, i.22, pp.3439-3453. | |
| - Influence of Strain-Rate Related Parameters on the Simulation of Ballistic Impact in Woven Composites. D. Ma, Z. Wang, M. Giglio, S. C. Amico, A. Manes. Composite Structures, v.300, pp.116142. | |
| - Mechanical response of sisal/glass fabrics reinforced polyester – PET foam core sandwich panels. E. F. Kerche, B. G. S. Caldas, R. F. Carvalho, S. C. Amico. Journal of Sandwich Structures and Materials, v.24, i.6, pp.1993-2009. | |
| - Surface modification of carbon fiber with imidazolium ionic liquids Composite Interfaces. B. Ghafoor, H.S. Schrekker, J. Morais, S.C. Amico. Composite Interfaces, v.29, i.8, pp.915-927. | |
| - Influence of hybridization on the mechanical and dynamic mechanical properties of aramid/s2-glass.... A. A. X. Silva, I. J. A. Silva, A. C. M. Miranda, A. Manes, S. C. Amico. Materials Today Communications, v.32, pp.104021. | |
| - Toughening epoxy resin with liquid rubber and its hybrid composites: A systematic review. R. M. Neves, H.L. Ornaghi Jr., A. J. Zattera, S. C. Amico. Journal of Polymer Research, v.29, i.340. | |
| - Hybridization effect of functionalized microcrystalline cellulose with acrylonitrile butadiene liquid rubber on epoxy... R. M. Neves, E. F. Kerche, A. J. Zattera, S. C. Amico. Journal of Composite Materials, v.56, i.18, pp.2867-2877. | |
| - Experimental study on the low-velocity impact response of inter-ply S2-glass... M. Rezasefat, A. Gonzalez-Jimenez, D. Ma, A. Vescovini, L. Lomazzi, A. A. X. da Silva, S. C. Amico, A. Manes. Thin-Walled Structures, v.177, pp.109458. | |
| - Tribological performance of eco-friendly friction materials with rice husk. G. S. Gehlen, P. D. Neis, L. Y. Barros, J. C. Poletto, N. F. Ferreira, S. C. Amico. Wear Journal, v.500-501, pp.204374. | |
- Accelerated ageing effects on short-beam strength behavior of pultruded CFRP rods. L. V. da Silva, E. A. W. de Menezes, J. R. Tarpani, S. C. Amico. Applied Composite Materials, v.29, pp.885-869 |
|
| - Grafting amount and structural characteristics of microcrystalline cellulose functionalized with different... R. M. Neves, H. L. Ornaghi Jr, B. Duchemin, A. J. Zattera, S. C. Amico. Cellulose, v.29, pp.3209-3224 | |
| - FEM updating for damage modeling of composite cylinders under radial compression considering... T. V. Lisbôa, J. H. S. Almeida Jr, A. Spickenheuer, M. Stommel, S. C. Amico, R. J. Marczak. Thin-Walled Structures, v.173, pp.108954 | |
- Degradation kinetics and lifetime prediction for polystyrene/nanocellulose nanocomposites. R.M. Neves, H.L. Ornaghi Jr., F.G. Ornaghi, S.C. Amico, A.J. Zattera. Journal of Thermal Analysis and Calorimetry, v.147, pp.879-890. |
|
| - Physical aging effect on viscoelastic behavior of polymers. S.G. Nunes, R. Joffe, N. Emami, P. Fernberg, S. Saseendran, A. Esposito, S.C. Amico, J. Varna. Composites Part C, v.7, pp.100223. | |
| - Experimental and numerical evaluation of the perforation resistance of multi-layered alumina/aramid fiber... R. Scazzosi, S. D. B. de Souza, S. C. Amico, M. Giglio, A. Manes. Composites Part B, v.230, pp.109488. | |
| - High-velocity impact behavior of aramid/s2-glass interply hybrid laminates. A. A. X. Silva, R. Scazzosi, A. Manes, S. C. Amico. Applied Composite Materials, v.28, pp.1899–1917. | |
- Experimental damping ratio evaluation using Hilbert transform in filament-wound composite plates. E. Costamilan, A. M. Low, M. D. F. Awruch, S. C. Amico, H. M. Gomes. Polymers & Polymers Composites, v.29, i.9, pp.S1579-S1587. |
|
| - Experimental and artificial neural network approach for prediction of dynamic-mechanical... H. L. Ornaghi, F. M. Monticeli, R. M. Neves, A. J. Zattera, S. C. Amico. Polymers and Polymer Composites, v.29, i.9, pp.S1033-S1043. | |
| - Compressive and flexural behavior of fiberglass/polyurethane sandwich panels: experimental and numerical study. D. F. Garbin, M. L. P. Tonatto, S. C. Amico. Mechanics of Composite Materials, v.57, pp.459-468. | |
- Spectroscopic analysis of chemically modified carbon fibres. A. G. O. Moraes, M. S. Haack, M. C. Rezende, S. C. Amico. Surface and Interface Analysis, v.53, i.11, pp.901-909. |
|
| - Rigid bio-based wood/polyurethane foam composites expanded under confinement. E.F. Kerche, R.A. Delucis, C.L. Petzhold, S.C. Amico. Journal of Cellular Plastics, v.57, i.5, pp.757-768. | |
| - Effect of carbonaceous nanofillers and triblock copolymers on the toughness of epoxy resin. A. Lavoratti, A.J. Zattera, S.C. Amico. Polymer Bulletin, v.78, pp.5467-5480. | |
| - Time-dependent properties of epoxy resin with imidazolium ionic liquid. E. Fonseca, V. D. da Silva, S. C. Amico, L. Pupure, R. Joffe, H. S. Schrekker. Journal of Applied Polymer Science, v.138, i.46, pp.51369. | |
| - Design, modeling, optimization, manufacturing and testing of variable-angle filament-wound cylinders. J. H. S. Almeida Jr, L. St-Pierre, Z. Wang, M. L. Ribeiro, V. Tita, S. C. Amico, S. G. P. Castro. Composites Part B, v.225, pp.109224. | |
| - Enhancing thermal and dynamic-mechanical properties of epoxy reinforced by amino-functionalized microcrystalline... R. M. Neves, A. J. Zattera, S. C. Amico. Journal of Applied Polymer Science, v.138, i.45, pp.51329. | |
| - Numerical investigation on the hybridization effect in inter-ply S2-glass and aramid woven... A. Vescovini, L. Balen, R. Scazzosi, A. A. X. da Silva, S. C. Amico, M. Giglio, A. Manes. Composite Structures, v.276, pp.114506. | |
| - Fast-growing pine wood modified by a two-step treatment based on heating and in situ polymerization of... A. P. Acosta, R. A. Delucis, S. C. Amico, D. A. Gatto. Construction and Building Materials, v.302, i.4, pp.124422. | |
| - Modeling of the resin transfer molding process including viscosity dependence with time and temperature. L.L. Soares, S.C. Amico, L.A. Isoldi, J.A. Souza. Polymer Composites, v.44, i.6, pp.2795-2807. | |
| - Evaluation of flow-mesh influence in resin injection processes. C. Bulsing, J.A. Souza, S.C. Amico. Applied Composite Materials, v.28, pp.369-380. | |
| - Epoxy-based composites reinforced with imidazolium ionic liquid-treated aramid pulp. E. F. Kerche, V. D. da Silva, E. Fonseca, N. A. Salles, H. S. Schrekker, S. C. Amico. Polymer, v.226, pp.123787. | |
| - EPDM with biochar, carbon black, aramid pulp and ionic liquid-compatibilized aramid pulp. V.D. Silva, M.D. Ferrari, R.N. Brandalise, E.V. Benvenutti, H.S. Schrekker, S.C. Amico. Fibers and Polymers, v.22, i.24, pp.1180-1188. | |
| - Microfibrillated cellulose reinforced bio-based rigid high-density polyurethane foams. E.F. Kerche, D. N. Bock, R.A. Delucis, W.S. Magalhães, S.C. Amico. Cellulose, v.28, pp.4313-4326. | |
| - Multiscale modelling approach for simulating low velocity impact tests of aramid-epoxy composite... D. Ma, A. G. Jimenez, M. Giglio, C. M. S. Cougo, S. C. Amico, A. Manes. Europen journal of mechanics a-solids, v.90, pp.104286. | |
- Indentation creep response and rupture mechanisms in GLARE: Experimental and statistical evaluation. M. Thirukumaran, J.T.W. Jappes, I. Siva, S.A. Kumar, S.C. Amico. Journal of Testing and Evaluation, v.49, i.2, pp.1853. |
|
| - Improvement in mechanical, physical and biological properties of eucalyptus and pine woods by... A. P. Acosta, K. T. Barbosa, S. C. Amico, A. L. Missio, R. A. Delucis, D. A. Gatto. Industrial Crops and Products, v.166, pp.113495. | |
| - Cement composites reinforced with TEOS-treated wood fibres. A.B. Tessaro, R.A. Delucis, D.A. Gatto, S.C. Amico, M.R.F. Gonçalves. Cellulose Chemistry and Technology, v.55, i.1-2, pp.141-147. | |
| - Numerical-experimental structural instability analysis of composite tubes considering manufacturing parameters and imperfections. E. Gerhardt, R.J. Marczak, S.C. Amico. Polymer Composites, v. 42, i.3, pp.1530-1542. | |
- In situ L-RTM manufacturing of sandwich panels with PET foam core reinforced by polymeric pins. R.A. Delucis, M.L.P. Tonatto, R.S. Trindade, S.C. Amico. Journal of Sandwich Structures and Materials, v.23, i.1. pp.241-254. |
|
|
|
| - Creep and residual properties of filament wound composite rings under radial compression in harsh environments. F. Eggers, J.H.S. Almeida Jr, T.V. Lisbôa, S.C. Amico . Polymers, v.13, i.1, pp.33. | |
| - Recent studies on modified cellulose/nanocellulose epoxy composites: A systematic review. R.M. Neves, H.L. Ornaghi Jr, A.J. Zattera, S.C. Amico. Carbohydrate Polymers, v.255, pp.117366. | |
| - Aramid pulp treated with imidazolium ionic liquids as filler in rigid... E.F. Kerche, V.D. Silva, G.S. Jankee, H.S. Schrekker, R.A. Delucis, S. Irulappasamy, S.C. Amico. Journal of Applied Polymer Science, v.138, i.21. pp.50492. | |
|
|
| - The influence of silane surface modification on microcrystalline cellulose characteristics. R.M. Neves, H.L. Ornaghi Jr., A.J. Zattera, S.C. Amico. Carbohydrate Polymers, v.230, pp.115595. | |
| - Tribological behavior of glass/sisal fiber reinforced polyester composites. G.S. Gehlen, P.D. Neis, L.Y. Barros, J.C. Poletto, M. Ebeling, i.F. Ferreira, S.C. Amico, C.C. Angrizani. Polymer Composites, v.41, i.1, pp.112-120. | |
| - Aramid pulp reinforced hydrogenated nitrile butadiene rubber... V.D. Silva, I.R. Barros, D.K.S. Conceição, K.N. Almeida, H.S. Schrekker, S.C. Amico, M.M. Jacobi. Journal of Applied Polymer Science, v.137, i.20, pp.48702. | |
| - Multi-component nanocomposites of epoxy/silsesquioxane reinforced with carbon fibers and carbon nanotubes... M.A. Farias, S.C. Amico, L.A.F. Coelho, S.H. Pezzin. Polymer-Plastics Technology and Materials, v.59, i.5, pp.517-526. | |
| - Optimum slippage dependent, non-geodesic fiber path determination for a filament wound composite nozzle. I.H. Dalibor, T.V. Lisboa, R.J. Marczak, S.C. Amico. European Journal of Mechanics - A Solids, v.82, pp.103994. | |
| - Dynamic-mechanical properties as a function of luffa fibre content and adhesion in a polyester composite. I. Siva, K. Raman, C.P. Selvan, Y. Munde, A.K. Subramaniyan, S.C. Amico. Polymer Testing, v.87, pp.106538. | |
| - Imidazolium ionic liquids as fracture toughening agents in DGEBA-TETA epoxy resin. E. Fonseca, V.D. Silva, J.S. Klitzke, H.S. Schrekker, S.C.Amico. Polymer Testing, v.87, pp.106556. | |
| - Lightweight composites through imidazolium ionic liquid enhanced aramid–epoxy resin... C.V. Moraes, V.D. Silva, M. Castegnaro,J. Morais, H.S. Schrekker, S.C. Amico. ACS Applied Polymer Materials, v.2, i.5, pp.1754-1763. | |
| - The role of winding pattern on filament wound composite cylinders under radial compression. T.V. Lisboa, I.H. Dalibor, J.H.S. Almeida Jr, A. Spickenheuer, R.J. Marczak, S.C. Amico. Polymer Composites, v.41, i.6. pp.2446-2454. | |
| - Numerical analysis of the influence of empty channels design over performance of resin... G.M.C. Magalhães, C. Fragassa, R.L. Lemos, L.A. Isoldi, S.C. Amico, L.A.O. Rocha, J.A. Souza, E.D. Santos. Applied Sciences, v.10, i.11, pp.4054. | |
| - Tribological investigation on nano-graphene and curauá filled three-phase polymer composites. C.P. Selvan, I. Siva, A. Shinde, S.C. Amico. Materials Today: Proceedings, v.28, i.1, pp.172-176. | |
| - Basalt fiber hybridization effects on the thermal degradation properties of curauá fiber composites. T. Premkumar, I. Siva, Y. Munde, S. Rajesh, S.C Amico. Materials Today: Proceedings, v.28, i.1, pp.258-260 . | |
| - Influence of mosaic pattern on hygrothermally-aged filament wound composite cylinders under... C.B. Azevedo, J.H.S. Almeida Jr., H.F. Flores, F. Eggers, S.C. Amico. Journal of Composite Materials, v.54, i.19, pp.2651-2659. | |
| - Composite spirals and rings under flexural loading: Experimental and numerical analysis. M.L.P. Tonatto, V. Tita, S.C. Amico. Journal of Composite Materials, v.54, i.20, pp.2697-2705. | |
| - Hybrid composites: Experimental, numerical and analytical assessment aided by online software. E.A.W. Menezes, F. Eggers, I. Iturrioz, R.J. Marczak, S.C. Amico. Mechanics of Materials, v.148, pp.103533. | |
| - In-plane permeability and mechanical properties of R-glass/aramid hybrid composites. A.A.X. Silva, J.A. Souza, A. Manes, S.C. Amico. Journal of Materials Engineering and Performance, v.29, pp.4484–4492. | |
| - Polyester/paper composites: Study of manufacturing techniques for product development. J.S. Porto, C.C. Angrizani, E.P. Calegari, S.C. Amico, L.C. Duarte. Materia, v.25, i.3, pp.e-12822. | |
| - Reaproveitamento de resíduo de placas de circuito impresso como cargas em compósitos de polipropileno. E.L. Schneider, G.D. Grassi, S.C. Amico, R.A. Chaves, D.C. Mazzuca, L.C. Robinson. Materia, v.25, i.3, pp.12832. | |
| - Production and characterization of cellulose nanocrystals/ acrylonitrile... R.M. Leão, L.C.C. Jesus, P.T. Bertuoli, A.J. Zattera, J.M.L.L. Maia, C.H.S. Menezzi, S.C. Amico, S.M. Luz. Journal of Composite Materials, v.54, i.27, pp.4207-4214. | |
| - Curing and seawater aging effects on mech physical properanical andties of glass/epoxy filament wound cylinders. M.B. Antunes, H. Almeida Jr, S.C. Amico. Composites Communications, v.22, pp.100517. | |
| - Inter and intralayer basalt hybrid effects on the static and vibrational behavior of Brazilian curauá/basalt hybrid composite. T. Premkumar, I. Siva, S.C Amico. Materials today: Proceedings, v.33, i.1, pp.1212-121. | |
| - On temperature-related shift factors and master curves in viscoelastic constitutive models for... S.G. Nunes, S. Saseendran, R. Joffe, S. C. Amico, P. Fernberg, J. Varna. Mechanics of Composite Materials, v.56, i.5, pp.573-590. | |
| - Analytical and numerical modelling of high-velocity impact on multilayer alumina/aramid fibre composite... D. Gregori, R. Scazzosi, S.G. Nunes, S.C. Amico, M. Giglio, A. Manes. Composites Part B: Engineering. v.187, pp. 107830. | |
|
|
| - Investigation to appraise the abrasive water jet response of curaua/basalt hybrid... I. Siva, T. Premkumar, S. Rajesh, J.T.W. Jappes, S.C. Amico. Int J of Manufacturing, Materials, and Mechanical Engineering, v.9, i.1, pp.13-29. | |
| - The effect of thickness on vacuum infusion processing of aramid/epoxy composites for ballistic application. S.G. Nunes, W.F. Amorim Jr, A. Manes, S.C. Amico. Journal of Composite Materials, v.53, i.3, pp.383-391. | |
| - CaCO3 particle-filled polymer composite manufacturing via RTM process: An experimental... I.R. Oliveira, J.V. Silva, E.M.A. Pereira, S.C. Amico, A.G.B. Lima, D.C.M. Cavalcante. Defect and Diffusion Forum, v.391, pp.30-35. | |
| - Effect of silane treatment on the curaua fibre/polyester interface. A.M. Brum da Silva, S. M. da Luz, I. Siva, J. T. W. Jappes, S. C. Amico. Plastics, Rubber and Composites, v.48, i.4, pp.160-167. | |
| - Experimental evaluation of temperature effect on the transverse permeability of a fibrous preform. E. Kerche, R.S. Trindade, A.C. Ribeiro, J.A. Souza, S.C. Amico.Materials Today: Proceedings, v.8, i.3, pp.731-737. | |
| - Estudo numérico do processo de infusão de resina líquida (lRI) utilizando malha de fluxo. C.M.B. Dutra, R.S. Trindade, S.G. Nunes, S.C. Amico, J.A. Souza. Revista Interdisciplinar de Pesquisa em Engenharia, v.5, i.1, pp.41-48. | |
| - Determinação numérico-experimental da permeabilidade transversal em problemas de RTM. C.P. Oliveira, R.S. Trindade, L.G.G. Reichwald, S.C. Amico, J.A. Souza. Revista Cereus, v.11, i.1, pp.81-95. | |
| - The effect of fluorination of aramid fibers on vinyl ester resin composites. M. Wirti, G.R. Biondo, D. Romanzini, S.C. Amico, A.J. Zattera. Polymer Composites, v.40, i.5, pp.2095-2102. | |
| - Low velocity impact response of R-glass/epoxy composites... A. González-Jiménez, L.E. Caldeira, R. Scazzosi, A. Manes, S.C. Amico, M. Giglio. Multiscale and Multidisciplinary Modeling, Experiments and Design, v.2, i.2, pp.89-96. | |
| - Development of multilaminar composites for vehicular ballistic protection using... L.F. Silva, A. Lavoratti, I.M. Pereira, R.R. Dias, S.C. Amico, A.J. Zattera. Journal of Composite Materials, v.53, i.14, pp.1907-1916. | |
| - Mechanical, electrical and electromagnetic properties of hybrid graphene/glass fiber/epoxy composite. K. Kunrath, E.F. Kerche, M.C. Rezende, S.C. Amico.Polymers & Polymer Composites, v.27, i.5, pp.262-267. | |
| - Mechanical and dynamic-mechanical properties of silanized graphene oxide/epoxy composites. A. Lavoratti, A.J. Zattera, S.C. Amico. Journal of Polymer Research, v.26, i.6, pp.140. | |
| - Imidazolium ionic liquid compatibilizers in melt-blended styrene-butadiene rubber-aramid pulp composites. V.D. Silva, M.M. Jacobi, H.S. Schrekker, S.C. Amico. Polymer Bulletin, v.76, i.7, pp.3451–3462. | |
| - Evaluación del desempeño de microesferas de vidrio huecas aplicadas en compuestos elastoméricos. L. Heinemann, K.J.S. Brito, S.C. Amico. SLT Caucho, v.31, pp.4-11. | |
| - Influence of projectile and thickness on the ballistic behavior of aramid composites:... S.G. Nunes, R. Scazzosi, A. Manes, S.C. Amico, W.F. Amorim Jr, M. Giglio. International Journal of Impact Engineering, v.132, pp.103307. | |
| - Mechanical response of filament wound composite rings under tension and compression. F. Eggers, J.H.S. Almeida Jr, C.B. Azevedo, S.C. Amico. Polymer Testing, v.78, pp.105951. | |
| - Surface response and photodegradation performance of bio-based polyurethane-forest derivatives foam composites. R.A. Delucis, E.F. Kerche, W.L.M. Esteves, C.L. Petzhold, S.C. Amico. Polymer Testing, v.80, pp.106102. | |
| - Comportamento térmico de compósitos de poliestireno reciclado reforçado com celulose de bagaço de cana. L.C.C. Jesus, S.M. Luz, R.M. Leão, A.J. Zattera, S.C. Amico. Materia, v.24, i.3, pp.e-12421. | |
| - Fatigue damage and life prediction of a carbon/epoxy cross ply laminate aged by hygrothermal exposure. A.P.P. Fulco, A.M. Medeiros, M.L.P. Tonatto, S.C. Amico, R. Talreja, J.D.D. Melo. Composites Part A, v.127, pp.105628. | |
| - Experimental investigation of transverse permeability applied to liquid molding. R.S. Trindade, A.C. Ribeiro, J.A. Souza, S.C. Amico. Polymer Composites, v.40, i.10, pp.3938-3946. | |
| - A geometric approach for filament winding pattern generation and study of the... I.H. Dalibor, T.V .Lisboa, R.J. Marczak, S.C. Amico. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v.41, pp.576. | |
| - Experimental design and theoretical analysis on the various tribological responses of... T. Premkumar, I. Siva, P.D. Neis, S.C. Amico, i.F. Ferreira , J.T.W. Jappes. Materials Research Express, v.6, i.12, pp.125337. | |
| - Zinc oxide nanoparticles from microwave-assisted solvothermal process: Photocatalytic performance and use for wood... M.L. Peres, R.A. Delucis, S.C. Amico, D.A. Gatto. Nanomaterials and Nanotechnology, v.9, pp.1-8. | |
| - Validação de dois modelos numéricos (axissimétrico e tridimensional) para solução de... C.P. Oliveira, L.G.G. Reichwald, S.C. Amico, J.A. Souza. Revista Mundi Engenharia, Tecnologia e Gestão, v.4, i.6, pp.1-22. | |
| - Dry sliding wear of intra-layer curaua/basalt polyester composites... T. Premkumar, I. Siva, S.C. Amico, J.T.W. Jappes. International Journal of Innovative Technology and Exploring Engineering, v.9, i.2S2, pp.331-333. | |
| - Abrasive jet machining performance of vegetable fiber polyester composite and its modelling. T. Premkumar, I. Siva, S.C. Amico. International Journal of Recent Technology and Engineering, v.8, i.4S4, pp.260-263. | |
| - Analysis and targeting of waste paper/polyester composites after weathering. J. P. Smidt, C. C. Angrizani,E. P. Calegari, S. C. Amico, L. C. Duarte. Product Management & Development, v. 17, p. 140-145. | |
|
|
| - Mechanical and ballistic analysis of aramid/vinyl ester composites. M. Pagnoncelli, V. Piroli, D. Romanzini, I.M. Pereira, R.R. Dias, S.C. Amico, A.J. Zattera. Journal of Composite Materials, v.52, i.3, pp.289-299. | |
| - Fibre loading effects on dynamic mechanical properties of compression molded... G. Kalusuraman, I. Siva, J.T.W. Jappes, X-Z. Gao, S.C. Amico. Int. J. Computer Aided Engineering and Technology, v.10, i.1/2, pp.157-165. | |
| - Metallic and composite cables: A brief review. E.A.W. Menezes, L.V. Silva, F.F. Luz, C.A. Cimini Jr., S.C. Amico. International Journal Computer Aided Engineering and Technology, v.10, i.1/2, pp.179-191. | |
| - Carbon/epoxy filament wound composite drive shafts under torsion and compression. P. Stedile Filho, J.H.S. Almeida Jr, S.C. Amico. Journal of Composite Materials, v.52, i.8, pp.1103-1111. | |
| - Multi-scale analyses of a floating marine hose with hybrid polyaramid/polyamide reinforcement cords. M.L.P. Tonatto, V. Tita, M.M.C. Forte, S.C. Amico. Marine Structures, v.60, pp.279–292. | |
| - Strength analysis of composite cables. F.F. Luz, E.W. Menezes, L.V. Silva, C.A. Cimini Jr., S.C. Amico. Latin American Journal of Solids and Structures, v.15, i.4, pp.e33. | |
| - Investigation of margin effect to minimize delamination during drilling of differently... M. Thirukumaran, I. Siva, J.T.W. Jappes, S.C. Amico, J.P. Davim. Journal of Manufacturing Technology Research, v.10, i.1-2. | |
| - Buckling and post-buckling of filament wound composite tubes under axial compression: linear, nonlinear... J.H.S. Almeida Jr., M.P. Tonatto, M.L. Ribeiro, V. Tita, S.C. Amico. Composites Part B, v.149, pp.227-239. | |
| - Aramid pulp with physisorbed imidazolium ionic liquids for solvent-casted enhanced styrene-butadiene rubber... V.D. Silva, M.M. Jacobi, H.S. Schrekker, S.C. Amico. Journal of Applied Polymer Science, v.135, i.36, pp.46693. | |
| - Thermal and combustion features of rigid polyurethane biofoams filled with four forest-based wastes. R.A. Delucis, W.L.E. Magalhães, C.L. Petzhold, S.C. Amico. Polymer Composites, v.39, i.S3, pp.E1770-E1777. | |
| - Hemicellulose removal in curaua (Ananas erectifolius) fibers for polyester composites. B.S. Rodrigues, R.M. Garcia, R.M. Leão, S.C. Amico, S.M. Luz. Nova Scientia, v.10, i.2, pp.154-172. | |
| - Compatibilization and mechanical properties of compression-molded... F.B. Mello, S.M.B. Nachtigall, C.A. Salles, S.C. Amico. Progress in Rubber, Plastics & Recycling Technology, v.34, i.3, pp.117-127. | |
| - Mechanical and dynamic-mechanical properties of silane treated graphite nanoplatelet/epoxy composites. A. Lavoratti, A.J. Zattera, S.C. Amico. Journal of Applied Polymer Science, v.135, i.45, pp.46724. | |
| - On creep/recovery and stress relaxation of carbon/epoxy filament wound composites:... J.H.S. Almeida Jr., H. L. Ornaghi Jr., i. Lorandi, G. Marinucci, S.C. Amico. Polymer Engineering and Science, v.58, i.10, pp.1837-1842. | |
| - Study of delamination factors on the abrasive water-jet drilling of fibre metal laminates... T. Manoharan, W.J.J. Thangaiah, S. Irulappasamy, S. DharMalingam, S.C. Amico. Defence S&T Technical Bulletin, v.11, i.2, pp.248-258. | |
| - Creep and interfacial behavior of carbon fiber reinforced epoxy filament wound laminates. J.H.S. Almeida Jr., H.L. Ornaghi Jr, i.P Lorandi, B.P. Bregolin, S.C. Amico. Polymer Composites, v.39, i.54. pp. E2199-E2206. | |
| - Numerical analysis of carbon fiber cables under tensile and bending loading. F.F. Luz, E.W. Menezes, C.A. Cimini Jr., S.C. Amico. International Journal of Offshore and Polar Engineering, v.28, i.4, pp.387–392. | |
|
|
| - Parametric analysis of an offloading hose under internal pressure via computational modeling. M.L.P. Tonatto, V. Tita, R.T. Araujo, M.M.C. Forte, S.C. Amico. Marine Structures, v.51, pp.174-187. | |
| - Effect of sonication and clay content on the properties of unsaturated polyester/montmorillonite nanocomposites.D. Romanzini, A.A. Silva, B.G. Soares, A.J. Zattera, S.C. Amico. Journal of Composite Materials, v.51, i.2, pp.187-197. | |
| - Thermal and mechanical investigation of interlaminate glass/curaua hybrid polymer composites. C.C. Angrizani, H.L. Ornaghi Jr, A.J. Zattera, S.C. Amico. Journal of Natural Fibers, v.14. i.2, pp.271-277. | |
| - Study of composites produced with recovered polypropylene and piassava fiber. S.G. Nunes, L.V. Silva, S.C. Amico, J.D. Viana, F.D.R. Amado. Materials Research, v.20, i.1, pp.144-150. | |
| - Effect of starch treatment and hybridisation on the mechanical properties of natural fibre... G. Kalusuraman, I. Siva, J.T.W. Jappes, S.C. Amico. Int. J. Computer Aided Engineering and Technology, v.9, i.2, pp.261-269. | |
| - Hollow glass microspheres/piassava fiber-reinforced homo- and co-polypropylene composites: Preparation and properties. T.E. Borges, J.H.S. Almeida Jr., S.C. Amico, F.D.R. Amado. Polymer Bulletin, v.74, i.6, pp.1979–1993. | |
| - Influence of fibre treatment on the characteristics of buriti and ramie polyester composites. A. Lavoratti, D. Romanzini, S.C. Amico, A.J. Zattera. Polymers & Polymer Composites, v.25, i.4, pp.247-255. | |
| - Modelagem numérica da infusão de resina em um meio poroso. L.L. Soares, J.A. Souza, L.A. Isoldi, E.D. Santos, S.C. Amico, R.S. Trindade. RETEC, Ourinhos, v.10, i.1, pp.75-87. | |
| - Compressive-tensile fatigue behavior of cords/rubber composites. M.L.P. Tonatto, M.M.C. Forte, S.C. Amico. Polymer Testing, v.61, pp.185-190. | |
| - Reuse of waste paper and rice hulls as filler in polymeric matrix composites. E.P. Calegari, J.S. Porto, C.C. Angrizani, B.F. Oliveira, L.C. Duarte, S.C. Amico. Materia, v.22, i.2, pp.e11846. | |
| - Transverse permeability determination and influence in resin flow through an orthotropic medium in the RTM process. F.V. Härter, J.A. Souza, L.A. Isoldi, E.D. dos Santos, S.C. Amico. Materia, v.22, i.2, pp.e11851. | |
| - Stacking sequence optimization in composite tubes under internal pressure based on genetic algorithm accounting for progressive damage. J.H.S. Almeida Jr., M.L. Ribeiro, V. Tita, S.C. Amico. Composite Structures, v.178, pp.20-26. | |
| - Numerical model updating applied to the simulation of carbon fiber–reinforced polymer... E.A.W. Menezes, L.V. Silva, R. Marckzak, S.C. Amico. Journal of Strain Analysis for Engineering Design, v.52, i.6, pp.356-364. | |
| - Uso de software acadêmico Mech-Gcomp para ensino de compósitos particulados. C.C. Angrizani, E.A.W. Menezes, F.F. Luz, A.A. Muller, S.C. Amico. Revista de Ensino de Engenharia, v.36, i.1, pp.13-23. | |
| - Thermal and fire retardancy studies of clay-modified unsaturated polyester/glass fiber composites. D. Romanzini, F. Cuttica, A. Frache, A.J. Zattera, S.C. Amico. Polymer Composites, v.38, i.12, pp.2743-2752. | |
| - Numerical and experimental analysis of the tensile and bending behavior of CFRP cables. E.A.W. Menezes, L.V. Silva, C.A. Cimini Jr., F.F. Luz, S.C. Amico. Polymers & Polymer Composites, v.25, i.9, pp.643-650. | |
| - Comparative study between four fast-growing eucalypt woods by natural weathering. R.A. Delucis, R.H. Diaz, S.C. Amico, J. Labidi, D.A. Gatto. Cellulose Chemistry and Technology, v.51, i.9-10, pp.889-898. | |
| - Solução numérica para RTM utilizando o openfoam. C. M. B. Dutra, C. P. Oliveira, S. C. Amico, J. A. Souza. Revista Mundi Engenharia, Tecnologia e Gestão, v.1, i.2, pp.1-11. | |
|
|
| - Geometrical evaluation of a resin infusion process... G.M.C. Magalhães, G. Lorenzini, M.G. Nardi, S.C. Amico, L.A. Isoldi, L.A.O. Rocha, J.A. Souza, E.D. Santos. International Journal of Heat and Technology, v.34, i.1, pp.S101-108. | |
| - Evaluation of mechanical properties of sandwich structures with polyethylene terephthalate and polyvinyl chloride core. A.C. Garay, J.A. Souza, S.C. Amico. Journal of Sandwich Structures and Materials, v.18, i.2, pp.229-241. | |
| - Damage and failure in carbon/epoxy filament wound composite tubes under external pressure: Experimental ... J.H.S. Almeida Jr., V. Tita, M.L Ribeiro, S.C. Amico. Materials and Design, v.96, pp.431–438. | |
| - Carbon fiber reinforced epoxy filament wound composite laminates exposed to hygrothermal conditioning. J.H.S. Almeida Jr., S.D.B. Souza, E.C. Botelho, S.C. Amico. Journal of Materials Science, v.51, i.9, pp.4697-4708. | |
| - Synthesis and performance of palladium-based electrocatalysts... L.P.R. Moraes, B.R. Matos, C. Radtke, E.I. Santiago, F.C. Fonseca, S.C. Amico, C.F. Malfatti. International Journal of Hydrogen Energy, v.41, i.15, pp.6457-6468. | |
| - Influence of stacking sequence on the mechanical and dynamic mechanical properties of cotton/glass fiber... E.H. Portella, D. Romanzini, C.C. Angrizani, S.C. Amico, A.J. Zattera. Materials Research, v.19, i.3, pp.542-547. | |
| - Dynamic mechanical properties and the dynamic fragility concept applied to vegetal... H.L. Ornaghi Jr, M. Poletto, F.G. Ornaghi, A.J. Zattera, S.C. Amico. Journal of Composite Materials, v.50, i.18, pp.2469-2475. | |
| - Progressive damage modeling of spiral and ring composite structures for offloading hoses. M.L.P. Tonatto, M.M.C. Forte, V. Tita, S.C Amico. Materials and Design, v.108, pp.374-382. | |
| - Glass fiber/carbon nanotubes/epoxy three-component composites as radar absorbing materials. L.V. Silva, S.H. Pezzin, M.C. Rezende, S.C. Amico. Polymer Composites, v.37, i.8, pp.2277–2284. | |
| - Functionalized-carbon nanotubes with physisorbed... A.C. Kleinschmidt, J.H.S. Almeida Jr, R.K. Donato, H.S. Schrekker, V.C. Marques, E.J. Corat, S.C. Amico. Journal of Nanoscience and Nanotechnology, v.16, i.9, pp.9132-9140. | |
| - Ageing effect on the tensile behavior of pultruded CFRP rods. L.V. Silva, F.W. Silva, J.R. Tarpani, M.M.C. Forte, S.C. Amico. Materials and Design, v.110, pp.245-254. | |
| - Effect of inter-laminar fibre orientation on the tensile properties of sisal fibre reinforced... K. Senthilkumar, I. Siva, J.T.W. Jappes, S.C. Amico, F. Cardona, M.T.H. Sultan. Materials Science and Engineering, v.152, pp.012055. | |
| - Chemical composition, tensile properties, and structural characterization of the buriti fiber. H.L. Ornaghi Jr, A.G.O. Moraes, M. Poletto, A.J. Zattera, S.C. Amico. Cellulose Chemistry and Technology, v.50, i.1, pp.15-22. | |
| - Biocarbons for energy conversion and storage: DEFCs and supercapacitors... A. Cuna, E.L. Silva, M.R.Ortega, C. Radtke, N. Tancredi, S.C. Amico, C.F. Malfatti. Renewable Energy & Power Quality Journal, i.14, pp.1-6. | |
| - Solução numérica para RTM utilizando o openfoam. C.M.B. Dutra, C.P. Oliveira, S.C. Amico, J.A. Souza. Revista Mundi Engenharia, Tecnologia e Gestão, v.1, i.2, pp.1-11. | |
|
|
| - Effect of fiber orientation on the shear behavior of glass fiber/epoxy composites. J.H.S. Almeida Jr., C.C. Angrizani, E.C. Botelho, S.C. Amico. Materials and Design, v.65, pp.789-795. | |
| - Application of calcium carbonate in resin transfer molding process: An experimental investigation. I.R. Oliveira, S.C. Amico, A.G.B. Lima, W.M.P.B. Lima. Materialwissenschaft und Werkstofftechnik, v.46, i.1, pp.24–32. | |
| - Effect of the stacking sequence on vibrational behavior of sansevieria cylindrica/coconut... C. Bennet, N. Rajini, J.T.W. Jappes, I. Siva, V.S. Sreenivasan, S.C. Amico. Journal of Reinforced Plastics and Composites, v.34, i.4, pp.293-306. | |
| - Análise numérica da pressão de ruptura de tubos à base de borracha e cordonéis poliméricos. M.L.P. Tonatto, M.M.C. Forte, S.C. Amico, P.B. Roese, R. Teles. Polímeros, v.25, i.1, pp.109-116. | |
| - Studies on thermal and viscoelastic properties of vinyl ester resin and its composites with glass fiber. A.C.Garay, L.T. Paese, J.A. Souza, S.C. Amico. Matéria, v.20, i.1, pp.64-71. | |
| - Effect of curing temperature and layering pattern on performance studies: A novel hybrid composite. C. Bennet, N. Rajini, I. Siva, J.T.W. Jappes, S.C. Amico. Journal of Polymer Engineering, v.35, i.2, pp.127-134. | |
| - Numerical analysis of the resin transfer molding process via PAM-RTM software. I.R. Oliveira, S.C Amico, J.A. Souza, A.G.B. Lima. Defect and Diffusion Forum, v.365, pp.88-93. | |
| - Avaliação das características da resina epóxi com diferentes aditivos desaerantes. A. Oliveira, C.M. Becker, S.C. Amico. Polímeros, v.25, i.2, pp.186-191. | |
| - Sodium montmorillonite modified with methacryloxy and vinylsilanes: Influence of silylation on the... D. Romanzini, V. Piroli, A. Frache, A.J. Zattera, S.C. Amico. Applied Clay Science, v.114, pp.550-557. | |
| - Evaluation of the durability performance of glass-fiber reinforcement epoxy composites... C.C. Angrizani, B.F. Oliveira, S.C. Amico. J. of Materials Science and Engineering with Advanced Technology, v.11, i.2, pp.31-47. | |
| - Numerical analysis of a sandwich composite using openfoam software. A.C. Garay, M. Franz, J.A. Souza, S.C. Amico. J. of Materials Science and Engineering with Advanced Technology, v.11, i.2, pp.49-67. | |
| - Effect of clay silylation on curing and mechanical and thermal properties of unsaturated polyester/montmorillonite ... D. Romanzini, A. Frache, A.J. Zattera, S.C. Amico Journal of Phisics and Chemistry of Solids, v.87, pp.9-15. | |
| - Tribology of composites produced with recycled GFRP waste. J.R. Souza, R.C.L. Silva, L.V. Silva, J.T.N. Medeiros, S.C. Amico, W. Brostow. Journal of Composite Materials, v.49, i.23, pp.2849-285. | |
| - Propriedades mecânicas de compósitos de poliestireno reforçado com celulose de bagaço de cana. L.C.C. Jesus, S.M. Luz, R.M. Leão, A.J. Zattera, S.C. Amico. Revista Interdisciplinar de Pesquisa em Engenharia, v.1, i.1, pp.1-14. | |
|
|
| - Correlation of the thermal stability and the decomposition kinetics of six different vegetal fibers. H.L. Ornaghi Jr, M. Poletto, A.J. Zattera, S.C. Amico. Cellulose, v.21, i.1, pp.177-188. | |
| - Thermal behavior and the compensation effect of vegetal fibers. H.L. Ornaghi Jr, A.J. Zattera, S.C. Amico. Cellulose, v.21, i.1, pp.189-201. | |
| - Analysis of curaua/glass hybrid interlayer laminates. C.C. Angrizani, M.O.H. Cioffi, A.J. Zattera, S.C. Amico. Journal of Reinforced Plastics and Composites, v.33, i.5, pp.472-478. | |
| - Processing of a LLDPE/HDPE pressure vessel liner by rotomolding. E.S. Barboza Neto, L.A.F. Coelho, M.M.C. Forte, S.C. Amico, C.A. Ferreira. Materials Research, v.17, i.1, pp.236-241. | |
| - Efeito de aditivos desaerantes nas características da epóxi e de seus compósitos com fibras de vidro. A. Oliveira, C.M. Becker, S.C. Amico. Polímeros, v.24, i.1, pp.117-122. | |
| - Mechanical behavior and correlation between dynamic fragility and dynamic mechanical... H.S.P. Silva, H.L. Ornaghi Jr, J.H.S. Almeida Jr, A.J. Zattera, S.C. Amico. Polymer Composites, v.35, i.6, pp.1078-1086. | |
| - Influência da espessura nas propriedades mecânicas de compósitos laminados híbridos curauá/vidro/poliéster. C.C. Angrizani, S.C. Amico, M.O.H. Cioffi, A.J. Zattera. Polímeros, v.24, i.2, pp.184-189. | |
| - Application of calcium carbonate in resin transfer molding process. I.R. Oliveira, S.C. Amico, R. Barcella, A.G.B. Lima. Defect and Diffusion Forum, v.353, pp.39-43. | |
| - Resin transfer molding process: A numerical analysis. I.R. Oliveira, S.C. Amico, J.A. Souza, A.G.B. Lima. Defect and Diffusion Forum, v.353, pp.44-49. | |
| - Sponge gourd (Luffa Cylindrica) reinforced polyester composites: Preparation and properties. V.O.A. Tanobe, T.H.D. Sydenstricker, S.C. Amico, G.I.B. Muniz, K.G. Satyanarayana. Defence Science Journal, v.64, i.3, pp.273-280. | |
| -"Unrolling" multi-walled carbon nanotubes with ionic liquids: Application as fillers in...A.C. Kleinschmidt, R.K. Donato, M. Perchacz, H. Beneš, V. Štengl, S.C. Amico, H.S. Schrekker. RSC Advances, v.4, i.82, pp.43436-43443. | |
| - Investigation of cure kinetics in epoxy/multiwalled carbon nanotube nanocomposites. S.B. Susin, V. Pistor, S.C. Amico, L.A.F. Coelho, S.H. Pezzin, A.J. Zattera. Journal of Applied Polymer Science, v.131, i.3, pp.39857. | |
| - Load sharing ability of the liner in type III composite pressure vessels under internal pressure. J.H.S. Almeida Jr., H. Faria, A.T. Marques, S.C. Amico. Journal of Reinforced Plastics and Composites, v.33, i.24, pp.2274-2286. | |
| - Zinc layered hydroxide salts: intercalation and incorporation into low-density polyethylene. S. Jaerger, A. Zimmermann, S.F. Zawadzki, S.C. Amico, F. Wypych. Polímeros, v.24, i.6, pp.673-682. | |
|
|
| - Algebraic rectilinear model for multilayer resin transfer molding Injection. C.P. Oliveira, J.A. Souza, L.A. Isoldi, S.C. Amico. Journal of Reinforced Plastics and Composites, v.32, i.1, pp.3-15. | |
| - Short beam strength of curaua, sisal, glass and hybrid composites. L.V. Silva, J.H.S. Almeida Jr., C.C. Angrizani, S.C. Amico. Journal of Reinforced Plastics and Composites, v.32, pp.197–206. | |
| - Influence of fiber content on the mechanical and dynamic mechanical properties of glass/ramie polymer composites. D. Romanzini, A. Lavoratti, H.L. Ornaghi Jr., S.C. Amico, A.J. Zattera. Materials & Design, v.47, pp.9-15. | |
| - Effect of CaCO3 content in resin transfer molding process. I.R. Oliveira, S.C. Amico, F.F. Luz, R. Barcella, V.M.F. Bezerra, A.G.B. Lima. Defect and Diffusion Forum, v.334-335, pp.188-192. | |
| - Resin transfer molding process: A numerical investigation. I.R. Oliveira, S.C. Amico, J.A. Souza, F.F. Luz, R. Barcella, A.G.B. Lima. Defect and Diffusion Forum, v.334-335, pp.193-198. | |
| - Gray optimization of process parameters of surface modification of coconut sheath... I. Siva, J.T.W. Jappes, P. Pitchipoo, S.C. Amico, E.R. Nagarajan, N. Azhagesan. Journal of Polymer Engineering, v.33, i.7, pp.665–672. | |
| - Resin transfer molding process: A numerical and experimental investigation. I.R. Oliveira, S.C. Amico, J.A. Souza, A.G.B. Lima. The International Journal of Multiphysics, v.7, i.2, pp.125-136. | |
| - Nanocomposite of photocurable epoxy-acrylate resin and carbon nanotubes:... M.N. Santos, C.V. Opelt, S.H. Pezzin, S.C. Amico, C.E. Costa, J.C. Milan, F.H. Lafratta, L.A.F. Coelho. Materials Research, v.16, i.2, pp.367-374. | |
| - Glass fiber hybrid composites molded by RTM using a dispersion of carbon nanotubes/clay in epoxy. T.S. Sene, L.V. Silva, S.C. Amico, D. Becker, A.R. Manzano, L.A.F. Coelho. Materials Research, v.16, i.5, pp.1128-1133. | |
| - Compósitos de poliestireno e argila aniônica funcionalizada com... R.F. Silva, J.P.C. Zanetti, R.K. Donato, H.S. Schrekker, L. Matějka, M. Šlouf, B. Dimzoski, S.C. Amico, L.B. Canto, V.J.R.R. Pita. Polímeros, v.23, i.6, pp.778-783. | |
| - Effect of fiber volume fraction on the mechanical properties of coconut sheath/USP composite. I. Siva, J.T.W. Jappes, I. Sankar, S.C. Amico, D. Ravindran. Journal of Manufacturing Engineering, v.8, i.1, pp.60-63. | |
| - Energy conversion using Pd - based catalysts in direct ethanol fuel cell. A.M. Sheikh, P.S. Correa, E.L. Silva, I.D. Savaris, S.C. Amico, C.F. Malfatti. Renewable Energy & Power Quality Journal, i.11, pp.1-4. | |
|
|
| - Use of polyester/glass-fiber residues as fillers for composites. L.V. Silva, C.C. Angrizani, J.R. Souza, S.C. Amico, J.T.N. Medeiros. Journal of Applied Polymer Science, v.124, i.1, pp.302–310. | |
| - Comportamento mecânico e térmico de compósitos de fibra de vidro sob diferentes... J.H.S. Almeida Jr, C.C Angrizani, F.D.R. Amado, S.C. Amico. Revista Iberoamericana de Polímeros, v.13, i.1, pp.20-28. | |
| - Applying computational analysis in studies of resin transfer moulding. F.F. Luz, S.C. Amico, A.L. Cunha, E.S. Barbosa, A.G.B. Lima. Defect and Diffusion Forum, v.326-328, pp.158-163. | |
| - A Simplified mathematical model to predict PVC photodegradation in photobioreactors. C.A.D'Aquino, W. Balmant, R L L. Ribeiro, M. Munaro , J.V.C. Vargas, S.C. Amico. Polymer Testing, v.31, i.5, pp. 638–644. | |
| - The novel use of sodium borohydride as a protective agent for the chemical treatment of vegetable fibers. A.G.O. Moraes, M.R. Sierakowski, S.C. Amico. Fibers and Polymers, v.13, i.5, pp.641-646. | |
| - Dynamic mechanical properties of curaua composites. H.L. Ornaghi Jr, H.S.P. Silva, A.J. Zattera, S.C. Amico. Journal of Applied Polymer Science, v.125, pp.110–116. | |
| - Study of hybrid intralaminate curaua/glass composites. J.H.S. Almeida Jr, H.L. Ornaghi Jr, S.C. Amico, F.D.R. Amado. Materials and Design, v.42, pp.111–117. | |
| - Synergetic effect of LDH and glass fiber on the properties of two- and three-component epoxy composites. C.M. Becker, T.A. Dick, F. Wypych, H.S. Schrekker, S.C. Amico. Polymer Testing, v.31, i.6, pp.741-747. | |
| - Preparation and characterization of ramie-glass fiber reinforced polymer matrix hybrid composites. D. Romanzini, H.L. Ornaghi Jr., S.C. Amico, A.J. Zattera. Materials Research, v.15, i.3, pp.415-420. | |
| - Three-dimensional numerical modeling of RTM and LRTM Processes. L.A. Isoldi, C.P. Oliveira, L.A. Rocha, J.A. Souza, S.C. Amico. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 34, i.2, pp.105-111. | |
| - The role of oleate-functionalize... R.K. Donato, L. Luza, R.F. Silva, C.C. Moro, R. Guzatto, D. Samios, L. Matějka, B. Dimzoski, M. Slouf, S.C. Amico, H. Schrekker. Materials Science and Engineering C, v.32, i.8, pp.2396–2403. | |
| - Mechanical behavior of unidirectional curaua fiber and glass fiber composites. F.H. Oliveira, A.L. Helfer, S.C. Amico. Macromolecular Symposia, v.319, i.1, pp.83-92. | |
| - The effect of the addition of Mg-Al LDH intercalated with dodecyl sulfate on the fire retardancy properties of epoxy. C.M. Becker, T. Dick, J.T. Ramos, F. Wypych, S.C. Amico. Macromolecular Symposia, v.319, i.1, pp.129-135. | |
| - Influence of fiber hybridization on the dynamic mechanical properties of glass/ramie... D. Romanzini, H.L. Ornaghi Jr., S.C. Amico, A.J. Zattera. Journal of Reinforced Plastics and Composites, v.31, i.23, pp.1652–1661. | |
| - Study of polypropylene/ethylene-propylene-diene monomer blends reinforced with sisal fibers. C. Pigatto, J.H.S. Almeida Jr, H.L. Ornaghi Jr, A.L. Rodríguez, C.M. Mählmann, S.C. Amico. Polymer Composites, v.33, i.12, pp.2262–2270. | |
| - Sulfonation and characterization of styrene-indene copolymers for the development of proton conducting... C.M. Becker, A.B. Biagini, M.M.C. Forte, S.C. Amico, J.V.C. Vargas, D.S. Azambuja. Polímeros, v.22, i.4, pp.395-400. | |
| - Computational modeling of RTM and LRTM processes applied to complex geometries. J.S. Porto, M. Letzow, E.D. Santos, S.C. Amico, J.A. Souza, L.A. Isoldi. Engenharia Térmica, v.11, i.1-2, pp.93-99. | |
|
|
| - Natural fibers characterization by inverse gas chromatography. N. Cordeiro, C. Gouveia, A.G.O. Moraes, S.C. Amico. Carbohydrate Polymers, v.84, i.1, pp.110-117. | |
| -The effect of a sodium octacosanoate‐based nucleating agent on the crystallization of thermoplastic polyurethanes. C.P.M. Freitag, I.C. Riegel, S.H. Pezzin, M.L. Costa, S.C. Amico. Polymer Engineering & Science, v.51, i.5, pp.931–939. | |
| - Osteoblast-like cell adhesion on titanium surfaces modified by plasma nitriding. J.S.P. Silva, S.C. Amico, A.O.N Rodrigues, C.A.G. Barboza, C. Alves Jr, A.T. Croci. International Journal Oral Maxillofac Implants, v.26, i.2, pp.237-44. | |
| - Influence of small rubber particles on the environmental stress cracking of high impact polystyrene. V.G. Grassi, M.F. Dal Pizzol, M.M.C. Forte, S.C. Amico. Journal of Applied Polymer Science, v.121, i.3, pp.1697–1706. | |
| - Synthesis, characterization and evaluation of phosphorylated resins in the removal of... M.A.V. Souza, L.C. Santa Maria, M.A.S. Costa, L.C. Costa, W.S. Hui, H.C. Araujo, S.C. Amico. Polymer Bulletin, v.67, i.2, pp.237-249. | |
- Efeito da incorporação de talco nas características térmicas, mecânicas e dinâmico-mecânicas de poliuretanos termoplásticos. C.P.M. Freitag, I.C. Riegel, S.H. Pezzin, S.C. Amico. Matéria, v.16, i.1, pp.597-605. |
|
| - Study of epoxy/CNT nanocomposites prepared via dispersion in the hardener. C.E. Pizzutto, J. Suave, J. Bertholdi, S.H. Pezzin, L.A.F.Coelho, S.C. Amico. Materials Research, v.14, i.2, pp.256-263. | |
| - Experimental and numerical analysis of a LLDPE/HDPE liner for a composite pressure vessel. E.S. Barboza, M. Chludzinski1, P.B. Roese, J.S.O. Fonseca, S.C. Amico, C.A. Ferreira. Polymer Testing, v.30, i.6, pp.693-700. | |
| - Hybridization effect on the mechanical and dynamic mechanical properties of curaua composites. H.L. Ornaghi Jr, H.S.P. Silva, A.J. Zattera, S.C. Amico. Materials Science and Engineering Part A, v.528, i.24, pp.7285-7289. | |
| - Sodium borohydride as a protective agent for the alkaline treatment of sisal fibers for polymer composites. A.G.O. Moraes, M.R. Sierakowski, T.M. Abreu, S.C. Amico. Composite Interfaces, v.18, i.5, pp.407-418. | |
| - A numerical investigation of the resin flow front tracking applied to the RTM process. J.A. Souza, L.A. Rocha, S.C. Amico, J.V.C. Vargas. Materials Research, v.14, i.3, pp.345-354. | |
| - Influence of calcium carbonate on RTM and RTM light processing and properties... A.C. Garay, V. Heck, A.J. Zattera, J.A. Souza, S.C. Amico. Journal of Reinforced Plastics and Composites, v.30, i.14, pp.1213-1221. | |
| - Determinación de algunas propiedades térmicas de la fibra de paina. E. Fontana, J.H.P. Revello, S.C. Amico. Ingeniería Química, v. 494, Mayo, pp.100-103. | |
| - Comparação dos métodos VOF e FE/CV aplicados à solução de problemas de RTM. C.P. Oliveira, J.A. Souza, S.C. Amico, L.A. Isoldi, R.D. Sonaglio, Vetor, v.21, i.2, pp.22-33. | |
|
|
| - Mechanical and dilatometric properties of carboxylated-SWCNT/epoxy composites:... C.E. Pizzutto, J. Suave, J. Bertholdi, S.H. Pezzin, L.A.F. Coelho, S.C. Amico. Journal of Reinforced Plastics and Composites, v.29, i.4, pp.524-530. | |
| - Mechanical and dynamic mechanical analysis of hybrid composites molded by RTM. H.L. Ornaghi Jr, A.S. Bolner, R. Fiorio, A.J. Zattera, S.C. Amico. Journal of Applied Polymer Science, v.118, i.2, pp.887-896. | |
| - Vegetable fibers as multifunctional materials. S.C. Amico. Matéria, v.15, i.2, pp.386-395. | |
| - The optimal match of streams for maximum heat transfer from a gas fired absorption... M.V.A. Pereira, J.V.C. Vargas, S.C. Amico, J.A.R. Parise, R.S. Matos, J.C. Ordonez. ASHRAE Transactions, v.116, i.2, pp.483-493. | |
|
|
| - Evaluation of flexible post-Consumed polyurethane foams modified by polystyrene... V.O.A. Tanobe, T.H.D. Sydenstricker, S.C. Amico, J.V.C. Vargas, S.F. Zawadzki. Journal of Applied Polymer Science, v.111, i.4, pp.1842-1849. | |
| - Microwave dewaxing applied to the investment casting process. F.J.B. Brum, I. Vedana, J.A. Spim Jr, S.C. Amico. Journal of Materials Processing Technology, v.209, i.7, pp.3166-3171. | |
| - Effect of sonication on thermo-mechanical properties of epoxy nanocomposites with carboxylated-SWNT. J. Suave, L.A.F. Coelho, S.C. Amico, S.H. Pezzin. Materials Science and Engineering: A, v. 509, i.1–2, pp. 57-62. | |
| - Thermal and microestructural characterization of epoxy-infiltrated natural hydroxyapatite composite. P.B. Roese, S.C. Amico, W. Kindlein Jr. Materials Research, v.12, i.1, pp.107-111. | |
| - Interferência da lavagem de fibras sobre o desempenho do sizing nas propriedades... C.A.B. Vieira, N.M.L. Mondadore, E. Freire, S.C. Amico, A.J. Zattera. Revista Iberoamericana de Polímeros, v.10, i.4, pp.222-234. | |
| - The experimental validation of a simplified PEMFC simulation model for... L.S. Martins, J.E. Gardolinski, J.V. C. Vargas, J.C. Ordonez, S.C. Amico, M.M.C. Forte. Applied Thermal Engineering, v.29, i.14-15, pp.3036-3048. | |
| - The effect of post-consumer PET particles on the performance of flexible polyurethane foams. D. Mello, S.H. Pezzin, S.C. Amico. Polymer Testing, v.28, i.7, pp.702-708. | |
| -Permeability of hybrid reinforcements and mechanical properties of their composites molded by resin... T.M. Schmidt, T.M. Goss, S.C. Amico, C. Lekakou. Journal of Reinforced Plastics and Composites, v.28, i.23, pp.2839-2850. | |
| - Obtenção de um revestimento compósito de poliéster-uretana reforçado com alumina pela técnica de deposição por imersão sobre... F.A.L. Sánchez, F.A. Reifler, F. Clemens, S.C. Amico, C.P. Bergmann. Cerâmica, v.55, i.336, pp.379-384. | |
| - Characterization of hybrid composites produced with mats made using different methods. C.A.B. Vieira, S.B. Susin, E. Freire, S.C. Amico, A.J. Zattera. Materials Research, v.12, i.4, pp.433-436. | |
|
|
| - Effect of carbon nanotubes addition on the mechanical and thermal properties of epoxy matrices. M.R. Loos, L.A.F. Coelho, S.H. Pezzin, S.C. Amico. Materials Research, v.11, i.3, pp.347-352. | |
| - Two-dimensional control volume modeling of the resin infiltration of a porous medium with a heterogeneous permeability tensor. J.A. Souza, M.J.A. Nava, L.A.O. R.ocha, S.C. Amico. Materials Research, v.11, i.3, pp.261-268. | |
| - The matrix stiffness role on tensile and thermal properties of carbon nanotubes/epoxy composites. M.R. Loos, S.H. Pezzin, S.C. Amico, C.P. Bergmann, L.A.F. Coelho. Journal of Materials Science, v.43, i.18, pp.6064-6069. | |
| - Evaluation of multilayer thermoformed films for food packaging. A. Crippa, T.H.D. Sydenstricker, S.C. Amico. Polymer-Plastics Technology & Engineering, v.47, i.10, pp.951-955. | |
| - The effect of acetone addition on the properties of epoxy. M.R. Loos, L.A.F. Coelho, S.H. Pezzin, S.C. Amico. Polímeros, v.18, i.1, pp.76-80. | |
| - Synthesis, characterization, and bactericidal properties of... L.C. Santa Maria, J.D.C. Souza, M.R.M.P. Aguiar, S.H. Wang, J.L. Mazzei, I. Felzenszwalb, S.C. Amico. Journal of Applied Polymer Science, v.107, i.3, pp.1879-1886. | |
|
|
| - Avaliação da cortaderia selloana (capim-dos-pampas) na forma de fibras e mantas como material sorvente para o setor do petróleo. T.F. Bonetti, T.H.D. Sydenstricker, S.C. Amico. Biomassa & Energia, v.2, i.4, pp.311-317. | |
|
|
| - A two-dimensional model for simulation, control and optimization of FCC risers. J.A. Souza, J.V.C. Vargas, O.F. Von Meien, W. Martignoni, S.C. Amico. AIChE Journal, v.52, i.5, pp.1895-1905. | |
| - The effect of roughness and pre-heating of the substrate on the morphology of aluminium coatings deposited by thermal... R.S.C. Paredes, S. C. Amico, A.S.C.M. d'Oliveira. Surface and Coatings Technology, v.200, i.9, pp.3049-3055. | |
| - Modeling, simulation and optimization of a beer pasteurization Tunnel. E. Dilay, J.V.C. Vargas, S.C. Amico, J. C. Ordonez. Journal of Food Engineering, v.77, i.3, pp.500-513. | |
| - Computer modelling for the prediction of the in-plane permeability of non-crimp stitch bonded fabrics. C. Lekakou, S. Edwards, G. Bell, S.C. Amico. Composites Part A: Applied Science and Manufacturing, v.37, i.6, pp.820-825. | |
| - Socketing of polyester fibre ropes with epoxy resins for deep-water mooring applications. T.M. Schmidt, C. Bianchini, M.M.C. Forte, S.C. Amico, A. Voronoff, R.C.F. Gonçalves. Polymer Testing, v.25, i.8 pp.1044-1051. | |
|
|
| - Evaluation of the influence of chemical treatment on the tensile strength of sisal fibres by a Weibull distribution analysis. S.C. Amico, T.H.D. Sydenstricker, P.S.C.P. Silva. Metals, Materials and Processes, v.17, i.3-4, pp.233-242. | |
| - Studies on natural fibers of Brazil and green composites. K.G. Satyanarayana, F. Wypych, J.L. Guimarães, S.C. Amico, T.H.D. Sydenstricker, L.P. Ramos. Metals, Materials and Processes, v.17, i.3-4, pp.183-194. | |
| - Experimental investigation of various vegetable fibers as sorbent materials for oil spills. T.R. Annunciado, T.H.D. Sydenstricker, S.C. Amico. Marine Pollution Bulletin, v.50, i.11, pp.1340-1346. | |
| - A methodology for the evaluation of mechanical properties of sausage based on tensile and compression tests. F.G. Daros, M.L. Masson, S.C. Amico. International Journal of Food Engineering, v.1, i.3, Art. 5, pp.1-9. | |
| - Tensile and impact behavior of polypropylene/low density polyethylene blends. R. Strapasson, S.C. Amico, M.F.R. Pereira, T.H.D. Sydenstricker. Polymer Testing, v.24, i.4, pp.468-473. | |
| - A comprehensive characterization of chemically treated Brazilian sponge-gourds. V.O.A. Tanobe, T.H.D. Sydenstricker, M. Munaro, S.C. Amico. Polymer Testing, v.24, i.4, pp.474-482. | |
| - Experimental development of an intelligent refrigeration system. L.O. Buzelin, S.C. Amico, J.V.C. Vargas, J.A.R. Parise. International Journal of Refrigeration - Revue Internationale du Froid, v.28, i.2, pp.165-175. | |
| - Studies on the combined effect of injection temperature and fiber content on the properties of polypropylene-glass fiber composites. W.N. Ota, S.C. Amico, K.G. Satyanarayana. Composites Science and Technology, v.65, i.6, pp.873-881. | |
| - The influence of the addition of mechanically deboned poultry meat on the rheological properties of sausage. F.G. Daros, M.L. Masson, S.C. Amico. Journal of Food Engineering, v.68, i.2, pp.185-189. | |
|
|
| - Flow through a two-scale porosity, oriented fibre porous medium. S. Amico, C. Lekakou. Transport in Porous Media, v.54, i.1, pp.35-53. | |
|
|
| - Pull-out and other evaluations in sisal-reinforced polyester biocomposites. T. Sydenstricker, S. Mocnnacz, S.C. Amico. Polymer Testing, v.22, i.4, pp.375-380. | |
|
|
| - Axial impregnation of a fibre bundle. Part 1: Capillary experiments.S. C. Amico, C. Lekakou. Polymer Composites, v. 23, i.2, pp.249-263. | |
|
|
|
|